0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Ben Young ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Chen, Man-Tai / Young, Ben / Martins, André Dias / Camotim, Dinar / Dinis, Pedro Borges (2021): Experimental investigation on cold-formed steel lipped channel beams affected by local-distortional interaction under non-uniform bending. In: Thin-Walled Structures, v. 161 (April 2021).

    https://doi.org/10.1016/j.tws.2021.107494

  2. Li, Qiu-Yun / Young, Ben (2022): Experimental and numerical investigation on cold-formed steel built-up section pin-ended columns. In: Thin-Walled Structures, v. 170 (Januar 2022).

    https://doi.org/10.1016/j.tws.2021.108444

  3. Chen, Man-Tai / Young, Ben / Martins, André Dias / Camotim, Dinar / Dinis, Pedro Borges (2020): Experimental investigation on cold-formed steel stiffened lipped channel columns undergoing local-distortional interaction. In: Thin-Walled Structures, v. 150 (Mai 2020).

    https://doi.org/10.1016/j.tws.2020.106682

  4. Li, Hai-Ting / Jin, Chun-Chi / Li, Qiu-Yun / Young, Ben (2024): Experimental investigation of cold-formed stainless steel built-up closed section stub columns. In: Engineering Structures, v. 306 (Mai 2024).

    https://doi.org/10.1016/j.engstruct.2024.117657

  5. Young, Ben / Ellobody, Ehab (2023): Experimental investigation on cold-formed steel Z-sections having different stiffened flanges undergoing web crippling. In: Engineering Structures, v. 286 (Juli 2023).

    https://doi.org/10.1016/j.engstruct.2023.116144

  6. Li, Qiu-Yun / Young, Ben (2023): Experimental and numerical studies on cold-formed steel battened columns. In: Engineering Structures, v. 288 (August 2023).

    https://doi.org/10.1016/j.engstruct.2023.116110

  7. Zhao, Ou / Rossi, Barbara / Gardner, Leroy / Young, Ben (2016): Experimental and Numerical Studies of Ferritic Stainless Steel Tubular Cross Sections under Combined Compression and Bending. In: Journal of Structural Engineering (ASCE), v. 142, n. 2 (Februar 2016).

    https://doi.org/10.1061/(asce)st.1943-541x.0001366

  8. Chen, Man-Tai / Chen, Yangyu / Young, Ben (2023): Experimental investigation on cold-formed steel elliptical hollow section T-joints. In: Engineering Structures, v. 283 (Mai 2023).

    https://doi.org/10.1016/j.engstruct.2023.115593

  9. Li, Shuai / Chan, Tak-Ming / Young, Ben (2023): Experimental investigation on axial compressive behavior of novel FRP-ECC-HSC composite short column. In: Composite Structures, v. 303 (Januar 2023).

    https://doi.org/10.1016/j.compstruct.2022.116285

  10. Zhong, Yukai / Zhao, Ou / Young, Ben (2022): Experimental and numerical investigations of recycled aggregate concrete-filled stainless steel tube stub columns under combined compression and bending. In: Engineering Structures, v. 266 (September 2022).

    https://doi.org/10.1016/j.engstruct.2022.114502

  11. Jiang, Ke / Zhao, Ou / Young, Ben (2022): Experimental and numerical study of stainless steel channel-to-gusset plate connections. In: Engineering Structures, v. 265 (August 2022).

    https://doi.org/10.1016/j.engstruct.2022.114461

  12. Pandey, Madhup / Young, Ben (2021): Experimental investigation on stress concentration factors of cold-formed high strength steel tubular X-joints. In: Engineering Structures, v. 243 (September 2021).

    https://doi.org/10.1016/j.engstruct.2021.112408

  13. Sun, Yao / Liang, Yating / Zhao, Ou / Young, Ben (2021): Experimental and Numerical Investigations of S690 High-Strength Steel Welded I-Sections under Combined Compression and Bending. In: Journal of Structural Engineering (ASCE), v. 147, n. 5 (Mai 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002991

  14. Fang, Han / Chan, Tak-Ming / Young, Ben (2021): Experimental and Numerical Investigations of Octagonal High-Strength Steel Tubular Stub Columns under Combined Compression and Bending. In: Journal of Structural Engineering (ASCE), v. 147, n. 1 (Januar 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002848

  15. Chen, Ju / Young, Ben (2007): Experimental investigation of cold-formed steel material at elevated temperatures. In: Thin-Walled Structures, v. 45, n. 1 (Januar 2007).

