Danièle Waldmann 
- (2024): Potential and limits using the DAD method for condition assessment of bridge structures. In: Engineering Structures, v. 308 (Juni 2024).
- (2024): Experimental and numerical study on shear behavior of a demountable CLT-concrete composite shear connection. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Phase Field Modeling at Mesoscale of Recycled Aggregate Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 6 (Juni 2024).
- (2024): Experimental and statistical investigations of the material properties of FRP reinforcement in compression. In: Construction and Building Materials, v. 414 (Februar 2024).
- (2023): Experimental and Numerical Investigation of a Novel Demountable Timber–Concrete Composite Floor. In: Buildings, v. 13, n. 7 (28 Juni 2023).
- (2023): Fine demolition wastes as Supplementary cementitious materials for CO2 reduced cement production. In: Construction and Building Materials, v. 392 (August 2023).
- (2022): Experimental investigations on the interfacial bond strength of the adhered mortar paste to the new mortar paste in a recycled concrete matrix. In: Construction and Building Materials, v. 347 (September 2022).
- (2021): Analysis of the geometrical imperfections of a dry-stacked masonry block based on Miscanthus. In: Construction and Building Materials, v. 310 (Dezember 2021).
- (2021): Machine learning in mix design of Miscanthus lightweight concrete. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Binary blended cement pastes and concrete using gravel wash mud (GWM) powders. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2020): Optimisation of the mechanical properties of Miscanthus lightweight concrete. In: Construction and Building Materials, v. 258 (Oktober 2020).
- (2014): Field study on the energy consumption of school buildings in Luxembourg. In: Energy and Buildings, v. 68 (Januar 2014).
- (2016): Field tests of centralized and decentralized ventilation units in residential buildings – Specific fan power, heat recovery efficiency, shortcuts and volume flow unbalances. In: Energy and Buildings, v. 116 (März 2016).
- (2020): Application of the DAD method for damage localisation on an existing bridge structure using close-range UAV photogrammetry. In: Engineering Structures, v. 218 (September 2020).
- (2020): Monotonic axial compressive behaviour and confinement mechanism of square CFRP-steel tube confined concrete. In: Engineering Structures, v. 217 (August 2020).
- (2018): Impact of the height imperfections of masonry blocks on the load bearing capacity of dry-stack masonry walls. In: Construction and Building Materials, v. 165 (März 2018).
- (2020): Overcome of bed-joint imperfections and improvement of actual contact in dry-stacked masonry. In: Construction and Building Materials, v. 233 (Februar 2020).
- (2020): Experimental and analytical analysis of the load-bearing capacity Pu of improved dry-stacked masonry. In: Journal of Building Engineering, v. 27 (Januar 2020).
- (2019): Behavior of Circular Fiber-Reinforced Polymer–Steel-Confined Concrete Columns Subjected to Reversed Cyclic Loads: Experimental Studies and Finite-Element Analysis. In: Journal of Structural Engineering (ASCE), v. 145, n. 9 (September 2019).
- (2019): Experimental and numerical analysis of early age behavior in non-reinforced concrete. In: Construction and Building Materials, v. 210 (Juni 2019).
- (2019): Curvature based DAD-method for damage localisation under consideration of measurement noise minimisation. In: Engineering Structures, v. 181 (Februar 2019).
- (2017): Influence of the sheet profile design on the composite action of slabs made of lightweight woodchip concrete. In: Construction and Building Materials, v. 148 (September 2017).
- (2012): Damage assessment of concrete structures through dynamic testing methods. Part 1 – Laboratory tests. In: Engineering Structures, v. 34 (Januar 2012).
- (2012): Damage assessment of concrete structures through dynamic testing methods. Part 2: Bridge tests. In: Engineering Structures, v. 34 (Januar 2012).
- (2018): The Deformation Area Difference (DAD) method for condition assessment of reinforced structures. In: Engineering Structures, v. 155 (Januar 2018).
- (2018): A new thickness-based accelerated aging test methodology for resin materials: Theory and preliminary experimental study. In: Construction and Building Materials, v. 186 (Oktober 2018).
- (2015): Messtechnische Ermittlung der U-Werte von Außenwänden im Vergleich mit Typologiewerten für den Gebäudebestand. In: Bauphysik, v. 37, n. 5 ( 2015).
- (2011): Feldstudie zum Energieverbrauch von Bürogebäuden. In: Bauphysik, v. 33, n. 3 (Juni 2011).
- (2010): Entwicklung von hybriden Wärmedämmsteinen aus LAC. In: Mauerwerk, v. 14, n. 1 (Februar 2010).
- (2010): Dynamische Zustandsbewertung einer Verbundbrücke: Beobachtung äußerer und nichtlinearer Einflüsse auf die modalen Eigenschaften. In: Beton- und Stahlbetonbau, v. 105, n. 8 (August 2010).
Structurae kooperiert mit
