Hongzhi Zhang 
- : Properties of lightweight foamed concrete containing gold tailings as subgrade filler. In: Structural Concrete.
- (2024): Enhancing chloride ion permeability resistance of recycled aggregate concrete through internal curing with glazed hollow beads. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Prediction model for time-dependent drying shrinkage of recycled coarse and fine aggregate concrete based on internal relative humidity. In: Construction and Building Materials, v. 439 (August 2024).
- (2024): The Effects of Particle Packing and Inter-particle Force on Rheological Behaviors of Binary Cement Paste. In: KSCE Journal of Civil Engineering, v. 28, n. 5 (Februar 2024).
- (2024): A monitoring method of rail fastener reaction force based on iron pad strain. In: Construction and Building Materials, v. 418 (März 2024).
- (2023): Effect of white mud on properties of alkali activated slag. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Effect of particle size distribution on the pre-hydration, hydration kinetics, and mechanical properties of calcium sulfoaluminate cement. In: Construction and Building Materials, v. 398 (September 2023).
- (2023): Preparation of low-cost green engineered cementitious composites (ECC) using gold tailings and unoiled PVA fiber. In: Journal of Building Engineering, v. 78 (November 2023).
- (2019): Combined experimental and numerical study of uniaxial compression failure of hardened cement paste at micrometre length scale. In: Cement and Concrete Research, v. 126 (Dezember 2019).
- (2017): Experimentally validated multi-scale modelling scheme of deformation and fracture of cement paste. In: Cement and Concrete Research, v. 102 (Dezember 2017).
- (2023): Influence of fiber orientation on the mechanical responses of engineering cementitious composite (ECC) under various loading conditions. In: Journal of Building Engineering, v. 63 (Januar 2023).
- (2022): Effect of crack width and wet-dry cycles on the chloride penetration resistance of engineered cementitious composite (ECC). In: Construction and Building Materials, v. 352 (Oktober 2022).
- (2022): Numerical simulation of elastic buckling in 3D concrete printing using the lattice model with geometric nonlinearity. In: Automation in Construction, v. 142 (Oktober 2022).
- (2021): The features of different mineral admixtures affecting the self-healing capacity of cementitious-based materials. In: Construction and Building Materials, v. 297 (August 2021).
- (2021): Chemo-mechanical properties of alkali-activated slag/fly ash paste incorporating white mud. In: Construction and Building Materials, v. 291 (Juli 2021).
- (2021): Mesoscale insights on the structure, mechanical performances and the damage process of calcium-silicate-hydrate. In: Construction and Building Materials, v. 287 (Juni 2021).
- (2022): Fatigue life and cracking characterization of engineered cementitious composites (ECC) under flexural cyclic load. In: Construction and Building Materials, v. 335 (Juni 2022).
- (2022): Drying shrinkage, durability and microstructure of foamed concrete containing high volume lime mud-fly ash. In: Construction and Building Materials, v. 327 (April 2022).
- (2021): Durability and shrinkage performance of self-compacting concrete containing recycled fine clay brick aggregate. In: Construction and Building Materials, v. 308 (November 2021).
- (2021): Influence of an extrusion approach on the fiber orientation and mechanical properties of engineering cementitious composite. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): The Effect of the Addition of Graphene Nanoplatelets on the Selected Properties of Cementitious Composites. In: Frontiers in Built Environment, v. 7 (Januar 2021).
- (2021): Fresh and hardened properties of self-compacting concrete containing recycled fine clay brick aggregates. In: Materials and Structures, v. 54, n. 4 (2 Juli 2021).
- (2021): Modeling of microstructural effects on the creep of hardened cement paste using an experimentally informed lattice model. In: Computer-Aided Civil and Infrastructure Engineering, v. 36, n. 5 (Mai 2021).
- (2021): Experimentally validated peridynamic fracture modelling of mortar at the meso-scale. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2020): Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Discrete lattice fracture modelling of hydrated cement paste under uniaxial compression at micro-scale. In: Construction and Building Materials, v. 263 (Dezember 2020).
- (2020): Microstructure informed micromechanical modelling of hydrated cement paste: Techniques and challenges. In: Construction and Building Materials, v. 251 (August 2020).
- (2020): Micromechanical testing and modelling of blast furnace slag cement pastes. In: Construction and Building Materials, v. 239 (April 2020).
- (2019): Assessing Hydrated Cement Paste Properties Using Experimentally Informed Discrete Models. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 9 (September 2019).
- (2017): Experimental and numerical study of crack behaviour for capsule-based self-healing cementitious materials. In: Construction and Building Materials, v. 156 (Dezember 2017).
Structurae kooperiert mit
