- Impact of polycarboxylate superplasticizer dosage on controlled low strength material flowability and bleeding: Insights from water film thickness. In: Construction and Building Materials, v. 447 (Oktober 2024). (2024):
- Vibration characteristics, attenuation law and prediction method in the near field of tunnel blasting. In: Case Studies in Construction Materials, v. 19 (Dezember 2023). (2023):
- Experimental study of the influence of inclined pre-cracks on shear behavior of RC beams without transverse reinforcement. In: Engineering Structures, v. 299 (Januar 2024). (2024):
- Crack detection and quantification for concrete structures using UAV and transformer. In: Automation in Construction, v. 152 (August 2023). (2023):
- Properties of Flue Gas Desulphurization Gypsum–Activated Steel Slag Fine Aggregate Red Mud–Based Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 4 (April 2023). (2023):
- IFC‐ based semantic modeling of damaged RC beams using 3D point clouds. In: Structural Concrete, v. 24, n. 1 (Februar 2023). (2023):
- Influencing factors of mechanical and thermal conductivity of foamed phosphogypsum-based composite cementitious materials. In: Construction and Building Materials, v. 346 (September 2022). (2022):
- (2022): Proportion and Performance Optimization of Lightweight Foamed Phosphogypsum Material Based on an Orthogonal Experiment. In: Buildings, v. 12, n. 2 (18 Januar 2022).
- Automated finite element modeling and analysis of cracked reinforced concrete beams from three dimensional point cloud. In: Structural Concrete, v. 22, n. 6 (Dezember 2021). (2021):
- Evaluating the impact of the building density and height on the block surface temperature. In: Building and Environment, v. 168 (Januar 2020). (2020):
- (2014): Research on the Design and Detailing of a Re-constructional High-rise uilding Structure Project Reconstruction. In: The Open Construction and Building Technology Journal, v. 8, n. 1 (Dezember 2014).
- Source location using an optimized microfiber coupler sensor based on modal acoustic emission method. In: Structural Control and Health Monitoring, v. 24, n. 11 (November 2017). (2017):