Shugang Wang
- (2022): Analysis of the Air-Reversed Brayton Heat Pump with Different Layouts of Turbochargers for Space Heating. In: Buildings, v. 12, n. 7 (5 Juli 2022).
- (2022): Mechanical properties of PVC concrete and mortar modified with silane coupling agents. In: Construction and Building Materials, v. 348 (September 2022).
- (2022): Scale-up of open zeolite bed reactors for sorption energy storage: Theory and experiment. In: Energy and Buildings, v. 264 (Juni 2022).
- (2022): A passive pivoted window for stabilizing the natural ventilation rate. In: Energy and Buildings, v. 267 (Juli 2022).
- (2021): Performance evaluation for a coupled push–pull ventilation and air curtain system to restrict pollutant dispersion in a factory building. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Basic properties and mechanism of high activity phosphate-based slurry for dynamic water blocking-A feasibility research. In: Construction and Building Materials, v. 275 (März 2021).
- (2020): A review of heat and mass transfer mechanisms of dehumidifiers and regenerators for liquid desiccant cooling systems. In: Science and Technology for the Built Environment, v. 26, n. 4 (März 2020).
- (2020): Impact of chilled ceiling on indoor air distribution in a room with mixing ventilation. In: Science and Technology for the Built Environment, v. 26, n. 3 (Februar 2020).
- (2018): Measured moisture accumulation in aircraft walls during simulated commercial flights. In: Science and Technology for the Built Environment, v. 24, n. 8 (September 2018).
- (2018): Measuring moisture content in porous insulation materials based on transient temperatures over a period of 100 seconds. In: Science and Technology for the Built Environment, v. 24, n. 6 (April 2018).
- (2017): Numerical and analytical investigations of heat transfer for a finned tube heat exchanger with ice slurry as cooling medium. In: Science and Technology for the Built Environment, v. 23, n. 3 (Februar 2017).
- (2014): Inverse determination of wall boundary convective heat fluxes in indoor environments based on CFD. In: Energy and Buildings, v. 73 (April 2014).
- (2014): Prediction of airflow rate through a ventilated wall module. In: Energy and Buildings, v. 82 (Oktober 2014).
- (2017): Assessment of single-sided natural ventilation driven by buoyancy forces through variable window configurations. In: Energy and Buildings, v. 139 (März 2017).
- (2017): Gaseous pollutant transmission through windows between vertical floors in a multistory building with natural ventilation. In: Energy and Buildings, v. 153 (Oktober 2017).
- (2018): Numerical investigation of single-sided natural ventilation driven by buoyancy and wind through variable window configurations. In: Energy and Buildings, v. 168 (Juni 2018).
- (2020): Numerical investigation of gaseous pollutant cross-transmission for single-sided natural ventilation driven by buoyancy and wind. In: Building and Environment, v. 172 (April 2020).
- (2017): Experimental identification of key parameters contributing to moisture accumulation in an aircraft section. In: Building and Environment, v. 126 (Dezember 2017).
- (2017): Inverse identification of multiple temporal sources releasing the same tracer gaseous pollutant. In: Building and Environment, v. 118 (Juni 2017).
- (2016): Prompt design of the air-supply opening size for a commercial airplane based on the proper orthogonal decomposition of flows. In: Building and Environment, v. 96 (Februar 2016).
- (2015): Optimal specification of target temperature points for inverse design of an indoor thermal environment. In: Building and Environment, v. 92 (Oktober 2015).
- (2015): Measuring moisture content in a porous insulation material using a hot wire. In: Building and Environment, v. 84 (Januar 2015).
- (2013): An adjustment to the standard temperature wall function for CFD modeling of indoor convective heat transfer. In: Building and Environment, v. 68 (Oktober 2013).
- (2012): Insulation of commercial aircraft with an air stream barrier along fuselage. In: Building and Environment, v. 57 (November 2012).
- (2012): A personal air distribution system with air terminals embedded in chair armrests on commercial airplanes. In: Building and Environment, v. 47 (Januar 2012).
- (2011): Quantify impacted scope of human expired air under different head postures and varying exhalation rates. In: Building and Environment, v. 46, n. 10 (Oktober 2011).
- (2010): Flow impact of an air conditioner to portable air cleaning. In: Building and Environment, v. 45, n. 9 (September 2010).
- (2020): A preliminary investigation of the properties of potassium magnesium phosphate cement-based grouts mixed with fly ash, water glass and bentonite. In: Construction and Building Materials, v. 237 (März 2020).
- (2016): Reinforcement of rock mass with cross-flaws using rock bolt. In: Tunnelling and Underground Space Technology, v. 51 (Januar 2016).
- (2013): Quasi-static laboratory testing of a new rock bolt for energy-absorbing applications. In: Tunnelling and Underground Space Technology, v. 38 (September 2013).
Structurae kooperiert mit
