Shuhong Wang 
- (2024): The Response of Angle Steel Skeleton-Reinforced Concrete Beams to Low-Cycle and Static Loads. In: KSCE Journal of Civil Engineering, v. 28, n. 9 (23 Juli 2024).
- (2024): Slurry Support Mechanism for Shield Tunneling Considering Slurry Infiltration and Cutter-Disk Cutting Effect. In: International Journal of Geomechanics, v. 24, n. 10 (Oktober 2024).
- (2024): Enhancing concrete bond strength with silicate-based curing agents: A focus on surface damage repair. In: Journal of Building Engineering, v. 93 (September 2024).
- (2024): Effect of impact treatment methods with different energy and frequency on roughening and tensile bond of concrete-concrete interfaces. In: Construction and Building Materials, v. 422 (April 2024).
- (2024): Application of Lightweight Steel-Plate–Reinforced Ribbed UHPC Deck Panel in a Long-Span Suspension Bridge. In: Journal of Bridge Engineering (ASCE), v. 29, n. 2 (Februar 2024).
- (2023): Location and mechanism analysis of curtain water inrush channels based on MTI-derived parameters-a case study. In: Tunnelling and Underground Space Technology, v. 141 (November 2023).
- (2023): Multi-index dominant grouping of rock mass discontinuities based on the combined weighting method: A case study for the Huayang tunnel. In: Tunnelling and Underground Space Technology, v. 139 (September 2023).
- (2023): Role of micro fibres in tailoring the specific heat capacity of cementitious composites at elevated temperatures: Experimental characterisation and micromechanical modelling. In: Construction and Building Materials, v. 369 (März 2023).
- (2024): Soil slope analysis to develop useful correlations in saturated and unsaturated conditions. In: Proceedings of the Institution of Civil Engineers - Forensic Engineering, v. 177, n. 1 (Januar 2024).
- (2022): Develop correlations between soil parameters in unsaturated condition – Jandola landslide as case study. In: Proceedings of the Institution of Civil Engineers - Forensic Engineering, v. 175, n. 3 (August 2022).
- (2021): Reconstruction of fracture geometry in material medium by elastic wave. In: Construction and Building Materials, v. 287 (Juni 2021).
- (2022): Numerical Investigation of Antiperforation Performance of Reinforced Concrete Target. In: Journal of Performance of Constructed Facilities (ASCE), v. 36, n. 3 (Juni 2022).
- (2021): Hydraulic and Mechanical Coupling Analysis of Rough Fracture Network under Normal Stress and Shear Stress. In: KSCE Journal of Civil Engineering, v. 26, n. 2 (Dezember 2021).
- (2021): An analytical model for the triaxial compressive Stress-strain relationships of Cemented Pasted Backfill (CPB) with different curing time. In: Construction and Building Materials, v. 313 (Dezember 2021).
- (2021): Mechanical behaviors of "easy cracking zones" of precast rectangular utility tunnels. In: Case Studies in Construction Materials, v. 15 (Dezember 2021).
- (2023): A simple calculation method for predicting factor of safety and seepage due to the variation in dam width and other parameters. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 176, n. 2 (April 2023).
- (2021): Detection of source locations in RC columns using machine learning with acoustic emission data. In: Engineering Structures, v. 246 (November 2021).
- (2021): A path for evaluating the mechanical response of rock masses based on deep mining-induced microseismic data: A case study. In: Tunnelling and Underground Space Technology, v. 115 (September 2021).
- (2021): Detection of damage locations and damage steps in pile foundations using acoustic emissions with deep learning technology. In: Frontiers of Structural and Civil Engineering, v. 15, n. 2 (April 2021).
- (2021): Automatic Identification and Location of Tunnel Lining Cracks. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Experimental and numerical investigation on in-plane impact behaviour of chiral auxetic structure. In: Composite Structures, v. 267 (Juli 2021).
- (2021): Quantifying the containment efficiency of underground water-sealed oil storage caverns: Method and case study. In: Tunnelling and Underground Space Technology, v. 110 (April 2021).
- (2006): Analysis of the shear failure process of masonry by means of a meso-scopic mechanical modeling approach. In: Structural Engineering and Mechanics, v. 24, n. 2 (September 2006).
- (2021): Loading rate effect on the uniaxial compressive strength (UCS) behavior of cemented paste backfill (CPB). In: Construction and Building Materials, v. 271 (Februar 2021).
- (2021): Bi-directional seismic behavior of steel beam-column connections with outer annular stiffener. In: Engineering Structures, v. 227 (Januar 2021).
- (2020): Bending mechanics model and value of transverse joints in precast prestressed utility tunnel. In: Journal of Asian Architecture and Building Engineering, v. 19, n. 3 (April 2020).
- (2019): Effect of infill walls on mechanisms of steel frames against progressive collapse. In: Journal of Constructional Steel Research, v. 162 (November 2019).
- (2019): Effect of partial infill walls on collapse behavior of reinforced concrete frames. In: Engineering Structures, v. 197 (Oktober 2019).
- (2019): Influence of masonry infill walls on fire-induced collapse mechanisms of steel frames. In: Journal of Constructional Steel Research, v. 155 (April 2019).
- (2013): Spatial characterization of joint planes and stability analysis of tunnel blocks. In: Tunnelling and Underground Space Technology, v. 38 (September 2013).
Structurae kooperiert mit
