Libin Wang 
- (2024): Nondestructive evaluation of carbon fiber reinforced polymer (CFRP)-timber interfacial debonding using active microwave thermography (AMT). In: Construction and Building Materials, v. 422 (April 2024).
- (2023): Probabilistic seismic performance assessment of low-damage self-recovering prefabricated concrete frame subjected to near-field pulse-like earthquakes. In: Structures, v. 55 (September 2023).
- (2023): Investigation of the effect of pre-tightening forces on bolted connection for FRP-steel joints. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): A Comparative Study on the Stability Performance of the Suspen-Dome, Conventional Cable Dome, and Ridge-Beam Cable Dome. In: Buildings, v. 13, n. 8 (2 August 2023).
- (2023): Accurate Modeling and Wave Propagation Analysis of Cracked Slender Structural Members by the Spectral Element Method. In: Structural Control and Health Monitoring, v. 2023 (Februar 2023).
- (2023): Out-of-plane bending behavior of cross-laminated timber members enhanced with fiber-reinforced polymers. In: Journal of Building Engineering, v. 66 (Mai 2023).
- (2023): Prediction of the Shear Resistance of Headed Studs Embedded in Precast Steel–Concrete Structures Based on an Interpretable Machine Learning Method. In: Buildings, v. 13, n. 2 (14 Februar 2023).
- (2022): Probabilistic Analysis on Aerostatic Displacement-dependent Wind Loads on a Stream-lined Box Girder. In: KSCE Journal of Civil Engineering, v. 27, n. 1 (November 2022).
- (2022): Axial Compression Behavior of FRP Confined Laminated Timber Columns under Cyclic Loadings. In: Buildings, v. 12, n. 11 (27 Oktober 2022).
- (2023): Prediction of FRP-concrete interfacial bond strength based on machine learning. In: Engineering Structures, v. 274 (Januar 2023).
- (2022): An experimental and modeling study on apparent bending moduli of cross-laminated bamboo and timber (CLBT) in orthogonal strength directions. In: Case Studies in Construction Materials, v. 16 (Juni 2022).
- (2022): Nondestructive evaluation of carbon fiber reinforced polymer (CFRP)-steel interfacial debonding using eddy current thermography. In: Composite Structures, v. 284 (März 2022).
- (2022): Off-axis compressive behavior of cross-laminated bamboo and timber wall elements. In: Structures, v. 35 (Januar 2022).
- (2022): Bending and shear performance of cross-laminated timber and glued-laminated timber beams: A comparative investigation. In: Journal of Building Engineering, v. 45 (Januar 2022).
- (2021): A general model for predicting the off-axis performance of fiber reinforced composite materials. In: Structures, v. 34 (Dezember 2021).
- (2021): Experimental Study on Earthquake Resilience of Low-Damage Self-Centering Precast Concrete Frame Connections. In: Journal of Earthquake Engineering, v. 26, n. 13 (Oktober 2021).
- (2021): Experimental study on post-fire properties of steel wires of bridge suspender. In: Structures, v. 33 (Oktober 2021).
- (2021): Design optimization of low‐damage self‐centering precast concrete frame connections to improve energy dissipation capacity. In: The Structural Design of Tall and Special Buildings, v. 30, n. 8 (10 Juni 2021).
- (2021): Long-term temperature field of steel-box girder of a long-span bridge: Measurement and simulation. In: Engineering Structures, v. 236 (Juni 2021).
- (2021): Parametric Study on Self-centering Precast Concrete Frames with Hysteretic Dampers. In: Periodica Polytechnica Civil Engineering, v. 65, n. 3 ( 2021).
- (2021): Influence of mild steel damper design parameters on energy dissipation performance of low-damage self-centering precast concrete frame connections. In: Soil Dynamics and Earthquake Engineering, v. 144 (Mai 2021).
- (2021): Characterizing engineering performance of bamboo-wood composite cross-laminated timber made from bamboo mat-curtain panel and hem-fir lumber. In: Composite Structures, v. 266 (Juni 2021).
- (2020): Perforation of needle-punched carbon-carbon composites during high-temperature and high-velocity ballistic impacts. In: Composite Structures, v. 245 (August 2020).
- (2020): Analytical model of concrete-filled FRP-steel composite tube columns under cyclic axial compression. In: Soil Dynamics and Earthquake Engineering, v. 139 (Dezember 2020).
- (2020): Reliability-Based Maintenance Strategy for Gusset Plate Connections in Steel Bridges Based on Life-Cost Optimization. In: Journal of Performance of Constructed Facilities (ASCE), v. 34, n. 5 (Oktober 2020).
- (2020): Experimental and numerical study of low-damage self-centering precast concrete frame connections with replaceable dampers. In: Engineering Structures, v. 220 (Oktober 2020).
- (2020): Behaviors of GFRP-steel bonded joints under cyclic loading after hygrothermal aging. In: Construction and Building Materials, v. 242 (Mai 2020).
- (2019): Seismic response of self-centering precast concrete frames with hysteretic dampers. In: The Structural Design of Tall and Special Buildings, v. 28, n. 8 (10 Juni 2019).
- (2019): Experimental investigations of concrete-filled steel tubular columns confined with high-strength steel wire. In: Advances in Structural Engineering, v. 22, n. 13 (Mai 2019).
- (2019): A comparative study of compression behaviors of cross-laminated timber and glued-laminated timber columns. In: Construction and Building Materials, v. 222 (Oktober 2019).
Structurae kooperiert mit
