Els Verstrynge 
- : Bayesian updating of relationships between crack width and corrosion level in reinforced concrete based on a large set of experimental data. In: Structural Concrete.
- : Corrosion level estimation in reinforced concrete beams by acoustic emission sensing and selective crack measurements. In: Structural Concrete.
- (2024): Dynamic stiffness parameter assessment of cracked reinforced concrete beams: A numerical and experimental study. In: Engineering Structures, v. 318 (November 2024).
- (2024): Bond properties of deformed steel bars coated with quartz sand modified enamel in concrete under both monotonic and reversed cyclic loading. In: Engineering Structures, v. 316 (Oktober 2024).
- (2024): Fracture mode analysis of cementitious mortars by simultaneous application of 4D-XCT and acoustic emission technique. In: Construction and Building Materials, v. 419 (März 2024).
- (2023): Fatigue fracture quantification in brittle cementitious materials using acoustic emission testing and digital image correlation. In: Construction and Building Materials, v. 400 (Oktober 2023).
- (2023): Experimental study on acoustic emission sensing and vibration monitoring of corroding reinforced concrete beams. In: Engineering Structures, v. 293 (Oktober 2023).
- (2023): Challenges in assessing corrosion damage in reinforced concrete beams by vibration-based monitoring: literature analysis and experimental study. In: Structural Health Monitoring, v. 22, n. 6 (April 2023).
- (2019): Assessing the bond behaviour of corroded smooth and ribbed rebars with acoustic emission monitoring. In: Cement and Concrete Research, v. 120 (Juni 2019).
- (2022): Steel corrosion damage monitoring in reinforced concrete structures with the acoustic emission technique: A review. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): Experimental and numerical investigation into corrosion-induced mortar/concrete cracking with distributed optical fiber sensors. In: Journal of Civil Structural Health Monitoring, v. 12, n. 4 (23 Juli 2022).
- (2022): Effect of pre-existing longitudinal and transverse corrosion cracks on the flexural behaviour of corroded RC beams. In: Construction and Building Materials, v. 319 (Februar 2022).
- (2022): Acoustic emission-based damage analysis of steel fibre reinforced concrete in progressive cyclic uniaxial tension tests. In: Construction and Building Materials, v. 321 (Februar 2022).
- (2021): An experimental assessment of corrosion damage and bending capacity reduction of singly reinforced concrete beams subjected to accelerated corrosion. In: Construction and Building Materials, v. 286 (Juni 2021).
- (2022): Probabilistic structural analysis of a real-life corroding concrete bridge girder incorporating stochastic material and damage variables in a finite element approach. In: Engineering Structures, v. 254 (März 2022).
- (2021): A review on fiber optic sensors for rebar corrosion monitoring in RC structures. In: Construction and Building Materials, v. 313 (Dezember 2021).
- (2021): Sectional analysis of the cyclic behavior of steel fiber reinforced concrete. In: Structural Concrete, v. 22, n. 5 (September 2021).
- (2021): Acoustic emission source characterisation of chloride-induced corrosion damage in reinforced concrete. In: Structural Health Monitoring, v. 21, n. 3 (August 2021).
- (2020): Country-scale InSAR monitoring for settlement and uplift damage calculation in architectural heritage structures. In: Structural Health Monitoring, v. 20, n. 5 (Dezember 2020).
- (2021): A review on acoustic emission monitoring for damage detection in masonry structures. In: Construction and Building Materials, v. 268 (Januar 2021).
- (2015): The Stratified Significance of a Historic Façade as a Basis for a more Durable Conservation Approach. In: Restoration of Buildings and Monuments, v. 21, n. 4-6 (Dezember 2015).
- (2018): Crack monitoring in historical masonry with distributed strain and acoustic emission sensing techniques. In: Construction and Building Materials, v. 162 (Februar 2018).
- (2020): Numerical Modeling of a Church Nave Wall Subjected to Differential Settlements: Soil-Structure Interaction, Time-Dependence and Sensitivity Analysis. In: International Journal of Architectural Heritage, v. 14, n. 8 ( 2020).
- (2013): A joint fatigue–creep deterioration model for masonry with acoustic emission based damage assessment. In: Construction and Building Materials, v. 43 (Juni 2013).
- (2019): Localisation and characterisation of corrosion damage in reinforced concrete by means of acoustic emission and X-ray computed tomography. In: Construction and Building Materials, v. 197 (Februar 2019).
- (2019): Quantification of progressive structural integrity loss in masonry with Acoustic Emission-based damage classification. In: Construction and Building Materials, v. 194 (Januar 2019).
- (2018): Creep failure of two historical masonry towers: analysis from material to structure. In: International Journal of Masonry Research and Innovation, v. 3, n. 1 ( 2018).
- (2014): Characterization of debonding in FRP-strengthened masonry using the acoustic emission technique. In: Engineering Structures, v. 66 (Mai 2014).
- (2018): Crack growth in masonry: Numerical analysis and sensitivity study for discrete and smeared crack modelling. In: Engineering Structures, v. 165 (Juni 2018).
- (2016): Structural Analysis of Historical Constructions. Anamnesis, diagnosis, therapy, controls. CRC Press, Boca Raton (USA), ISBN 9781138029514.
Structurae kooperiert mit
