Xiaohui Zeng 
- (2024): Defect detection within filling layer of subway slab ballastless track based on impulse response method. In: Engineering Structures, v. 315 (September 2024).
- (2024): Anti-cracking and shrinkage performance of sustainable concrete incorporating high-volume natural pozzolans: A case design for high-speed railway concrete slab tracks. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): Effect of low temperature calcined electrolytic manganese residue on the early-age hydration of cement paste. In: Construction and Building Materials, v. 387 (Juli 2023).
- (2023): Effects of shrinkage reducing admixture and internal curing agent on shrinkage and creep of high performance concrete. In: Journal of Building Engineering, v. 71 (Juli 2023).
- (2023): Effect of alternating current curing on properties of carbon black-cement conductive composite: Setting, hydration and microstructure. In: Journal of Building Engineering, v. 72 (August 2023).
- (2021): DEM analysis of the effect of interface transition zone on dynamic splitting tensile behavior of high-strength concrete based on multi-phase model. In: Cement and Concrete Research, v. 149 (November 2021).
- (2023): The combined effect of fiber and asphalt emulsion on properties of self‐compacting concrete. In: Structural Concrete, v. 24, n. 4 (5 Juli 2023).
- (2023): Influence of direct electric curing on the hydration and microstructure of cement paste excluding ohmic heating. In: Construction and Building Materials, v. 369 (März 2023).
- (2022): Evaluation of the Influence of Asphalt Emulsion on the Strength, Durability, and Damping Performance of Filling Layer Self-Compacting Concrete. In: KSCE Journal of Civil Engineering, v. 26, n. 12 (September 2022).
- (2022): Finite element analysis on properties evolution of slab track FLC under the coupling action of rainfall and fatigue load. In: Engineering Structures, v. 271 (November 2022).
- (2022): Effect of aggregate morphology characteristics on the voidage of aggregate loose packing based on 3D discrete element method. In: Construction and Building Materials, v. 348 (September 2022).
- (2022): Effects of intense ultraviolet irradiation on drying shrinkage and microstructural characteristics of cement mortar. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): Experimental investigation on flexural and compressive toughness of mortar and concrete with hybrid toughening materials. In: Structures, v. 43 (September 2022).
- (2022): Effect of alternating current field on rheology of fresh cement-based pastes. In: Journal of Building Engineering, v. 48 (Mai 2022).
- (2021): Hydration and multiscale pore structure characterization of steam-cured cement paste investigated by X-ray CT. In: Construction and Building Materials, v. 282 (Mai 2021).
- (2022): Effects of High Temperature on Creep Properties of Cement and Emulsified Asphalt Mortar. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 7 (Juli 2022).
- (2021): The effect of phase change materials on cement hydrate in steam-cured cement-based materials. In: Construction and Building Materials, v. 310 (Dezember 2021).
- (2021): Green ultra-high performance concrete with very low cement content. In: Construction and Building Materials, v. 303 (Oktober 2021).
- (2021): Experimental investigation on mechanical strength and microstructure of cement paste by electric curing with different voltage and frequency. In: Construction and Building Materials, v. 299 (September 2021).
- (2020): Deterioration of CA mortar filling layer under cyclical thermal loading. In: Construction and Building Materials, v. 259 (Oktober 2020).
- (2020): Effect of microlimestone on properties of self-consolidating concrete with manufactured sand and mineral admixture. In: Frontiers of Structural and Civil Engineering, v. 14, n. 6 (August 2020).
- (2020): Designing high impact-resistance self-compacting concrete by addition of asphalt-coated coarse aggregate. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Electrical resistivity and capillary absorption in mortar with styrene-acrylic emulsion and air-entrained agent: improvement and correlation with pore structure. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): The impact mechanical characteristics of steam-cured concrete under different curing temperature conditions. In: Construction and Building Materials, v. 241 (April 2020).
- (2018): Investigation of the capillary rise in cement-based materials by using electrical resistivity measurement. In: Construction and Building Materials, v. 173 (Juni 2018).
- (2018): Deterioration mechanism of CA mortar due to simulated acid rain. In: Construction and Building Materials, v. 168 (April 2018).
- (2019): A high-efficiency multidirectional wind energy harvester based on impact effect for self-powered wireless sensors in the grid. In: Smart Materials and Structures, v. 28, n. 11 (3 Oktober 2019).
- (2019): Hydration kinetics of cement composites with different admixtures at low temperatures. In: Construction and Building Materials, v. 225 (November 2019).
- (2012): Conductivity behavior of the fresh CA mortar and its relationship with the fluidity properties. In: Construction and Building Materials, v. 36 (November 2012).
- (2017): Degradation mechanism of CA mortar in CRTS I slab ballastless railway track in the Southwest acid rain region of China – Materials analysis. In: Construction and Building Materials, v. 149 (September 2017).
Structurae kooperiert mit
