Meng Wu 
- (2024): Axial compressive bearing capacity of high-strength concrete-filled Q690 square steel tubular stub column. In: Construction and Building Materials, v. 413 (Januar 2024).
- (2025): Asphalt property prediction through high‐throughput molecular dynamics simulation. In: Computer-Aided Civil and Infrastructure Engineering, v. 40, n. 2 (Januar 2025).
- (2024): The influence of low temperature rise polymer on early cement hydration from the point of view of hydration kinetics and thermodynamics. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Correction: In situ visualization of water transport in cement mortar with an ultra-low w/b ratio under the coupling conditions of osmotic pressure, confining pressure, and temperature. In: Materials and Structures, v. 57, n. 7 (13 August 2024).
- (2024): Heating aluminum dross: Harmless process and utilization as cement admixture. In: Construction and Building Materials, v. 421 (März 2024).
- (2024): Experimental study on eco-friendly one-part alkali-activated slag-fly ash-lime composites under CO2 environment: Reaction mechanism and carbon capture capacity. In: Construction and Building Materials, v. 421 (März 2024).
- (2024): Comprehensive Evaluation of Soil Improvement Benefits of Biological Retention Facilities Based on AHP-CRITIC. In: Buildings, v. 14, n. 3 (21 Februar 2024).
- (2024): Characterization of a two-step laser paint stripping process on CFRP. In: Composite Structures, v. 339 (Juli 2024).
- (2023): Exploring the influence of cement and cement hydration products on strength and interfacial adhesion in emulsified cold recycled mixture: A molecular dynamics and experimental investigation. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Dynamic identification method for stiffness of duplex suspension clamp based on system modes. In: Structures, v. 57 (November 2023).
- (2023): Energy evolution characteristics of engineered cementitious composites (ECC) under tensile and compressive loading. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): In situ visualization of water transport in cement mortar with an ultra-low w/b ratio under the coupling conditions of osmotic pressure, confining pressure, and temperature. In: Materials and Structures, v. 56, n. 4 (13 April 2023).
- (2023): Analysis of rheological behavior and anti-aging properties of SBS modified asphalt incorporating UV absorbent and naphthenic oil (NPO). In: Construction and Building Materials, v. 377 (Mai 2023).
- (2023): Degradation of mortar fully buried in saline soil containing sodium sulfate or magnesium sulfate. In: Construction and Building Materials, v. 369 (März 2023).
- (2023): Influence of sodium chloride on the hydration of C3S blended paste. In: Construction and Building Materials, v. 369 (März 2023).
- (2023): In-Time Density Monitoring of In-Place Asphalt Layer Construction via Intelligent Compaction Technology. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 1 (Januar 2023).
- (2023): Characterizing the in-situ state of sandy soils for liquefaction analysis using resistivity piezocone penetration test. In: Soil Dynamics and Earthquake Engineering, v. 164 (Januar 2023).
- (2022): Effects of different mixing ratio parameters on mechanical properties of cost-effective green engineered cementitious composites (ECC). In: Construction and Building Materials, v. 328 (April 2022).
- (2021): Experimental research on ductility enhancement of ultra-high performance concrete incorporation with basalt fibre, polypropylene fibre and glass fibre. In: Construction and Building Materials, v. 279 (April 2021).
- (2021): Analyzing the filler and activity effect of fly ash and slag on the early hydration of blended cement based on calorimetric test. In: Construction and Building Materials, v. 276 (März 2021).
- (2022): Damping characteristics of the architectural coated fabric and its influence on the vibration response of membrane structures. In: Composite Structures, v. 285 (April 2022).
- (2021): The effects of different bedroom light environments in the evening on adolescents. In: Building and Environment, v. 206 (Dezember 2021).
- (2020): Experimental Study on Mechanical and Electrical Properties of PV-PVC Composites. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): A comparable study on the deterioration of limestone powder blended cement under sodium sulfate and magnesium sulfate attack at a low temperature. In: Construction and Building Materials, v. 243 (Mai 2020).
- (2020): Effects of fly ash on Portland limestone cement under sulfate attack at low temperature. In: Magazine of Concrete Research, v. 72, n. 3 (Februar 2020).
- (2018): Fresh properties of a novel 3D printing concrete ink. In: Construction and Building Materials, v. 174 (Juni 2018).
- (2018): Experimental study on the performance of lime-based low carbon cementitious materials. In: Construction and Building Materials, v. 168 (April 2018).
- (2019): Influence of sodium hydroxide on the performance and hydration of lime-based low carbon cementitious materials. In: Construction and Building Materials, v. 200 (März 2019).
- (2014): The experimental investigation of width of semi-carbonation zone in carbonated concrete. In: Construction and Building Materials, v. 65 (August 2014).
- (2018): Assessment of the Dynamic Behavior of Beam-to-Column Connections in Steel Pallet Racks under Cyclic Load: Numerical Investigation. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae kooperiert mit
