Zhiguo Yan 
- (2024): Acoustic emission characteristics of damage evolution of multi-scale fiber reinforced rubberized concrete under uniaxial compression and tension after being subjected to high temperatures. In: Frontiers of Structural and Civil Engineering, v. 18, n. 8 (Juli 2024).
- (2024): Experimental study on the failure mechanism of the super-large-span flat cavern with the DIC technique. In: Tunnelling and Underground Space Technology, v. 152 (Oktober 2024).
- (2024): Effect of carbonated recycled concrete fines on early-age engineering properties, hydration and microstructure of cement paste under high substitution level and low water-to-binder ratio. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Coupled CFD-FEM methodology for structural fire safety of composite lining shield tunnel. In: Tunnelling and Underground Space Technology, v. 150 (August 2024).
- (2024): Investigation of loading intensity effect (LIE) on the failure mechanism of shield tunnel subjected to fire. In: Engineering Failure Analysis, v. 160 (Juni 2024).
- (2021): Application of the tunnel fire scenario dynamic reconstruction based on Intelligent Disaster Prevention Platform in Shanghai. In: IOP Conference Series: Earth and Environmental Science, v. 861, n. 7 (1 Oktober 2021).
- (2024): A condition fitting method of temperature field for tunnel structure based on test measurements. In: Tunnelling and Underground Space Technology, v. 144 (Februar 2024).
- (2023): Investigation on the fire spalling behavior of underground structures in varied situations by global–local phase field modeling. In: Tunnelling and Underground Space Technology, v. 142 (Dezember 2023).
- (2023): Crack detection in ultrahigh-performance concrete using robust principal component analysis and characteristic evaluation in the frequency domain. In: Structural Health Monitoring, v. 23, n. 2 (Juli 2023).
- (2023): Influence of multi-scale fiber on residual compressive properties of a novel rubberized concrete subjected to elevated temperatures. In: Journal of Building Engineering, v. 65 (April 2023).
- (2022): Experimental study on effect of ductile-iron panel stiffness on mechanical properties of segmental joints of shield tunnels. In: Underground Space, v. 7, n. 6 (Dezember 2022).
- (2023): Full-scale experimental study on fire characteristics induced by double fire sources in a two-lane road tunnel. In: Tunnelling and Underground Space Technology, v. 131 (Januar 2023).
- (2023): Full-scale experiment for segmental linings of deep-buried shield tunnels bearing high inner water pressure: Comparison of mechanical behaviors of continuous- and stagger-jointed structures. In: Underground Space, v. 8 (Februar 2023).
- (2022): Experimental study on mechanical behaviors of segmental joints with ductile-iron joint panels for deep-buried shield tunnels bearing high inner water pressure. In: Tunnelling and Underground Space Technology, v. 127 (September 2022).
- (2022): 3D numerical investigation on response of shield tunnel under combined effects of fire and structural loading. In: Tunnelling and Underground Space Technology, v. 128 (Oktober 2022).
- (2021): Characterizing the thermal properties of hybrid polypropylene-steel fiber reinforced concrete under heat exposure: Insights into fiber geometry and orientation distribution. In: Composite Structures, v. 275 (November 2021).
- (2019): Experimental investigation of pedestrian evacuation using an extra-long steep-slope evacuation path in a high altitude tunnel fire. In: Sustainable Cities and Society, v. 46 (April 2019).
- (2021): Effect of chloride attack on the bonded concrete system repaired by UHPC. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2021): Experimental investigation on the evacuation performance of pedestrians in a three-lane urban tunnel with natural ventilation in a fire scenario. In: Tunnelling and Underground Space Technology, v. 108 (Februar 2021).
- (2021): Experimental investigation and multi-level modeling of the effective thermal conductivity of hybrid micro-fiber reinforced cementitious composites at elevated temperatures. In: Composite Structures, v. 256 (Januar 2021).
- (2021): The effect of technical installations on evacuation performance in urban road tunnel fires. In: Tunnelling and Underground Space Technology, v. 107 (Januar 2021).
- (2015): A 3D analytical model for the probabilistic characteristics of self-healing model for concrete using spherical microcapsule. In: Computers and Concrete, v. 15, n. 1 (Januar 2015).
- (2019): Development of a novel bio-inspired cement-based composite material to improve the fire resistance of engineering structures. In: Construction and Building Materials, v. 225 (November 2019).
- (2016): Mechanical Properties of Manufactured-Sand Concrete after High Temperatures. In: The Open Civil Engineering Journal, v. 9, n. 1 (März 2016).
- (2016): Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method. In: Materials and Structures, v. 49, n. 12 (Dezember 2016).
- (2017): Experimental investigation of the nonlinear behavior of segmental joints in a water-conveyance tunnel. In: Tunnelling and Underground Space Technology, v. 68 (September 2017).
- (2016): Experimental study of tunnel segmental joints subjected to elevated temperature. In: Tunnelling and Underground Space Technology, v. 53 (März 2016).
- (2019): Experimental studies on the gas temperature and smoke back-layering length of fires in a shallow urban road tunnel with large cross-sectional vertical shafts. In: Tunnelling and Underground Space Technology, v. 83 (Januar 2019).
- (2015): Experimental and analytical study on longitudinal joint opening of concrete segmental lining. In: Tunnelling and Underground Space Technology, v. 46 (Februar 2015).
Structurae kooperiert mit
