Halit Yazıcı 
- (2023): Effect of internal curing on shrinkage and cracking potential under autogenous and drying conditions. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2005): Effect of steam curing on class C high-volume fly ash concrete mixtures. In: Cement and Concrete Research, v. 35, n. 6 (Juni 2005).
- (2023): Corrosion Performance of Various Reinforced Concretes Subjected to a Systematic Wetting–Drying Cycle Regime in Real Marine Environment. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 5 (Mai 2023).
- (2021): Evaluation of enhanced autogenous self-healing ability of UHPC mixtures. In: Construction and Building Materials, v. 280 (April 2021).
- (2022): Alkali-silica reaction of sanitary ware ceramic wastes utilized as aggregate in ordinary and high-performance mortars. In: Construction and Building Materials, v. 319 (Februar 2022).
- (2018): Comparison of Recycled Glass and Recycled Concrete Aggregates Bearing Mortar Mixtures Exposed to High Temperature, Abrasion and Drying. In: Journal of Green Building, v. 13, n. 4 (September 2018).
- (2020): Improvement on Flexural Performance of UHPFRC with Hybrid Steel Fiber. In: Teknik Dergi, v. 31, n. 6 (November 2020).
- (2017): Bazalt ve Atık Cam Agregalı Betonlarda Alkali-Silis Reaksiyonu Genleşmeleri ve Alkali Sızıntısı Seviyeleri. In: Teknik Dergi, v. 28, n. 2 (April 2017).
- (2019): Hybrid fiber use on flexural behavior of ultra high performance fiber reinforced concrete beams. In: Composite Structures, v. 229 (Dezember 2019).
- (2007): Effects of cement type, water/cement ratio and cement content on sea water resistance of concrete. In: Building and Environment, v. 42, n. 4 (April 2007).
- (2007): The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures. In: Building and Environment, v. 42, n. 5 (Mai 2007).
- (2019): Early-age shrinkage properties of eco-friendly reactive powder concrete with reduced cement content. In: European Journal of Environmental and Civil Engineering, v. 26, n. 2 (Oktober 2019).
- (2019): Novel Test Method for Assessing Bonding Capacity of Self-Healing Products in Cementitious Composites. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 4 (April 2019).
- (2010): Improvement on SIFCON Performance by Fiber Orientation and High-Volume Mineral Admixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 11 (November 2010).
- (2014): Mitigation of Detrimental Effects of Alkali-Silica Reaction in Cement-Based Composites by Combination of Steel Microfibers and Ground-Granulated Blast-Furnace Slag. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 12 (Dezember 2014).
- (2008): High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibers. In: Construction and Building Materials, v. 22, n. 4 (April 2008).
- (2008): The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete. In: Construction and Building Materials, v. 22, n. 4 (April 2008).
- (2009): Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes. In: Construction and Building Materials, v. 23, n. 3 (März 2009).
- (2012): The effect of steel micro-fibers on ASR expansion and mechanical properties of mortars. In: Construction and Building Materials, v. 30 (Mai 2012).
- (2012): Pull-out behavior of single steel fiber from SIFCON matrix. In: Construction and Building Materials, v. 35 (Oktober 2012).
- (2013): The effect of autoclave pressure, temperature and duration time on mechanical properties of reactive powder concrete. In: Construction and Building Materials, v. 42 (Mai 2013).
- (2014): Effect of surface treatment methods on the properties of self-compacting concrete with recycled aggregates. In: Construction and Building Materials, v. 64 (August 2014).
- (2015): Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar. In: Construction and Building Materials, v. 75 (Januar 2015).
- (2015): Properties of ultra-high performance fiber reinforced cementitious composites made with gypsum-contaminated aggregates and cured at normal and elevated temperatures. In: Construction and Building Materials, v. 93 (September 2015).
- (2016): Flexural performance of SIFCON composites subjected to high temperature. In: Construction and Building Materials, v. 104 (Februar 2016).
- (2016): The effect of aggregates with high gypsum content on the performance of ultra-high strength concretes and Portland cement mortars. In: Construction and Building Materials, v. 110 (Mai 2016).
- (2016): Rheological and fresh properties of self-compacting concretes containing coarse and fine recycled concrete aggregates. In: Construction and Building Materials, v. 113 (Juni 2016).
- (2017): Effects of ambient temperature and relative humidity on early-age shrinkage of UHPC with high-volume mineral admixtures. In: Construction and Building Materials, v. 144 (Juli 2017).
- (2019): Comparing the alkali-silica reaction mitigation potential of admixtures by using different accelerated test methods. In: Construction and Building Materials, v. 197 (Februar 2019).
- (2016): Influence of water/powder ratio and powder type on alkali–silica reactivity and transport properties of self-consolidating concrete. In: Materials and Structures, v. 49, n. 1-2 (Januar 2016).
Structurae kooperiert mit
