Kai Yang 
- (2025): Gas explosion overpressure loads in utility tunnels under different pipe support spacing. In: Tunnelling and Underground Space Technology, v. 155 (Januar 2025).
- (2024): Energy harvesting of a metamaterial beam with acoustic black holes. In: Smart Materials and Structures, v. 34, n. 1 (19 Dezember 2024).
- (2024): Effect of crumb rubber and polyethylene fiber on the strength and toughness of fly ash/slag-based geopolymer concrete. In: Construction and Building Materials, v. 455 (Dezember 2024).
- (2024): Effect of steam curing regime on the mechanical properties, drying shrinkage, and microstructure of mortar in high-altitude areas with low air pressure. In: Construction and Building Materials, v. 452 (November 2024).
- (2024): Frame jack-enhanced viscous damping approach for efficient seismic response mitigation of airport control towers. In: Structures, v. 66 (August 2024).
- (2024): Experimental and numerical study on extended endplate beam-column joints after high temperature to resist progressive collapse. In: Journal of Constructional Steel Research, v. 219 (August 2024).
- (2024): Long-term mechanical performance analysis of post-grouting prestressed resin bolt under anchorage creep. In: Tunnelling and Underground Space Technology, v. 149 (Juli 2024).
- (2016): Energy absorption of thin-walled tubes with pre-folded origami patterns: Numerical simulation and experimental verification. In: Thin-Walled Structures, v. 103 (Juni 2016).
- (2023): Insight into the flexural characteristics of rapid hardening ultra-high performance concrete (RH-UHPC) incorporating C-S-H seeds using acoustic emission technology. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2023): Loss of preload of unprotected bolted joints considering environmental effects: A comparative study. In: Journal of Constructional Steel Research, v. 211 (Dezember 2023).
- (2023): Effect of precuring time on the strength, microstructure, and energy consumption of direct electric curing concrete. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2023): Exploring decision-making mechanisms for the metro-based underground logistics system network expansion: An example of Beijing. In: Tunnelling and Underground Space Technology, v. 139 (September 2023).
- (2023): Investigation on effect of EVA on properties of desert sand-based permeable materials. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2023): Insights into the efficiency loss of naphthalene superplasticizer in alkali-activated slag pastes. In: Journal of Building Engineering, v. 68 (Juni 2023).
- (2023): Enhancement in strength and toughness of ultra-high performance concrete (UHPC) from micron- and nano-scale. In: Journal of Building Engineering, v. 69 (Juni 2023).
- (2022): Experimental investigation on flexural and compressive toughness of mortar and concrete with hybrid toughening materials. In: Structures, v. 43 (September 2022).
- (2022): Effect of laboratory oxidative aging on dynamic shear rheometer measures of asphalt binder fatigue cracking resistance. In: Construction and Building Materials, v. 337 (Juni 2022).
- (2021): Influence of carbonation on the bound chloride concentration in different cementitious systems. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Explosion Disaster Distribution Characteristics and Outlet Open-Close Effect of Turning Roadway. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2020): Effects of Different Additives and Ambient Conditions on Acceleration of Sludge Stabilization: Laboratory-Scale Simulated Landfill Study. In: Journal of Environmental Engineering (ASCE), v. 146, n. 4 (April 2020).
- (2020): Influence of Multiple Factors on the Explosion Characteristics of Flammable Gases in Municipal Sewage Pipelines. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Evaluation of interlayer stability in asphalt pavements based on shear fatigue property. In: Construction and Building Materials, v. 258 (Oktober 2020).
- (2019): Influence of axial loads on CO2 and Cl− transport in concrete phases: Paste, mortar and ITZ. In: Construction and Building Materials, v. 204 (April 2019).
- (2016): Isoparametric closure elements in boundary element method. In: Computers & Structures, v. 168 (Mai 2016).
- (2017): Effect of graphene oxide on the mechanical properties and the formation of layered double hydroxides (LDHs) in alkali-activated slag cement. In: Construction and Building Materials, v. 132 (Februar 2017).
- (2017): Investigation of effects of Portland cement fineness and alkali content on concrete plastic shrinkage cracking. In: Construction and Building Materials, v. 144 (Juli 2017).
- (2013): Investigation of asphalt concrete rutting mechanisms by X-ray computed tomography imaging and micromechanical finite element modeling. In: Materials and Structures, v. 46, n. 6 (Juni 2013).
- (2016): Estimates of concrete transport properties by a two pressure water test. In: Magazine of Concrete Research, v. 68, n. 10 (Mai 2016).
- (2014): Investigation of a bistable dual-stage vibration isolator under harmonic excitation. In: Smart Materials and Structures, v. 23, n. 4 (April 2014).
- (2018): First structural use of site-cast, alkali-activated slag concrete in China. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 171, n. 10 (Oktober 2018).
Structurae kooperiert mit
