Chao Zhang 
- (2024): Cyclic Behavior of Central Columns in Subway Stations Subjected to Highly Variable Axial Compression Ratio. In: Journal of Structural Engineering (ASCE), v. 150, n. 9 (September 2024).
- (2021): Critical Temperature of Axially Loaded Steel Members with Wide-Flange Shapes Exposed to Fire. In: Engineering Journal, v. 58, n. 1 (März 2021).
- (2024): Design and experiment of an innovative rotational two-level friction damper. In: Engineering Structures, v. 308 (Juni 2024).
- (2024): Cyclic behavior and shear strength of exterior reinforced concrete beam-column joints with inclined columns. In: Journal of Building Engineering, v. 90 (August 2024).
- (2023): Characterization and evaluation of coarse aggregate wearing morphology on mechanical properties of asphalt mixture. In: Construction and Building Materials, v. 388 (Juli 2023).
- (2023): Degradation mechanisms of polyurethane grouting materials under quasi-static and cyclic compression loading: Density and size effects. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2023): Collaborative recycling of red mud and FGD-gypsum into multi-shell cold bonded lightweight aggregates: Synergistic effect, structure design and application in sustainable concrete. In: Construction and Building Materials, v. 379 (Mai 2023).
- (2023): Development of composite action in a new long-span timber composite floor: Full-scale experiment and analytical approach. In: Engineering Structures, v. 279 (März 2023).
- (2022): Development of double-tangent method to determine transition points of three-stage permanent deformation of asphalt mixture. In: Materials and Structures, v. 55, n. 8 (16 September 2022).
- (2022): A cleaner polyurethane elastomer grouting material with high hardening strain for the fundamental rehabilitation: The comprehensive mechanical properties study. In: Construction and Building Materials, v. 318 (Februar 2022).
- (2017): Critical insights for advanced bridge scour detection using the natural frequency. In: Journal of Sound and Vibration, v. 386 (Januar 2017).
- (2022): Cyclic behavior of semi-rigid steel frame infilled with damping wall panels. In: Journal of Building Engineering, v. 51 (Juli 2022).
- (2022): Combined Utilization of Construction and Demolition Waste and Propylene Fiber in Cement-Stabilized Soil. In: Buildings, v. 12, n. 3 (8 März 2022).
- (2022): Clutching inerters enhanced tuned mass dampers for structural response mitigation under impulsive and seismic excitations. In: Structural Control and Health Monitoring, v. 29, n. 2 (10 Januar 2022).
- (2021): Developing fragility curves for asphalt mixture to assess the uncertainty of the permanent deformation performance. In: Construction and Building Materials, v. 310 (Dezember 2021).
- (2016): Damage detection based on sparse virtual element boundary measurement using metal-core piezoelectric fiber. In: Structural Health Monitoring, v. 17, n. 1 (Dezember 2016).
- (2021): Discussions on extension of traditional cohesive element for delamination modeling of laminates used in combination with phantom node intraply elements. In: Composite Structures, v. 261 (April 2021).
- (2021): Computational continua method and multilevel-multisite mesh refinement method for multiscale analysis of woven composites laminates. In: Composite Structures, v. 259 (März 2021).
- (2021): Design optimization of a novel bio-inspired 3D porous structure for crashworthiness. In: Composite Structures, v. 255 (Januar 2021).
- (2017): Characterization of fatigue damages in composite laminates using Lamb wave velocity and prediction of residual life. In: Composite Structures, v. 166 (April 2017).
- (2017): Comparison of periodic mesh and free mesh on the mechanical properties prediction of 3D braided composites. In: Composite Structures, v. 159 (Januar 2017).
- (2020): Creep effect on critical strength of high-strength steel columns exposed to fire. In: Engineering Structures, v. 220 (Oktober 2020).
- (2020): Deep learning method for detection of structural microcracks by Brillouin scattering based distributed optical fiber sensors. In: Smart Materials and Structures, v. 29, n. 7 (Mai 2020).
- (2020): Creep behavior and model of high-strength steels over 500 MPa at elevated temperatures. In: Journal of Constructional Steel Research, v. 168 (Mai 2020).
- (2013): Delamination Analysis of Layered Structures with Residual Stresses and Transverse Shear Deformation. In: Journal of Engineering Mechanics (ASCE), v. 139, n. 11 (November 2013).
- (2019): Development of a two-phased nonlinear mass damper for displacement mitigation in base-isolated structures. In: Soil Dynamics and Earthquake Engineering, v. 123 (August 2019).
- (2017): A closed-form solution for kinematic bending of end-bearing piles. In: Soil Dynamics and Earthquake Engineering, v. 103 (Dezember 2017).
- (2019): A design method of viscoelastic damper parameters based on the elastic-plastic response reduction curve. In: Soil Dynamics and Earthquake Engineering, v. 117 (Februar 2019).
- (2012): Creep effect on buckling of axially restrained steel columns in real fires. In: Journal of Constructional Steel Research, v. 71 (April 2012).
- (2015): Comparison of Housing Facility Management between Mainland China and Taiwan Region. In: Journal of Performance of Constructed Facilities (ASCE), v. 29, n. 4 (August 2015).
Structurae kooperiert mit