    https://doi.org/10.1016/j.tws.2006.11.003

  16. Feng, Ran / Young, Ben (2008): Experimental investigation of cold-formed stainless steel tubular T-joints. In: Thin-Walled Structures, v. 46, n. 10 (Oktober 2008).

    https://doi.org/10.1016/j.tws.2008.01.008

  17. Huang, Yuner / Young, Ben (2014): Experimental investigation of cold-formed lean duplex stainless steel beam-columns. In: Thin-Walled Structures, v. 76 (März 2014).

    https://doi.org/10.1016/j.tws.2013.11.006

  18. Young, Ben / Ellobody, Ehab (2006): Experimental investigation of concrete-filled cold-formed high strength stainless steel tube columns. In: Journal of Constructional Steel Research, v. 62, n. 5 (Mai 2006).

    https://doi.org/10.1016/j.jcsr.2005.08.004

  19. Zhou, Feng / Young, Ben (2007): Experimental and numerical investigations of cold-formed stainless steel tubular sections subjected to concentrated bearing load. In: Journal of Constructional Steel Research, v. 63, n. 11 (November 2007).

    https://doi.org/10.1016/j.jcsr.2006.12.007

  20. Young, Ben (2008): Experimental and numerical investigation of high strength stainless steel structures. In: Journal of Constructional Steel Research, v. 64, n. 11 (November 2008).

    https://doi.org/10.1016/j.jcsr.2008.05.004

  21. Chen, Man-Tai / Young, Ben (2018): Experimental and numerical investigation on cold-formed steel semi-oval hollow section compression members. In: Journal of Constructional Steel Research, v. 151 (Dezember 2018).

    https://doi.org/10.1016/j.jcsr.2018.09.009

  22. Zhang, Jia-Hui / Young, Ben (2018): Experimental investigation of cold-formed steel built-up closed section columns with web stiffeners. In: Journal of Constructional Steel Research, v. 147 (August 2018).

    https://doi.org/10.1016/j.jcsr.2018.04.008

  23. Zhu, Ji-Hua / Young, Ben (2006): Experimental investigation of aluminum alloy circular hollow section columns. In: Engineering Structures, v. 28, n. 2 (Januar 2006).

    https://doi.org/10.1016/j.engstruct.2005.07.012

  24. Li, Hai-Ting / Young, Ben (2018): Experimental Investigation of Concrete-Filled High-Strength Steel Tubular X Joints. In: Journal of Structural Engineering (ASCE), v. 144, n. 10 (Oktober 2018).

    https://doi.org/10.1061/(asce)st.1943-541x.0002176

  25. Feng, Ran / Young, Ben (2015): Experimental Investigation of Aluminum Alloy Stub Columns with Circular Openings. In: Journal of Structural Engineering (ASCE), v. 141, n. 11 (November 2015).

    https://doi.org/10.1061/(asce)st.1943-541x.0001265

  26. Ma, Jia-Lin / Chan, Tak-Ming / Young, Ben (2016): Experimental investigation of cold-formed high strength steel tubular beams. In: Engineering Structures, v. 126 (November 2016).

    https://doi.org/10.1016/j.engstruct.2016.07.027

  27. Young, Ben / Liu, Yahua (2003): Experimental Investigation of Cold-Formed Stainless Steel Columns. In: Journal of Structural Engineering (ASCE), v. 129, n. 2 (Februar 2003).

    https://doi.org/10.1061/(asce)0733-9445(2003)129:2(169)

  28. Zhu, Ji-Hua / Young, Ben (2006): Experimental Investigation of Aluminum Alloy Thin-Walled Tubular Members in Combined Compression and Bending. In: Journal of Structural Engineering (ASCE), v. 132, n. 12 (Dezember 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:12(1955)

  29. Zhou, Feng / Young, Ben (2007): Experimental Investigation of Cold-Formed High-Strength Stainless Steel Tubular Members Subjected to Combined Bending and Web Crippling. In: Journal of Structural Engineering (ASCE), v. 133, n. 7 (Juli 2007).

    https://doi.org/10.1061/(asce)0733-9445(2007)133:7(1027)

  30. Young, Ben (2005): Experimental Investigation of Cold-Formed Steel Lipped Angle Concentrically Loaded Compression Members. In: Journal of Structural Engineering (ASCE), v. 131, n. 9 (September 2005).

    https://doi.org/10.1061/(asce)0733-9445(2005)131:9(1390)

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine