Yi Yang 
- (2024): Resistance characteristics of Y-shaped sleepers for ballasted track under slope influence. In: Construction and Building Materials, v. 449 (Oktober 2024).
- (2024): Modeliranje električne vodljivosti grafitom modificiranog asfaltbetona na temelju mikromehanike (Modelling for the electrical conductivity of graphite-modified asphalt concrete based on micromechanics). In: Građevinar, v. 76, n. 9 (Oktober 2024).
- (2024): Laboratory aging method for simulating the extracted aged asphalt from reclaimed asphalt pavement. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): A new equilibrium temperature inflow profile for modelling the non-isothermal atmospheric boundary layer in CFD simulation. In: Building and Environment, v. 262 (August 2024).
- (2024): Multi-objective optimization of morphology for high-rise residential cluster with the regards to energy use and microclimate. In: Energy and Buildings, v. 319 (September 2024).
- (2024): Parameter characterization of variable bending stiffness module with electrostatic layer jamming based on giant electrorheological fluid. In: Smart Materials and Structures, v. 33, n. 6 (Mai 2024).
- (2023): Model test on deformation and failure mechanism of tunnel support with layered rock mass under high ground stress. In: Engineering Failure Analysis, v. 150 (August 2023).
- : Optimal Design and Performance Evaluation of HMDV Inertial Suspension Based on Generalized Skyhook Control. In: International Journal of Structural Stability and Dynamics.
- (2024): Multivariate joint distribution of five-dimensional wind and wave parameters in the sea-crossing bridge region using Hierarchical Archimedean Copulas. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 247 (April 2024).
- (2024): Optimal Design of Tilted Building Envelope Considering Air Conditioning Energy Demand, Daylight Utilization and Glare Protection—Case Study. In: Buildings, v. 14, n. 2 (1 Februar 2024).
- (2023): Quantitative evaluation on the energy saving and emission reduction characteristics of warm mix asphalt mixtures. In: Construction and Building Materials, v. 407 (Dezember 2023).
- (2023): Investigations of synoptic wind profile patterns in complex urban areas based on LiDAR measurements. In: Building and Environment, v. 242 (August 2023).
- (2023): Method for calculating pressure losses in the pipelines of slurry shield tunneling based on coupled simulation of computational fluid dynamics and discrete element method. In: Computer-Aided Civil and Infrastructure Engineering, v. 39, n. 2 (August 2023).
- (2023): Numerical study on the muck flow behavior in the screw conveyor during EPB shield tunneling. In: Tunnelling and Underground Space Technology, v. 134 (April 2023).
- (2023): A new pressure gradient model of slurry shield pipeline system coupling with rheological properties and wall slip behaviour under sandy stratum. In: Tunnelling and Underground Space Technology, v. 134 (April 2023).
- (2023): Reconstruction of boundary layer wind field at the SEG plaza based on dual-lidar measurement and numerical simulation. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 233 (Februar 2023).
- (2023): Molecular dynamics simulation investigation on the anti-freezing mechanisms of CSH-GS/GO interfaces. In: Construction and Building Materials, v. 369 (März 2023).
- (2022): A Numerical Method for Solving Global Irradiance on the Facades of Building Stocks. In: Buildings, v. 12, n. 11 (27 Oktober 2022).
- (2022): Low temperature performance evaluation of asphalt binders and mastics based on relaxation characteristics. In: Materials and Structures, v. 55, n. 7 (5 August 2022).
- (2021): Reactive molecular dynamic investigation of the oxidative aging impact on asphalt. In: Construction and Building Materials, v. 279 (April 2021).
- (2023): Motion planning for efficient and safe module transportation in modular integrated construction. In: Computer-Aided Civil and Infrastructure Engineering, v. 38, n. 5 (März 2023).
- (2021): Probabilistic analysis of secant piles with random geometric imperfections. In: Frontiers of Structural and Civil Engineering, v. 15, n. 3 (Juni 2021).
- (2021): Prediction of Intraformational Remaining Oil Distribution Based on Reservoir Heterogeneity: Application to the J-Field. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2017): Research on differences and correlation between tensile, compression and flexural moduli of cement stabilized macadam. In: Frattura ed Integrità Strutturale, v. 11, n. 41 (Juni 2017).
- (2013): Numerical simulation of wind loading on roadside noise mitigation structures. In: Wind & Structures, v. 17, n. 3 (September 2013).
- (2020): Methodology on a novel magnetorheological valve controlled damper synthesis design. In: Smart Materials and Structures, v. 29, n. 4 (Februar 2020).
- (2018): A new inflow turbulence generator for large eddy simulation evaluation of wind effects on a standard high-rise building. In: Building and Environment, v. 138 (Juni 2018).
- (2018): Numerical and experimental study on airborne disinfection by negative ions in air duct flow. In: Building and Environment, v. 127 (Januar 2018).
- (2009): New inflow boundary conditions for modelling the neutral equilibrium atmospheric boundary layer in computational wind engineering. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 97, n. 2 (Februar 2009).
- (2016): Real-time observation of meso-fracture process in backfill body during mine subsidence using X-ray CT under uniaxial compressive conditions. In: Construction and Building Materials, v. 113 (Juni 2016).
Structurae kooperiert mit
