Mohammad Yekrangnia 
- (2024): Experimental study on seismic performance of squat RC shear walls reinforced with hybrid steel and GFRP rebars. In: Structures, v. 64 (Juni 2024).
- (2024): Investigation of punching shear performance in concrete slabs reinforced with GFRP and synthetic fibers: An experimental study. In: Engineering Structures, v. 311 (Juli 2024).
- (2024): Prediction of pull-out behavior of timber glued-in glass fiber reinforced polymer and steel rods under various environmental conditions based on ANN and GEP models. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Predicting the shear capacity of composite steel plate shear wall with the application of RSM. In: Engineering Structures, v. 301 (Februar 2024).
- (2023): Ensemble machine learning-based approach with genetic algorithm optimization for predicting bond strength and failure mode in concrete-GFRP mat anchorage interface. In: Structures, v. 57 (November 2023).
- (2023): Explainable XGBoost machine learning model for prediction of ultimate load and free end slip of GFRP rod glued-in timber joints through a pull-out test under various harsh environmental conditions. In: Asian Journal of Civil Engineering, v. 25, n. 1 (Juli 2023).
- (2023): Effects of RC ties on seismic performance improvement of confined masonry walls under combined in-plane, out-of-plane, and vertical loads. In: Engineering Structures, v. 293 (Oktober 2023).
- (2023): Bond durability between anchored GFRP bar and seawater concrete under offshore environmental conditions. In: Materials and Structures, v. 56, n. 3 (3 März 2023).
- (2023): In-plane, out-of-plane, and in-plane/out-of-plane interactional behavior of masonry-infilled steel MRFs with different frame components flexibilities and considering openings. In: Journal of Building Engineering, v. 74 (September 2023).
- (2023): Cyclic behavior of GFRP-reinforced concrete one-way slabs with synthetic fibers. In: Journal of Building Engineering, v. 65 (April 2023).
- (2022): Residual flexural capacity of pre-cracked RC beams exposed to chloride penetration at the sea surface temperature. In: Construction and Building Materials, v. 343 (August 2022).
- (2022): Bond-slip behaviour between GFRP/steel bars and seawater concrete after exposure to environmental conditions. In: Engineering Structures, v. 268 (Oktober 2022).
- (2022): Performance of glued-in rod timber joints under seawater and UV exposure cycles. In: Construction and Building Materials, v. 322 (März 2022).
- (2022): Effect of spiral transverse bars on structural behavior of concrete shear walls reinforced with GFRP bars. In: Journal of Building Engineering, v. 55 (September 2022).
- (2022): Cyclic performance assessment of damaged unreinforced masonry walls repaired with steel mesh reinforced shotcrete. In: Engineering Structures, v. 253 (Februar 2022).
- (2021): Post-Earthquake Damage Assessment of Buildings: Comprehensive Experimentally-based Maximum Drift Ratio Predictive Model Based on Residual Drift Ratio. In: Journal of Earthquake Engineering, v. 26, n. 13 (Oktober 2021).
- (2021): Numerical Study on An Innovative Elastomeric‐Steel Cushion Damper. In: ce/papers, v. 4, n. 2-4 (September 2021).
- (2021): Experimental study on the effect of square opening size and location on cyclic response of steel plate shear walls. In: Structures, v. 33 (Oktober 2021).
- (2021): Effect of elevated temperatures on the compressive behavior of timber filled steel and pultruded GFRP tubes. In: Composite Structures, v. 271 (September 2021).
- (2021): Experimental investigation of residual flexural capacity of damaged reinforced concrete beams exposed to elevated temperatures. In: Engineering Structures, v. 240 (August 2021).
- (2021): Experimental cyclic performance of steel shear walls with single rectangular opening. In: The Structural Design of Tall and Special Buildings, v. 30, n. 2 (10 Februar 2021).
- (2020): Multi-strut macro-model for masonry infilled frames with openings. In: Journal of Building Engineering, v. 32 (November 2020).
- (2017): Force-displacement model for solid confined masonry walls with shear-dominated failure mode. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 13 (25 Oktober 2017).
- (2015): Out-of-plane strength reduction of unreinforced masonry walls because of in-plane damages. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 13 (25 Oktober 2015).
- (2015): Predictive Tri-Linear Benchmark Curve for In-Plane Behavior of Adobe Walls. In: International Journal of Architectural Heritage, v. 9, n. 8 (November 2015).
- (2017): A new strut model for solid masonry infills in steel frames. In: Engineering Structures, v. 135 (März 2017).
- (2017): Field Observation and Vulnerability Assessment of Gonbad-e Qābus. In: Journal of Architectural Engineering (ASCE), v. 23, n. 4 (Dezember 2017).
- (2016): Restoration of Historical Al-Askari Shrine. I: Field Observations, Damage Detection, and Material Properties. In: Journal of Performance of Constructed Facilities (ASCE), v. 30, n. 3 (Juni 2016).
- (2014): Bidirectional behavior of unreinforced masonry walls. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 15 (Dezember 2014).
- (2016): Experimental and numerical evaluation of proposed precast concrete connections. In: Structural Concrete, v. 17, n. 6 (Dezember 2016).
Structurae kooperiert mit
