0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Chen, Haiming / Zhang, Yadong / Chen, Jie / Qin, Ziguang / Wu, Peng: Effect of fly ash and gypsum on drying shrinkage and mechanical properties of one‐part alkali‐activated slag mortar. In: Structural Concrete.

    https://doi.org/10.1002/suco.202400006

  2. Zhang, Tao / Wu, Peng / Jiang, Qina / Liu, Qing / Wang, Qiang / Qiu, Jun / Hu, Shugang / Lyu, Xianjun (2023): The competitive hydration of SO42-. In: Construction and Building Materials, v. 396 (September 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.132267

  3. Shi, Yifei / Wang, Xiangyu / Qian, Hui / Zhao, Hui / Wu, Peng / Kang, Liping / Li, Zongao / Li, Fei / Jing, Hongquan (2023): Development and preliminarily tests of superelastic Ni-Ti SMA ribbed bars for reinforced concrete applications. In: Construction and Building Materials, v. 402 (Oktober 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.133066

  4. Li, Xiaolong / Wu, Peng / Fang, Hai / Wang, Jie / Yu, Yunwei (2023): 3D viscoelastic solutions for bending creep of layered rectangular plates under time-varying load. In: Composite Structures, v. 325 (Dezember 2023).

    https://doi.org/10.1016/j.compstruct.2023.117590

  5. Wu, Peng / Feng, Ruoqiang (2023): CFD wind tunnel investigation for wind loads of steel television tower with grid structure. In: Structures, v. 58 (Dezember 2023).

    https://doi.org/10.1016/j.istruc.2023.105399

  6. Li, Chen / Li, Sheng-cai / Yue, Kong / Wu, Peng / Xiao, Zhong-ping / Zhang, Jun (2023): Analytical solutions and optimization design for bending behavior of cross-laminated timber beams considering orthotropy and interface slip. In: Case Studies in Construction Materials, v. 18 (Juli 2023).

    https://doi.org/10.1016/j.cscm.2023.e01948

  7. Chen, Gang / Huang, Yongqi / Wu, Peng / Feng, Ruoqiang / Zhou, Fangyuan (2023): Characteristics of Extreme Wind Pressure on the Open Prefabricated Spatial Grid Structure of Evergrande Stadium. In: Buildings, v. 13, n. 1 (13 Januar 2023).

    https://doi.org/10.3390/buildings13010025

  8. Chen, Weihong / Liu, Yi / Qian, Hui / Wu, Peng / Wu, Yingxiong / Liu, Fanghao (2023): Chloride Ion Corrosion Resistance of Innovative Self-Healing SMA Fiber-Reinforced Engineering Cementitious Composites under Dry-Wet Cycles for Ocean Structures. In: Buildings, v. 13, n. 2 (14 Februar 2023).

    https://doi.org/10.3390/buildings13020518

  9. Lyu, Haoyan / Chen, Yanlong / Pu, Hai / Ju, Feng / Zhang, Kai / Li, Qiang / Wu, Peng (2023): Dynamic properties and fragmentation mechanism of cemented tailings backfill with various particle size distributions of aggregates. In: Construction and Building Materials, v. 366 (Februar 2023).

    https://doi.org/10.1016/j.conbuildmat.2022.130084

  10. Zhu, Junxiang / Wu, Peng (2022): BIM/GIS data integration from the perspective of information flow. In: Automation in Construction, v. 136 (April 2022).

    https://doi.org/10.1016/j.autcon.2022.104166

  11. Mei, Zhongya / Xu, Maozeng / Wu, Peng / Luo, Siyu / Wang, Jun / Tan, Yi (2022): BIM-Based Framework for Formwork Planning Considering Potential Reuse. In: Journal of Management in Engineering (ASCE), v. 38, n. 2 (März 2022).

    https://doi.org/10.1061/(asce)me.1943-5479.0001004

  12. Shou, Wenchi / Wang, Jun / Wu, Peng (2021): The application of simulation in lean production research: a critical review and future directions. In: Engineering, Construction and Architectural Management, v. 28, n. 8 (Juli 2021).

    https://doi.org/10.1108/ecam-10-2020-0853

  13. Wang, Peng / Wu, Peng / Wang, Xiangyu / Chen, Xin / Zhou, Tao (2020): Developing optimal scaffolding erection through the integration of lean and work posture analysis. In: Engineering, Construction and Architectural Management, v. 27, n. 9 ( 2020).

    https://doi.org/10.1108/ecam-04-2019-0193

  14. Wu, Chengke / Wu, Peng / Wang, Jun / Jiang, Rui / Chen, Mengcheng / Wang, Xiangyu (2021): Developing a hybrid approach to extract constraints related information for constraint management. In: Automation in Construction, v. 124 (April 2021).

    https://doi.org/10.1016/j.autcon.2021.103563

  15. Wu, Peng / Chen, Yanlong / Chen, Liang / Mao, Xianbiao / Zhang, Wei (2020): Analytical Solution of a Circular Opening considering Nonuniform Pressure and Its Engineering Application. In: Advances in Civil Engineering, v. 2020 (Januar 2020).

