Doo-Yeol Yoo 
- (2024): Benefits of CaCO3 nanoparticles for the strain hardening behavior of high-strength alkali-activated composites based on blast furnace slag and liquid crystal display glass powder. In: Construction and Building Materials, v. 449 (Oktober 2024).
- (2024): Carbonation mechanism and cementation properties of recycled cement paste based on CO2 injection time and pressure. In: Construction and Building Materials, v. 447 (Oktober 2024).
- (2024): Development of Carbon Consuming Concrete (CCC) using CO2 captured nanobubble water. In: Construction and Building Materials, v. 432 (Juni 2024).
- (2024): Effect of conductive surface-coated polyethylene fiber on the electrical and mechanical properties of high-performance fiber-reinforced cementitious composites. In: Construction and Building Materials, v. 425 (April 2024).
- (2023): Design and performance evaluation of an electrically heated concrete panel for sustainable winter maintenance. In: Developments in the Built Environment, v. 16 (Dezember 2023).
- (2024): A critical review on shear performance of joints in precast Ultra-High-Performance Concrete (UHPC) segmental bridges. In: Engineering Structures, v. 301 (Februar 2024).
- (2023): Development of foam concrete with nitrogen oxides removal capability using various forms of titanium dioxide. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): Bond performance of reinforcing bars in SFRC: Experiments and meso-mechanical model. In: Composite Structures, v. 318 (August 2023).
- (2019): Effect of calcium sulfoaluminate-based expansive agent on rate dependent pullout behavior of straight steel fiber embedded in UHPC. In: Cement and Concrete Research, v. 122 (August 2019).
- (2020): Assessment of steel fiber corrosion in self-healed ultra-high-performance fiber-reinforced concrete and its effect on tensile performance. In: Cement and Concrete Research, v. 133 (Juli 2020).
- (2023): Development of Ca-rich slag-based ultra-high-performance fiber-reinforced geopolymer concrete (UHP-FRGC): Effect of sand-to-binder ratio. In: Construction and Building Materials, v. 370 (März 2023).
- (2023): A combination of liquid–crystal display glass powder and slag in alkali-activated material. In: Construction and Building Materials, v. 369 (März 2023).
- (2021): Benefits of TiO2 photocatalyst on mechanical properties and nitrogen oxide removal of ultra-high-performance concrete. In: Construction and Building Materials, v. 285 (Mai 2021).
- (2021): Benefits of chemically treated steel fibers on enhancing the interfacial bond strength from ultra-high-performance concrete. In: Construction and Building Materials, v. 294 (August 2021).
- (2022): Development of strain-hardening geopolymer mortar based on liquid-crystal display (LCD) glass and blast furnace slag. In: Construction and Building Materials, v. 331 (Mai 2022).
- (2021): Development of impact resistant high-strength strain-hardening cementitious composites (HS-SHCC) superior to reactive powder concrete (RPC) under flexure. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2014): Autogenous shrinkage of ultra high performance concrete considering early age coefficient of thermal expansion. In: Structural Engineering and Mechanics, v. 49, n. 6 (März 2014).
- (2020): Analysis on enhanced pullout resistance of steel fibers in ultra-high performance concrete under cryogenic condition. In: Construction and Building Materials, v. 251 (August 2020).
- (2020): Cryogenic pullout behavior of steel fibers from ultra-high-performance concrete under impact loading. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Development of 300 MPa ultra-high-strength mortar through a special curing regime. In: Construction and Building Materials, v. 171 (Mai 2018).
- (2018): Comparative shrinkage behavior of ultra-high-performance fiber-reinforced concrete under ambient and heat curing conditions. In: Construction and Building Materials, v. 162 (Februar 2018).
- (2019): Bond-slip response of novel half-hooked steel fibers in ultra-high-performance concrete. In: Construction and Building Materials, v. 224 (November 2019).
- (2015): Cracking Behavior of Posttensioning Grout with Various Strand-to-Duct Area Ratios. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 6 (Juni 2015).
- (2013): Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete. In: Construction and Building Materials, v. 41 (April 2013).
- (2017): Comparative flexural behavior of ultra-high-performance concrete reinforced with hybrid straight steel fibers. In: Construction and Building Materials, v. 132 (Februar 2017).
- (2017): Development of cost effective ultra-high-performance fiber-reinforced concrete using single and hybrid steel fibers. In: Construction and Building Materials, v. 150 (September 2017).
- (2014): Benefits of using expansive and shrinkage-reducing agents in UHPC for volume stability. In: Magazine of Concrete Research, v. 66, n. 14 (Juli 2014).
- (2013): Drying shrinkage cracking characteristics of ultra-high-performance fibre reinforced concrete with expansive and shrinkage reducing agents. In: Magazine of Concrete Research, v. 65, n. 4 (Februar 2013).
- (2011): Autogenous shrinkage of concrete with design strength 60–120 N/mm². In: Magazine of Concrete Research, v. 63, n. 10 (Oktober 2011).
- (2018): Bond Behavior of Pretensioned Strand Embedded in Ultra-High-Performance Fiber-Reinforced Concrete. In: International Journal of Concrete Structures and Materials, v. 12, n. 1 (Oktober 2018).
Structurae kooperiert mit
