Bin Yang 
- (2024): Impact of high-altitude environments on the motion and settling characteristics of wet-mix shotcrete dust in tunnels. In: Tunnelling and Underground Space Technology, v. 149 (Juli 2024).
- (2024): Exploring the influence and mechanisms of functionalized nanoscale wood fiber on the electromagnetic transmission performance of OPC paste. In: Construction and Building Materials, v. 420 (März 2024).
- (2023): Experimental Study on the Migration and Clogging of Fine Particles in Coarse-Grained Soil with Seepage. In: KSCE Journal of Civil Engineering, v. 28, n. 2 (Dezember 2023).
- (2023): Influence of spray parameters and thermal environments under convection heat transfer on the application of spray cooling technology in deep-buried high-temperature building tunnel. In: Energy and Buildings, v. 301 (Dezember 2023).
- (2024): Evolutionary mechanism and particle characterization analysis of dust produced by wet-mix shotcrete in tunnels. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Heat stress mitigation with ice cooling vests in PPE-clad medical workers: Effects of cooling area and gender differences. In: Building and Environment, v. 245 (November 2023).
- (2022): In situ monitoring of solid propellants under compressive load by MWCNT piezoresistive sensor. In: Journal of Mechanics of Materials and Structures, v. 17, n. 2 (10 Dezember 2022).
- (2023): Identification of wind loads on a 600 m high skyscraper by Kalman filter. In: Journal of Building Engineering, v. 63 (Januar 2023).
- (2022): High-impact resistant hybrid sandwich panel filled with shear thickening fluid. In: Composite Structures, v. 284 (März 2022).
- (2022): Effects of thermal and acoustic environments on workers' psychological and physiological stress in deep underground spaces. In: Building and Environment, v. 212 (März 2022).
- (2022): Infection probability under different air distribution patterns. In: Building and Environment, v. 207 (Januar 2022).
- (2022): Field measurements and numerical analysis on operating modes of a radiant floor heating aided by a warm air system in a large single-zone church. In: Energy and Buildings, v. 255 (Januar 2022).
- (2021): Embedding ensemble learning into simulation-based optimisation: a learning-based optimisation approach for construction planning. In: Engineering, Construction and Architectural Management, v. 30, n. 1 (August 2021).
- (2021): Intelligent decision method for main control parameters of tunnel boring machine based on multi-objective optimization of excavation efficiency and cost. In: Tunnelling and Underground Space Technology, v. 116 (Oktober 2021).
- (2021): Impact damage localization and mode identification of CFRPs panels using an electric resistance change method. In: Composite Structures, v. 276 (November 2021).
- (2020): Experimental Investigation of Anisotropic Wear Damage for Natural Joints under Direct Shearing Test. In: International Journal of Geomechanics, v. 20, n. 4 (April 2020).
- (2021): Experimental Investigation of Water-Sand Mixed Fluid Initiation and Migration in Filling Fracture Network during Water Inrush. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Influence of relayed fans and low level exhausts on performance of attachment ventilation under heating mode. In: Journal of Building Engineering, v. 36 (April 2021).
- (2020): Intumescent coating thickness effect on the post-heat mechanical properties of composites. In: Structures, v. 28 (Dezember 2020).
- (2013): Experimental investigation on the operation performance of a direct expansion ground source heat pump system for space heating. In: Energy and Buildings, v. 61 (Juni 2013).
- (2018): An experimental study on a novel radiant-convective heating system based on air source heat pump. In: Energy and Buildings, v. 158 (Januar 2018).
- (2018): GF/epoxy laminates embedded with wire nets: A way to improve the low-velocity impact resistance and energy absorption ability. In: Composite Structures, v. 202 (Oktober 2018).
- (2017): Experimental investigation of GF/epoxy laminates with different SMAs positions subjected to low-velocity impact. In: Composite Structures, v. 171 (Juli 2017).
- (2015): Experimental and numerical investigation of interply hybrid composites based on woven fabrics and PCBT resin subjected to low-velocity impact. In: Composite Structures, v. 132 (November 2015).
- (2020): Investigation of aggregate moisture content variation and its impact on pavement performance of WMA. In: Construction and Building Materials, v. 255 (September 2020).
- (2016): Indoor and outdoor particles in an air-conditioned building during and after the 2013 haze in Singapore. In: Building and Environment, v. 99 (April 2016).
- (2015): Effect of thermal transient on human thermal comfort in temporarily occupied space in winter – A case study in Tianjin. In: Building and Environment, v. 93 (November 2015).
- (2019): Experimental and Numerical Study on the Capability Behavior of a Thick-Walled Spatial Cast-Steel Joint under Complex Load Conditions. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2013): Frame structural sizing and topological optimization via a parallel implementation of a modified particle Swarm algorithm. In: KSCE Journal of Civil Engineering, v. 17, n. 6 (August 2013).
- (2016): Effects of Natural Ageing on Mechanical Properties of PVDF-Coated Fabrics. In: Structural Engineering International, v. 26, n. 4 (November 2016).
Structurae kooperiert mit
