Hao Wang 
- (2024): Optimization of geopolymer pervious concrete design using multi-phase discrete element modeling. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Optimizing the pore structure and permeability of calcined clay limestone cement through shell powder. In: Journal of Building Engineering, v. 91 (August 2024).
- (2016): Performance of cold-formed-steel-framed shear walls sprayed with lightweight mortar under reversed cyclic loading. In: Thin-Walled Structures, v. 98 (Januar 2016).
- (2023): Optimization and Validation of Piezoelectric Cantilever Designs for Energy Harvesting from Bridge Vibrations. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2678, n. 2 (30 Juni 2023).
- (2023): Optimizing raw material composition and alkali content in low silicon-aluminum tailings-based geopolymers. In: Construction and Building Materials, v. 404 (November 2023).
- (2024): Numerical study on the seismic performance of the damage-control beam-to-column joint with artificial steel hinge. In: Journal of Constructional Steel Research, v. 212 (Januar 2024).
- (2024): Performance enhancement of damaged RC structures with viscoelastic dampers: Damage assessment and optimal placement. In: Soil Dynamics and Earthquake Engineering, v. 177 (Februar 2024).
- (2023): Physics guided wavelet convolutional neural network for wind-induced vibration modeling with application to structural dynamic reliability analysis. In: Engineering Structures, v. 297 (Dezember 2023).
- (2023): Performance improvement and demand-oriented optimum design of the tuned negative stiffness inerter damper for base-isolated structures. In: Journal of Building Engineering, v. 63 (Januar 2023).
- (2022): Optimal Design of Damped Structure with Inerter System Based on Modified Harmony Search Algorithm. In: Advances in Civil Engineering, v. 2022 (Januar 2022).
- (2022): Numerical modeling and experimental validation of Sliding-LRBs considering hysteretic strength degradation. In: Engineering Structures, v. 262 (Juli 2022).
- (2021): Phase changes under efflorescence in alkali activated materials with mixed activators. In: Construction and Building Materials, v. 283 (Mai 2021).
- (2021): On fracture locus of corroded steel plates with nominal fracture strain and corrosion morphology. In: Journal of Constructional Steel Research, v. 184 (September 2021).
- (2021): Optimum design of viscous inerter damper targeting multi-mode vibration mitigation of stay cables. In: Engineering Structures, v. 226 (Januar 2021).
- (2020): Parametric analysis on flutter performance of a long-span quadruple-tower suspension bridge. In: Structures, v. 28 (Dezember 2020).
- (2020): Parametric analysis and simplified approach for steel-framed subassemblies with reverse channel connection under falling-debris impact. In: Engineering Structures, v. 225 (Dezember 2020).
- (2020): Parametric Study of Superelastic-Sliding LRB System for Seismic Response Control of Continuous Bridges. In: Journal of Bridge Engineering (ASCE), v. 25, n. 9 (September 2020).
- (2020): Performance of Bridges Isolated with Sliding-Lead Rubber Bearings Subjected to Near-Fault Earthquakes. In: International Journal of Structural Stability and Dynamics, v. 20, n. 2 (Januar 2020).
- (2014): Parameter sensitivity study on flutter stability of a long-span triple-tower suspension bridge. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 128 (Mai 2014).
- (2019): Performance evaluation of bridges isolated with SMA-based friction pendulum system at low temperatures. In: Soil Dynamics and Earthquake Engineering, v. 125 (Oktober 2019).
- (2019): Parametric Study of SMA-based Friction Pendulum System for Response Control of Bridges under Near-Fault Ground Motions. In: Journal of Earthquake Engineering, v. 25, n. 8 (April 2019).
- (2018): Numerical study of rigid steel beam-column joints under impact loading. In: Journal of Constructional Steel Research, v. 147 (August 2018).
- (2019): Phase behavior and hot storage characteristics of asphalt modified with various polyethylene: Experimental and numerical characterizations. In: Construction and Building Materials, v. 203 (April 2019).
- (2019): Phase field simulation and microscopic observation of phase separation and thermal stability of polymer modified asphalt. In: Construction and Building Materials, v. 204 (April 2019).
- (2016): Operations of electric taxis to serve advance reservations by trip chaining: Sensitivity analysis on network size, customer demand and number of charging stations. In: International Journal of Transportation Science and Technology, v. 5, n. 2 (Oktober 2016).
- (2017): On the mechanism of inrush hazards when Denghuozhai Tunnel passing through granite contact zone. In: Tunnelling and Underground Space Technology, v. 68 (September 2017).
- (2018): Numerical Simulation of an Indirect Tensile Test for Asphalt Mixtures Using Discrete Element Method Software. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 5 (Mai 2018).
- (2018): Performance Comparison between Different Sourced Bioasphalts and Asphalt Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 5 (Mai 2018).
- (2018): Parametric study on buffeting performance of a long-span triple-tower suspension bridge. In: Structure and Infrastructure Engineering, v. 14, n. 3 (August 2018).
- (2018): Outburst mechanism of tunnelling through coal seams and the safety strategy by using "strong-weak" coupling circle-layers. In: Tunnelling and Underground Space Technology, v. 74 (April 2018).
Structurae kooperiert mit
