Muhammad Wasim 
- (2023): Ultra-high performance concrete versus ultra-high performance geopolymer concrete: Mechanical performance, microstructure, and ecological assessment. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Influence of aggregate source and size on the shear behavior of high strength reinforced concrete deep beams. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): An optimized energy efficient design of a light gauge steel building. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2022): Efficient design of a prefabricated steel structure integrating design for manufacture and assembly concepts. In: Australian Journal of Structural Engineering, v. 23, n. 4 (Juni 2022).
- (2022): Future directions for the application of zero carbon concrete in civil engineering – A review. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Mechanical performance and feasibility analysis of green concrete prepared with local natural zeolite and waste PET plastic fibers as cement replacements. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): An Experimental Study on Enhancing Progressive Collapse Resistance Using a Steel Fiber–Reinforced Concrete Frame. In: Journal of Structural Engineering (ASCE), v. 148, n. 7 (Juli 2022).
- (2022): Structural analyses for 3d prefabricated module with an innovative ultra-thin steel base at various stages of modularisation. In: Journal of Building Engineering, v. 46 (April 2022).
- (2021): A state-of-the-art review on the durability of geopolymer concrete for sustainable structures and infrastructure. In: Construction and Building Materials, v. 291 (Juli 2021).
- (2022): An experimental study of compressive toughness of Steel–Polypropylene hybrid Fibre-Reinforced concrete. In: Structures, v. 37 (März 2022).
- (2022): Structural performance of prefabricated glass fibre concrete floor panel versus compressed fibre cement floor panel for an optimised volumetric module- A case study. In: Journal of Building Engineering, v. 48 (Mai 2022).
- (2021): Durability performance of reinforced waste-based geopolymer foam concrete under exposure to various corrosive environments. In: Case Studies in Construction Materials, v. 15 (Dezember 2021).
- (2021): Design for manufacture and assembly: A case study for a prefabricated bathroom wet wall panel. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2020): Correlation Model for the Corrosion Rates of Buried Cast Iron Pipes. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 12 (Dezember 2020).
- (2020): An approach for sustainable, cost-effective and optimised material design for the prefabricated non-structural components of residential buildings. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Effect of Soil’s Acidity and Saturation on Degradation of Fracture Toughness of Buried Cast Iron. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 7 (Juli 2020).
- (2020): Investigation of long-term corrosion resistance of reinforced concrete structures constructed with various types of concretes in marine and various climate environments. In: Construction and Building Materials, v. 237 (März 2020).
- (2019): Quantitative Study of Coupled Effect of Soil Acidity and Saturation on Corrosion and Microstructure of Buried Cast Iron. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 9 (September 2019).
- (2015): Passive film formation and corrosion initiation in lightweight concrete structures as compared to self compacting and ordinary concrete structures at elevated temperature in chloride rich marine environment. In: Construction and Building Materials, v. 78 (März 2015).
- (2011): Corrosion in RC construction under chloride and hot weather. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 164, n. 4 (August 2011).
- (2013): Three-dimensional computer-aided finite element method retrofitting modeling and non-destructive testing techniques for the assessment of actual existing high-rise fire-damaged reinforced concrete building. In: The Structural Design of Tall and Special Buildings, v. 22, n. 12 (25 August 2013).
- (2018): Preferred corrosion and its effect on delamination of steel. In: Construction and Building Materials, v. 193 (Dezember 2018).
- (2019): Mechanical and Microstructural Evaluation of Corrosion and Hydrogen-Induced Degradation of Steel. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 1 (Januar 2019).
Structurae kooperiert mit
