Chen Wu
- (2024): Mechanical performance and failure mode judgment criteria of grouted sleeve connectors considering large deformation and grouting compactness. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Experimental study on bending fatigue performance of ambient-cured ultra-high-performance concrete thin plate with embedded steel wire mesh. In: Construction and Building Materials, v. 449 (Oktober 2024).
- (2024): Experimental and numerical studies on axial compression performance of low-porosity non-dispersive underwater concrete columns. In: Construction and Building Materials, v. 451 (November 2024).
- (2025): Axial compressive performance of unsymmetrical steel-reinforced concrete stub columns. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 178, n. 1 (1 Januar 2025).
- (2024): Damage identification of non-dispersible underwater concrete columns under compression using impedance technique and stress-wave propagation. In: Journal of Civil Structural Health Monitoring, v. 14, n. 7 (Mai 2024).
- (2024): Finite element simulation and falling ball impact model for cement concrete pavement considering void under slab. In: Construction and Building Materials, v. 427 (Mai 2024).
- : Confinement mechanism and constitutive model of SRC columns with cross-shaped steel sections. In: Magazine of Concrete Research.
- : Flexural strengthening of reinforced concrete beams with different levels of damage using ambient-cured ultra-high performance concrete. In: Structure and Infrastructure Engineering.
- (2023): Towards automated 3D evaluation of water leakage on a tunnel face via improved GAN and self-attention DL model. In: Tunnelling and Underground Space Technology, v. 142 (Dezember 2023).
- (2023): Effect of superabsorbent polymers and expansive agent on the properties and microstructures of self-stressing high performance concrete. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Seismic fragility analysis of suspended cable trays in civil buildings. In: Engineering Structures, v. 290 (September 2023).
- (2023): Hysteretic model for main to sub beam joints of cable tray. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Monotonic and cyclic compressive behavior of ultra-high performance concrete with coarse aggregate: Experimental investigation and constitutive model. In: Journal of Building Engineering, v. 68 (Juni 2023).
- (2022): A statistical influence line identification method using Bayesian regularization and a polynomial interpolating function. In: Structural Control and Health Monitoring, v. 29, n. 11 (September 2022).
- (2022): Expansive behavior of high-strength self-stressing and self-compacting concrete: Experimental study and analytical model. In: Construction and Building Materials, v. 353 (Oktober 2022).
- (2022): Dynamic responses and failure pattern of suspended cable tray system through shaking table test. Vorgetragen bei: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
- (2022): Experimental study on seismic behavior of precast concrete circular section column with grouted sleeve. In: Journal of Building Engineering, v. 46 (April 2022).
- (2021): Experimental study on seismic performance of suspended ceiling components. Vorgetragen bei: IABSE Congress: Resilient technologies for sustainable infrastructure, Christchurch, New Zealand, 3-5 February 2021.
- (2018): Evaluation the compressive strength of the cement paste blended with supplementary cementitious materials using a piezoelectric-based sensor. In: Construction and Building Materials, v. 171 (Mai 2018).
Structurae kooperiert mit
