Xiang Yu 
- : Genetic algorithm optimized frequency‐domain convolutional blind source separation for multiple leakage locations in water supply pipeline. In: Computer-Aided Civil and Infrastructure Engineering.
- (2025): Broadband and robust vibration reduction in lattice-core sandwich beam with 3D-printed QZS resonators. In: Composite Structures, v. 352 (Januar 2025).
- (2024): Liquefaction-induced large deformation method with automatic time-step mapping and interfacial interpolation improvement: Case study of the San Fernando dam. In: Computers and Geotechnics, v. 171 (Juli 2024).
- (2024): Comparative study on the mechanical properties of solidified silty-fine sand reinforced by permeable polymer and traditional grouting materials. In: Construction and Building Materials, v. 419 (März 2024).
- (2024): Multi-leakage localization in water supply pipes based on convolutional blind source separation. In: Tunnelling and Underground Space Technology, v. 144 (Februar 2024).
- (2023): Mesoscopic analysis and intra-layer progressive failure model of fused filament fabrication 3D printing GFRP. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Adaptive leak signal extraction based on EMD-CC for water pipeline leak location. In: Structures, v. 56 (Oktober 2023).
- (2023): Experimental study on bio-treatment effect of the dredged Yellow River silt based on soybean urease induced calcium carbonate precipitation. In: Journal of Building Engineering, v. 75 (September 2023).
- (2023): Damage evolution process of fiber-reinforced backfill based on acoustic emission three-dimensional localization. In: Composite Structures, v. 309 (April 2023).
- (2022): Experimental Investigation and Numerical Verification on Diffusion of Permeable Polymers in Sandy Soils with Considering Grouting Parameters. In: International Journal of Civil Engineering, v. 21, n. 4 (22 Dezember 2022).
- (2023): Reconfigurable origami-inspired window for tunable noise reduction and air ventilation. In: Building and Environment, v. 227 (Januar 2023).
- (2023): Novel slow-sound lattice absorbers based on the sonic black hole. In: Composite Structures, v. 304 (Januar 2023).
- (2022): Recycling of dredged river silt reinforced by an eco-friendly technology as microbial induced calcium carbonate precipitation (MICP). In: Soils and Foundations, v. 62, n. 6 (Dezember 2022).
- (2022): Reliability and parameter sensitivity analysis on geosynthetic-reinforced slope with considering spatially variability of soil properties. In: Construction and Building Materials, v. 350 (Oktober 2022).
- (2022): Investigation on the mechanical properties of shale subjected to different conditions based on nanoindentation experiments and numerical simulation. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Bell-and-spigot joints mechanical properties study of PCCP under the uneven settlement of foundation: Simulation and full-scale test. In: Structures, v. 43 (September 2022).
- : Fracture evolution of fiber-reinforced backfill based on acoustic emission fractal dimension and b-value. In: Case Studies in Construction Materials.
- (2022): Investigation of failure mechanism of cement-fiber-tailings matrix composites using digital image correlation and acoustic emission. In: Construction and Building Materials, v. 335 (Juni 2022).
- (2021): Overall grouting compactness detection of bridge prestressed bellows based on RF feature selection and the GA-SVM model. In: Construction and Building Materials, v. 301 (September 2021).
- (2021): Refined numerical simulation of a concrete cut-off wall in the thick overburden of dam foundation. In: Structures, v. 33 (Oktober 2021).
- (2021): Cyclic interface behavior of non-water reactive polymer and concrete during dam restoration. In: Structures, v. 34 (Dezember 2021).
- (2021): Reliability Analysis of 3D Rockfill Dam Slope Stability Based on the Copula Function. In: International Journal of Geomechanics, v. 21, n. 3 (März 2021).
- (2018): Predicting integrated thermal and acoustic performance in naturally ventilated high-rise buildings using CFD and FEM simulation. In: Building Simulation, v. 11, n. 3 (März 2018).
- (2020): Acoustic emission fractal characteristics and mechanical damage mechanism of cemented paste backfill prepared with tantalum niobium mine tailings. In: Construction and Building Materials, v. 258 (Oktober 2020).
- (2021): On acoustic emission characteristics, initiation crack intensity, and damage evolution of cement-paste backfill under uniaxial compression. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2021): Case Study on Safety Assessment of Rockfall and Splash Stone Protective Structures for Secondary Excavation of Highway Slope. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2020): Acoustic emission investigation of cemented paste backfill prepared with tantalum–niobium tailings. In: Construction and Building Materials, v. 237 (März 2020).
- (2019): A cross‐scale refined damage evolution analysis of large commercial aircraft crashing into a nuclear power plant. In: The Structural Design of Tall and Special Buildings, v. 28, n. 16 (November 2019).
- (2018): Construction of the Kaifeng Outer City Wall and the Form of the City Gate of Northern Song Dynasty. Vorgetragen bei: 2012 International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2012), August 10-12th 2012, Zhangjiajie (China).
- (2018): Reconfigurable origami silencers for tunable and programmable sound attenuation. In: Smart Materials and Structures, v. 27, n. 9 (September 2018).
Structurae kooperiert mit
