Kai Wang 
- (2025): Static and dynamic analysis of high-order defective sandwich beams by a novel weak-form quadrature element method. In: Engineering Structures, v. 325 (Februar 2025).
- (2024): Study on Mechanical Properties of Road Cement-Stabilized Macadam Base Material Prepared with Construction Waste Recycled Aggregate. In: Buildings, v. 14, n. 9 (25 August 2024).
- : Tensile analysis of loop joints with different overlap lengths. In: Journal of Asian Architecture and Building Engineering.
- (2024): Statistical accuracy of finite element method in predicting horizontal displacement of monopiles for offshore wind turbines. In: Marine Structures, v. 97 (September 2024).
- (2024): Resource utilisation of hazardous aluminium dross and coal gangue for fibre-reinforced cemented foam backfill. In: Journal of Building Engineering, v. 91 (August 2024).
- (2022): Study on Critical Safety Distance Between the Shield Tunnel and Front Fault Fracture Zone in Urban Metro. In: Geotechnical and Geological Engineering, v. 40, n. 11 (4 Juli 2022).
- (2024): Transformer based day-ahead cooling load forecasting of hub airport air-conditioning systems with thermal energy storage. In: Energy and Buildings, v. 308 (April 2024).
- (2024): Self-calibrating technique for 3D displacement measurement using monocular vision and planar marker. In: Automation in Construction, v. 159 (März 2024).
- (2023): Surface treatment of rail to enhance rolling contact fatigue and wear resistance: Combined spot laminar plasma quenching and tempering method. In: Construction and Building Materials, v. 401 (Oktober 2023).
- (2023): Seismic performance of partially encased concrete composite columns with corrugated web. In: Journal of Building Engineering, v. 77 (Oktober 2023).
- (2024): Study on the influence mechanism of calcium carbonate particles on mechanical properties of microcrack cement. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Shake table tests of a full-scale two-story plate-type modular composite building with semi-rigid corner connections. In: Engineering Structures, v. 289 (August 2023).
- (2023): Residual Flexural Capacity of Composite Beams with Corroded Studs after Fatigue. In: Journal of Bridge Engineering (ASCE), v. 28, n. 6 (Juni 2023).
- (2023): Research on the seismic behaviour of hollow prefabricated square column with high-strength reinforcement using UHPC grouting materials. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2023): Three-dimensional quasi-zero-stiffness metamaterial for low-frequency and wide complete band gap. In: Composite Structures, v. 307 (März 2023).
- (2023): Seismic performance of prefabricated square hollow section piers strengthened by jacketing using UHPC and high-strength steel. In: Structures, v. 47 (Januar 2023).
- (2022): Strength and deformation performances of silt-based foamed concrete under triaxial shear loading. In: Journal of Building Engineering, v. 60 (November 2022).
- (2022): Seismic performance of prefabricated steel tube-confined concrete circular pier. In: Structures, v. 43 (September 2022).
- (2022): Thermal characteristics of the multilayered structural MOF-EG/OC composite phase change material in thermal energy storage. In: Energy and Buildings, v. 260 (April 2022).
- (2022): Review on the deterioration and approaches to enhance the durability of concrete in the freeze–thaw environment. In: Construction and Building Materials, v. 321 (Februar 2022).
- (2021): Silica fume-reinforced alkali-activated uncalcined Pisha Sandstone-based geopolymer cement. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2021): Sustainable utilization of bauxite residue (Red Mud) as a road material in pavements: A critical review. In: Construction and Building Materials, v. 270 (Februar 2021).
- (2018): Techno-economic analysis on frosting and defrosting operations of an air source heat pump unit applied in a typical cold city. In: Energy and Buildings, v. 162 (März 2018).
- (2020): Stability Analysis of Surrounding Rock in Circular Tunnels Based on Critical Support Pressure. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2001): Wind pressure provisions for gable roofs of intermediate roof slope. In: Wind & Structures, v. 4, n. 2 (April 2001).
- (2018): Tests on residual ultimate bearing capacity of square CFST columns after impact. In: Journal of Constructional Steel Research, v. 147 (August 2018).
- (2017): Residual axial bearing capacity of square steel tubes after lateral impact. In: Journal of Constructional Steel Research, v. 137 (Oktober 2017).
- (2015): Unloading Phenomena Characteristics in Brittle Rock Masses by A Large-Scale Excavation in Dam Foundation. In: The Open Civil Engineering Journal, v. 8, n. 1 (Juni 2015).
- (2015): Uniaxial tensile mechanical properties and model parameters determination of ethylene tetrafluoroethylene (ETFE) foils. In: Construction and Building Materials, v. 75 (Januar 2015).
- (2017): Using DFP Algorithm for Nodal Demand Estimation of Water Distribution Networks. In: KSCE Journal of Civil Engineering, v. 22, n. 8 (November 2017).
Structurae kooperiert mit