    https://doi.org/10.1155/2020/8828917

  16. Guo, Yuzhu / Chen, Xudong / Chen, Bo / Wen, Rongkun / Wu, Peng (2021): Analysis of foamed concrete pore structure of railway roadbed based on X-ray computed tomography. In: Construction and Building Materials, v. 273 (März 2021).

    https://doi.org/10.1016/j.conbuildmat.2020.121773

  17. Wu, Peng / Pienaar, Josua / O'Brien, Darryl (2013): Developing a Lean Benchmarking Process to Monitor the Carbon Efficiency in Precast Concrete Factories—a Case Study in Singapore. In: Journal of Green Building, v. 8, n. 2 (April 2013).

    https://doi.org/10.3992/jgb.8.2.133

  18. Wu, Chengke / Wu, Peng / Wang, Jun / Jiang, Rui / Chen, Mengcheng / Wang, Xiangyu (2022): Critical review of data-driven decision-making in bridge operation and maintenance. In: Structure and Infrastructure Engineering, v. 18, n. 1 (Juni 2022).

    https://doi.org/10.1080/15732479.2020.1833946

  19. Wu, Peng / Zhou, Ding / Liu, Weiqing / Lu, Weidong / Fang, Hai (2017): 3-D exact solution of two-layer plate bonded by a viscoelastic interlayer with memory effect. In: Composite Structures, v. 164 (März 2017).

    https://doi.org/10.1016/j.compstruct.2016.12.073

  20. Wang, Peng / Wu, Peng / Chi, Hung-Lin / Li, Xiao (2020): Adopting lean thinking in virtual reality-based personalized operation training using value stream mapping. In: Automation in Construction, v. 119 (November 2020).

    https://doi.org/10.1016/j.autcon.2020.103355

  21. Wu, Peng / Mao, Chao / Wang, Jun / Song, Yongze / Wang, Xiangyu (2016): A decade review of the credits obtained by LEED v2.2 certified green building projects. In: Building and Environment, v. 102 (Juni 2016).

    https://doi.org/10.1016/j.buildenv.2016.03.026

  22. Chen, Qing / Xia, Bo / Jin, Zhigang / Wu, Peng / Hu, Yi (2016): Choosing Appropriate Contract Methods for Design-Build Projects. In: Journal of Management in Engineering (ASCE), v. 32, n. 1 (Januar 2016).

    https://doi.org/10.1061/(asce)me.1943-5479.0000393

  23. Wu, Peng / Zhao, Xianbo / Baller, Jessica Hedi / Wang, Xiangyu (2018): Developing a conceptual framework to improve the implementation of 3D printing technology in the construction industry. In: Architectural Science Review, v. 61, n. 3 (März 2018).

    https://doi.org/10.1080/00038628.2018.1450727

  24. Pienaar, Josua / Wu, Peng / Adams, Nadine (2016): Development of Virtual Teamwork Skills for Distance Students through Simulated Global Virtual Team Projects. In: Journal of Professional Issues in Engineering Education and Practice, v. 142, n. 1 (Januar 2016).

    https://doi.org/10.1061/(asce)ei.1943-5541.0000252

  25. Wu, Peng / Feng, Yingbin / Pienaar, Joshua / Zhong, Yun (2015): Educational Attainment and Job Requirements: Exploring the Gaps for Construction Graduates in Australia from an Industry Point of View. In: Journal of Professional Issues in Engineering Education and Practice, v. 141, n. 4 (Oktober 2015).

    https://doi.org/10.1061/(asce)ei.1943-5541.0000245

  26. Wu, Peng / Low, Sui Pheng / Liu, Jun Ying / Pienaar, Josua / Xia, Bo (2015): Critical Success Factors in Distance Learning Construction Programs at Central Queensland University: Students' Perspective. In: Journal of Professional Issues in Engineering Education and Practice, v. 141, n. 1 (Januar 2015).

    https://doi.org/10.1061/(asce)ei.1943-5541.0000217

  27. Wu, Peng / Pienaar, Josua / O'Brien, Darryl / Feng, Yingbin (2013): Delivering Construction Education Programs through the Distance Mode: Case Study in Australia. In: Journal of Professional Issues in Engineering Education and Practice, v. 139, n. 4 (Oktober 2013).

    https://doi.org/10.1061/(asce)ei.1943-5541.0000162

  28. Wang, Jun / Zhang, Xuedong / Shou, Wenchi / Wang, Xiangyu / Xu, Bo / Kim, Mi Jeong / Wu, Peng (2015): A BIM-based approach for automated tower crane layout planning. In: Automation in Construction, v. 59 (November 2015).

    https://doi.org/10.1016/j.autcon.2015.05.006

  29. Wu, Peng / Wang, Jun / Wang, Xiangyu (2016): A critical review of the use of 3-D printing in the construction industry. In: Automation in Construction, v. 68 (August 2016).

    https://doi.org/10.1016/j.autcon.2016.04.005

  30. Wang, Jun / Shou, Wenchi / Wang, Xiangyu / Wu, Peng (2015): Developing and evaluating a framework of total constraint management for improving workflow in liquefied natural gas construction. In: Construction Management and Economics, v. 34, n. 12 (August 2015).

    https://doi.org/10.1080/01446193.2016.1227460

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine