Jun Wang 
- : Damage analyze of prestressed small box girder bridges under explosive loading of vehicle. In: Proceedings of the Institution of Civil Engineers - Transport.
- (2024): Correlation between electricity generation of piezoelectric ceramics and cyclic behavior of UGMs under traffic loading. In: Soil Dynamics and Earthquake Engineering, v. 182 (Juli 2024).
- (2023): Chloride transportation and electrochemical behavior of concrete containing corrosion-inhibiting admixture and its inhibition mechanism under compound salt and drying-wetting cycles. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2023): Carbon nanofibers and PVA fiber hybrid concrete: Abrasion and impact resistance. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2024): Cellular Automata for Corrosion in Carbon Fiber-Reinforced Polymer-Strengthened Bridge Columns. In: ACI Structural Journal, v. 121, n. 1 ( 2024).
- (2023): Comparative analysis of heating characteristics of convective-radiant systems using various terminal air source heat pumps. In: Energy and Buildings, v. 301 (Dezember 2023).
- (2023): Coupled dynamic and piezoelectric response of RPEHs embedded in road under traffic load via multiscale finite element models. In: Smart Materials and Structures, v. 32, n. 10 (30 August 2023).
- (2023): Carbon nanofibers and polyvinyl-alcohol fiber hybrid-reinforced high-performance concrete: Mechanical property, chloride penetration resistance, and material characterization. In: Construction and Building Materials, v. 399 (Oktober 2023).
- (2023): Data-driven assessment on the corporate credit scoring mechanism for Chinese construction supervision companies. In: Construction Management and Economics, v. 41, n. 11-12 (Juni 2023).
- (2023): A coupled heat and mass transfer model of green roof with water storage layer. In: Building and Environment, v. 235 (Mai 2023).
- (2022): Comprehensive study on fatigue degradation of road piezoelectric energy harvesters under thermal-mechanical coupling effect. In: Smart Materials and Structures, v. 32, n. 2 (Dezember 2022).
- (2023): Comprehensive evaluation method for structural behavior of concrete dams in cold regions. In: Engineering Structures, v. 278 (März 2023).
- (2022): Comprehensive performance study of aluminum ash and calcium carbide slag for brick making under ultra-high pressure. In: Construction and Building Materials, v. 359 (Dezember 2022).
- (2022): Bridge Flutter Characteristics Under a Non-uniform Attack Angle Wind Field. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 47, n. 2 (Juli 2022).
- (2021): Creep Fracture Characteristics of Fractured Rock Mass Strengthened with Toughened Epoxy Resin. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Cyclic Behavior of Sand under Traffic Loading with ‘Inclined’ Consolidation. In: KSCE Journal of Civil Engineering, v. 25, n. 5 (12 März 2021).
- (2020): Comparison of daylight simulation methods for reflected sunlight from curtain walls. In: Building Simulation, v. 14, n. 3 (Juli 2020).
- (2022): Critical review of data-driven decision-making in bridge operation and maintenance. In: Structure and Infrastructure Engineering, v. 18, n. 1 (Juni 2022).
- (2016): Concentration characteristics of ozone and product for indoor occupant surface chemical reaction under displacement ventilation. In: Energy and Buildings, v. 130 (Oktober 2016).
- (2020): Characterization of the acceptable daylight quality in typical residential buildings in Hong Kong. In: Building and Environment, v. 182 (September 2020).
- (2018): Comparative characteristics of relative pollution exposure caused by human surface chemical reaction under mixing and displacement ventilation. In: Building and Environment, v. 132 (März 2018).
- (2016): Comparative Analysis on the Adoption and Use of BIM in Road Infrastructure Projects. In: Journal of Management in Engineering (ASCE), v. 32, n. 6 (November 2016).
- (2018): Cyclic behavior of saturated soft clay under stress path with bidirectional shear stresses. In: Soil Dynamics and Earthquake Engineering, v. 104 (Januar 2018).
- (2019): Combination model for conventional pushover analysis considering higher mode vibration effects. In: The Structural Design of Tall and Special Buildings, v. 28, n. 12 (25 August 2019).
- (2019): Calculation of chloride ion diffusion in glass and polypropylene fiber-reinforced concrete. In: Construction and Building Materials, v. 215 (August 2019).
- (2017): Concrete-filled steel tubes with reinforcing bars or angles under axial tension. In: Journal of Constructional Steel Research, v. 133 (Juni 2017).
- (2016): A critical review of the use of 3-D printing in the construction industry. In: Automation in Construction, v. 68 (August 2016).
- (2016): Building information modeling-based integration of MEP layout designs and constructability. In: Automation in Construction, v. 61 (Januar 2016).
- (2015): Challenges and strategies involved in designing and constructing a 6 km immersed tunnel: A case study of the Hong Kong–Zhuhai–Macao Bridge. In: Tunnelling and Underground Space Technology, v. 50 (August 2015).
- (2007): Collapse process analysis in construction of concrete-filled steel tube arch bridge. Vorgetragen bei: IABSE Symposium: Improving Infrastructure Worldwide, Weimar, Germany, 19-21 September 2007.
Structurae kooperiert mit
