Dong Xu 
- (2024): Phase evolution and microstructure changes induced by accelerated carbonation in natural hydraulic lime paste with GGBFS addition. In: Construction and Building Materials, v. 448 (Oktober 2024).
- (2024): Study on the fluid-solid transition mechanism of natural hydraulic lime pastes: Consider the water to binder ratio and polycarboxylate superplasticizer. In: Construction and Building Materials, v. 453 (November 2024).
-
(2024): Study on the composite compatibility and interfacial properties of excess sulfate phosphogypsum cementing system to OPC and C
- (2024): Optimized analysis and reinforcement design model for RC/SCC box-section bridges using developed advanced design framework. In: Engineering Structures, v. 317 (Oktober 2024).
- (2024): Shear strength of prestressed concrete beams with short shear span: Full‐scale experiments and evaluation of design methods. In: Structural Concrete, v. 25, n. 4 (August 2024).
- : Shear mechanism and strength calculation of steel shear keyed dry joints in precast segmental bridges. In: Structure and Infrastructure Engineering.
- (2023): Stress Indicators - A Complete Checking System of Stresses for Box Section. Vorgetragen bei: IABSE Symposium: Long Span Bridges, Istanbul, Turkey, 26-28 April 2023.
- (2023): Performance optimization and hydration mechanism of a clinker-free ultra-high performance concrete with solid waste based binder and steel slag aggregate. In: Journal of Building Engineering, v. 63 (Januar 2023).
- (2022): Optimization of the whole-waste binder containing molten iron desulfurization slag from Kambara Reactor for concrete production. In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): Shear behavior of steel keyed joints in precast concrete segmental bridges under direct shear loading. In: Structural Concrete, v. 23, n. 5 (Oktober 2022).
- (2022): A new quantitative acoustic emission model for damage characterization of composite laminates using original waveforms. In: Structural Health Monitoring, v. 21, n. 5 (März 2022).
- (2021): Numerical analyses on mechanical performance of flat buried approach slab and soil deformation. Vorgetragen bei: IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021.
- (2019): Research on Extending Span of Box Girder Bridge with Corrugated Steel Webs up to 300m. Vorgetragen bei: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2020): Study on the Mechanical Properties of Coal Weakenedby Acidic and Alkaline Solutions. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2019): Structural system identification by measurement error‐minimizing observability method. In: Structural Control and Health Monitoring, v. 26, n. 10 (13 September 2019).
- (2016): New Models for Structural Analysis of Composite Beams. Vorgetragen bei: IABSE Conference: Bridges and Structures Sustainability - Seeking Intelligent Solutions, Guangzhou, China, 8-11 May 2016.
- (2013): Structural Verification throughout the Tensioning Process of Cable-Stayed Bridges. Vorgetragen bei: IABSE Conference: Assessment, Upgrading and Refurbishment of Infrastructures, Rotterdam, The Netherlands, 6-8 May 2013.
- (2014): Simulation of the construction process of cable-stayed bridges from a direct approach. Vorgetragen bei: IABSE Symposium: Engineering for Progress, Nature and People, Madrid, Spain, 3-5 September 2014.
- (2017): Simulating composite bridges with corrugated steel webs using spatial grid model. Vorgetragen bei: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2017): Refined Stress Check of Special Concrete Box Girder Bridges at Serviceability Limit State. Vorgetragen bei: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2018): Static structural system identification for beam-like structures using compatibility conditions. In: Structural Control and Health Monitoring, v. 25, n. 1 (Januar 2018).
- (2013): Shear design of concrete beams reinforced with grid reinforcement. In: Magazine of Concrete Research, v. 65, n. 2 (Januar 2013).
- (2016): A specific rod model based efficient analysis and design of hanger installation for self-anchored suspension bridges with 3D curved cables. In: Engineering Structures, v. 110 (März 2016).
- (2016): Prestressing Optimization and Local Reinforcement Design for a Mixed Externally and Internally Prestressed Precast Segmental Bridge. In: Journal of Bridge Engineering (ASCE), v. 21, n. 7 (Juli 2016).
- (2010): The Space Frame Latice Model for Stress Analysis of Bridge. In: The Baltic Journal of Road and Bridge Engineering, v. 5, n. 2 (Juni 2010).
- (2017): Structural System Identification of Pedestrian Bridges by Observability Method. Vorgetragen bei: Footbridge 2017 Berlin - Tell A Story, 6-8.9.2017, Technische Universität Berlin (TU Berlin).
- (2016): A numerical approach for Structural System Identification by Observability Techniques. Vorgetragen bei: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2015): Quality assessment of material models for reinforced concrete flexural members. In: Structural Concrete, v. 16, n. 1 (März 2015).
- (2010): Shear Strength Investigation of Concrete Girders with Proposed Horizontal Shear Reinforcements in Webs. Vorgetragen bei: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
- (2008): Stress Limitation of External Prestressing Tendons in Serviceability Limit State. Vorgetragen bei: 17th IABSE Congress: Creating and Renewing Urban Structures – Tall Buildings, Bridges and Infrastructure, Chicago, USA, 17-19 September 2008.
Structurae kooperiert mit
