Wei Xie 
- (2024): Exploring mechanical properties and cracking behavior of AC-13 and OGFC-16 aggregate-segregated asphalt mixtures. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Cracking behavior of segmented-casting joint in steel-UHPC composite bridge deck system: Experiment and numerical simulation. In: Engineering Structures, v. 315 (September 2024).
- (2024): Investigation of mechanical properties, chemical composition and microstructure for composite cementitious materials containing waste powder recycled from asphalt mixing plants. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Experimental investigation on mechanical properties of steel-polypropylene hybrid fiber engineered cementitious composites. In: Construction and Building Materials, v. 426 (Mai 2024).
- (2023): Flexural Behavior of Corroded RC Beams Strengthened by Textile-Reinforced Concrete. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2024): Dynamic response analysis of piled embankment and train derailment evaluation subjected to seismic and high-speed train loads. In: Soil Dynamics and Earthquake Engineering, v. 177 (Februar 2024).
- (2024): Prediction of ground vibration under combined seismic and high-speed train loads considering earthquake intensity and site category. In: Soils and Foundations, v. 64, n. 1 (Februar 2024).
- (2023): Intelligent Modeling of Edge Components of Prefabricated Shear Wall Structures Based on BIM. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): Prediction of Shear Strength for Steel-Fiber High-Strength Concrete Corbels with the Softened Strut-and-Tie Model. In: Buildings, v. 13, n. 4 (24 März 2023).
- (2023): Application of BIM to Rebar Modeling of a Variable Section Column. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2022): Investigation of hot spot stress for welded tubular K-joints with stiffeners. In: Journal of Constructional Steel Research, v. 197 (Oktober 2022).
- (2010): Data Analysis Techniques for GPR Used for Assessing Railroad Ballast in High Radio-Frequency Environment. In: Journal of Transportation Engineering, v. 136, n. 4 (April 2010).
- (2020): Influence of the features of the unsaturated zone on the air injection method in a slope. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 173, n. 2 (April 2020).
- (2018): Consolidation behaviour with and without siphon drainage. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 171, n. 5 (Oktober 2018).
- (2021): Permanent deformation characteristic of asphalt mixture under coupling effect of moisture, overload and loading frequency. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2020): A mathematical model for predicting indoor PM2.5 concentration under different ventilation methods in residential buildings. In: Building Services Engineering Research and Technology, v. 41, n. 6 (Oktober 2020).
- (2020): Broadband radar absorbing performance of corrugated structure. In: Composite Structures, v. 253 (Dezember 2020).
- (2015): Blast-loaded behaviors of severely damaged buried arch repaired by anchored CFRP strips. In: Composite Structures, v. 122 (April 2015).
- (2014): Experimental behaviors of CFRP cloth strengthened buried arch structure subjected to subsurface localized explosion. In: Composite Structures, v. 116 (September 2014).
- (2020): A comparative study for fatigue characterization of asphalt binder using the linear amplitude sweep test. In: Materials and Structures, v. 53, n. 4 (26 Juni 2020).
- (2021): Experimental Model of Pockmarks from Gas Hydrate Decomposition by Aeration. In: Proceedings of the Institution of Civil Engineers - Maritime Engineering, v. 174, n. 1 (März 2021).
- (2018): Laboratory investigation on chemical and rheological properties of bio-asphalt binders incorporating waste cooking oil. In: Construction and Building Materials, v. 167 (April 2018).
- (2020): Prediction of seismic compression of saturated sand considering the ground motion characteristics and variable permeability. In: Soil Dynamics and Earthquake Engineering, v. 130 (März 2020).
- (2019): Preparation and thermal performance of binary fatty acid with diatomite as form-stable composite phase change material for cooling asphalt pavements. In: Construction and Building Materials, v. 226 (November 2019).
- (2019): A Cloud Model-based Knowledge Mapping Method for Historic Building Maintenance based on Building Information Modelling and Ontology. In: KSCE Journal of Civil Engineering, v. 23, n. 8 (Juli 2019).
- (2019): Performance of steel frames with new lightweight composite infill walls under curvature ground deformation. In: Journal of Building Engineering, v. 25 (September 2019).
- (2017): A framework to characterize the healing potential of asphalt binder using the linear amplitude sweep test. In: Construction and Building Materials, v. 154 (November 2017).
- (2017): Monitoring water seepage velocity in dikes using distributed optical fiber temperature sensors. In: Automation in Construction, v. 76 (April 2017).
- (2018): Experimental study on characteristics of flame spread over diesel and n-butanol pool fires in tunnel. In: Tunnelling and Underground Space Technology, v. 79 (September 2018).
- (2018): Refining the Calculation Method for Fatigue Failure Criterion of Asphalt Binder from Linear Amplitude Sweep Test. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 2 (Februar 2018).
Structurae kooperiert mit
