Jin Xu 
- : From data silos to seamless integration and coordination: a data-asset centric approach to smart hospital facility management. In: Engineering, Construction and Architectural Management.
- (2025): Mechanical evaluation of multi-continuous interpenetrating phase composites based on Schwarz Primitive cellular structure. In: Composite Structures, v. 351 (Januar 2025).
- (2024): Effects of rice husk ash and fly ash on low-temperature PCM aggregate concrete: Relieving frost heave through sensible and latent heat. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Crack resistance, permeability, and microstructural analysis of recycled aggregate concrete with SAP. In: Construction and Building Materials, v. 430 (Juni 2024).
- (2024): Effects of tribological and material properties of wire rope on the motion synchronization of a precision flexible transmission device. In: Structures, v. 63 (Mai 2024).
- (2024): Evaluation of industrial byproduct iron ore tailings and carbon fiber cement-based materials under sulfate freeze-thaw cycles: Durability, piezoresistivity, and microscopic mechanism. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2024): Antibacterial and anticorrosion effects of Cetylpyridinium Chloride against Desulfovibrio desulfuricans biofilm and X80 steel corrosion. In: Construction and Building Materials, v. 414 (Februar 2024).
- (2023): Mechanical properties and soluble phosphorus solidification mechanism of a novel high amount phosphogypsum-based mortar. In: Construction and Building Materials, v. 394 (August 2023).
- (2024): Numerical simulation of operations of hydraulic excavators for polydisperse bulk materials and different configurated buckets. In: Automation in Construction, v. 157 (Januar 2024).
- (2023): Influence of Stone Powder Content from Manufactured Sand Concrete on Shrinkage, Cracking, Compressive Strength, and Penetration. In: Buildings, v. 13, n. 7 (28 Juni 2023).
- (2023): Nano-SiO2 Recycled Concrete Anti-Sulfate Performance and Damage Mechanism Research. In: Buildings, v. 13, n. 6 (23 Mai 2023).
- (2023): Enhanced near-field radiation of acoustic-actuated antennas using embedded magnetoelectric composites. In: Composite Structures, v. 314 (Juni 2023).
- (2023): Development of Engineered Cementitious Composites (ECCs) Incorporating Iron Ore Tailings as Eco-Friendly Aggregates. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): Deformation Analysis of Novel Sorbite Stainless Steel-Aluminum Alloy Attached Lifting Protection Platform. In: Buildings, v. 13, n. 6 (23 Mai 2023).
- (2023): Industrial byproduct Iron ore tailings as ecofriendly materials in the utilization of cementitious composites. In: Construction and Building Materials, v. 372 (April 2023).
- (2022): Effect of internal defect on the low-cycle bending fatigue behavior of a single-strand wire rope. In: Construction and Building Materials, v. 350 (Oktober 2022).
- (2022): Effect of iron ore tailings industrial by-product as eco-friendly aggregate on mechanical properties, pore structure, and sulfate attack and dry-wet cycles resistance of concrete. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Evaluation of molybdenum tailings as replacement for fine aggregate in concrete: Mechanical, corrosion resistance, and pore microstructural characteristics. In: Construction and Building Materials, v. 343 (August 2022).
- (2022): Influence of molybdenum tailings by-products as fine aggregates on mechanical properties and microstructure of concrete. In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): A comprehensive study on CFRP rapid portable bridge: Design, experimental investigation and finite element analysis. In: Composite Structures, v. 289 (Juni 2022).
- (2022): Behavior of fiber reinforced cementitious composites under the coupled attack of sulfate and dry/wet in a tidal environment. In: Construction and Building Materials, v. 314 (Januar 2022).
- (2022): Influence of iron ore tailings by-product on the mechanical and electrical properties of carbon fiber reinforced cement-based composites. In: Journal of Building Engineering, v. 45 (Januar 2022).
- (2021): The corrosion resistance of engineered cementitious composite (ECC) containing high-volume fly ash and low-volume bentonite against the combined action of sulfate attack and dry-wet cycles. In: Construction and Building Materials, v. 303 (Oktober 2021).
- (2017): Finite Layer Formulations for Land Subsidence due to Groundwater Withdrawal. In: International Journal of Geomechanics, v. 17, n. 11 (November 2017).
- (2017): Acceleration and Deceleration Calibration of Operating Speed Prediction Models for Two-Lane Mountain Highways. In: Journal of Transportation Engineering, Part A: Systems, v. 143, n. 7 (Juli 2017).
- (2016): Behaviour of steel-jacket retrofitted RC columns with preload effects. In: Thin-Walled Structures, v. 109 (Dezember 2016).
- (2013): An enriched 6-node MITC plate element for yield line analysis. In: Computers & Structures, v. 128 (November 2013).
- : Longitudinal acceleration of vehicles on complex mountain roads. In: Proceedings of the Institution of Civil Engineers - Transport.
- (2015): Laboratory investigation of andesite and limestone asphalt mixtures containing sodium chloride-based anti-icing filler. In: Construction and Building Materials, v. 98 (November 2015).
- (2016): Numerical relationship between creep deformation coefficients of prestressed concrete beams. In: Materials and Structures, v. 49, n. 4 (April 2016).
Structurae kooperiert mit
