-
Wu, Weijian / Veljković, Milan / Kolstein, Henk / Maljaars, Johan / Pijpers, Richard (2024): Fatigue behaviour of toe and root stiffener cracks in stiffener-to-deck plate weld of orthotropic bridge decks. In: Engineering Structures, v. 305 (April 2024).
https://doi.org/10.1016/j.engstruct.2024.117740
-
Wu, Weijian / Veljković, Milan / Kolstein, Henk / Pijpers, Richard / Maljaars, Johan (2024): Fatigue behaviour of root crack in stiffener-to-deck plate weld at crossbeam of orthotropic bridge decks. In: Engineering Structures, v. 306 (Mai 2024).
https://doi.org/10.1016/j.engstruct.2024.117710
-
Maljaars, Johan / Pijpers, Richard / Veljković, Milan / van Dooren, Frank (2023): Fatigue verification of orthotropic bridge decks with the hot‐spot method – Background to TS 1993‐1‐901. In: ce/papers, v. 6, n. 3-4 (September 2023).
https://doi.org/10.1002/cepa.2664
-
Liu, Bingfeng / Xin, Haohui / Liu, Jielin / Veljković, Milan (2023): Fatigue performance evaluation of stiffener‐to‐deck plate weld in orthotropic steel decks based on generative adversarial network. In: ce/papers, v. 6, n. 3-4 (September 2023).
https://doi.org/10.1002/cepa.2730
-
Cheng, Lu / Yang, Fei / Seidel, Marc / Veljković, Milan (2023): FE-assisted investigation for mechanical behaviour of connections in offshore wind turbine towers. In: Engineering Structures, v. 285 (Juni 2023).
https://doi.org/10.1016/j.engstruct.2023.116039
-
Yan, Rui / Xin, Haohui / Mela, Kristo / El Bamby, Hagar / Veljković, Milan (2023): Fracture simulation of welded RHS X-joints using GTN damage model. In: Advances in Structural Engineering, v. 26, n. 12 (Juni 2023).
https://doi.org/10.1177/13694332221137175
-
Yan, Rui / Mela, Kristo / El Bamby, Hagar / Veljković, Milan (2023): Experimental investigation on the tensile behaviour of welded RHS high strength steel X-joints. In: Engineering Structures, v. 276 (Februar 2023).
https://doi.org/10.1016/j.engstruct.2022.115357
-
Shi, Zhanchong / Su, Qingtian / Kavoura, Florentia / Veljković, Milan (2023): Fatigue behavior evaluation of full-scale OSD-UHPC composite bridge deck system. In: Engineering Structures, v. 275 (Januar 2023).
https://doi.org/10.1016/j.engstruct.2022.115179
-
Maarleveld, Arvid / Malschaert, David / Veljković, Milan (2022): Experimental investigations of welding induced temperature gradients and distortions in a segment of an OSD. Vorgetragen bei: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022.
https://doi.org/10.2749/prague.2022.0800
-
Xin, Haohui / Li, Jie / Veljković, Milan / Liu, Yuqing / Sun, Qing (2022): Evaluating the strength of grade 10.9 bolts subject to multiaxial loading using the micromechanical failure index: MCEPS. In: Steel Construction, v. 15, n. 3 (15 Juli 2022).
https://doi.org/10.1002/stco.202100029
-
Shankar Gupta, Ravi / Xin, Haohui / Veljković, Milan (2019): Fatigue crack propagation simulation of orthotropic bridge deck based on extended finite element method. In: Procedia Structural Integrity, v. 22 ( 2019).
https://doi.org/10.1016/j.prostr.2020.01.036
-
Xin, Haohui / Tarus, Iulia / Cheng, Lu / Veljković, Milan / Persem, Nicolas / Lorich, Laurent (2021): Experiments and numerical simulation of wire and arc additive manufactured steel materials. In: Structures, v. 34 (Dezember 2021).
https://doi.org/10.1016/j.istruc.2021.08.055
-
Pedrosa, Bruno / Rebelo, Carlos / Correia, José / Veljković, Milan / da Silva, Luís Simões (2021): Fatigue life of preloaded injection bolts in a bridge strengthening scenario – sensitivity analysis of fatigue life estimators. In: ce/papers, v. 4, n. 2-4 (September 2021).
https://doi.org/10.1002/cepa.1271
-
Fric, Nenad / Mišković, Zoran / Budjevac, Dragan / Veljković, Milan (2021): Experimental study of slip‐resistant connections under cyclic load. In: ce/papers, v. 4, n. 2-4 (September 2021).
https://doi.org/10.1002/cepa.1277
-
Yang, Fei / Veljković, Milan / Cheng, Lu (2021): Fracture simulation of fully and partially threaded bolts under tension. In: ce/papers, v. 4, n. 2-4 (September 2021).
https://doi.org/10.1002/cepa.1275
-
Tarus, Iulia / Xin, Haohui / Veljković, Milan / Persem, Nicolas / Lorich, Laurent (2021): Evaluation of material properties of 3D printed carbon steel for material modelling. In: ce/papers, v. 4, n. 2-4 (September 2021).
https://doi.org/10.1002/cepa.1469
-
Yang, Fei / Liu, Yuqing / Xin, Haohui / Veljković, Milan (2021): Fracture simulation of a demountable steel-concrete bolted connector in push-out tests. In: Engineering Structures, v. 239 (Juli 2021).
https://doi.org/10.1016/j.engstruct.2021.112305
-
Pedrosa, Bruno / Correia, José / Rebelo, Carlos / Veljković, Milan / Gervásio, Helena (2021): Fatigue experimental characterization of preloaded injection bolts in a metallic bridge strengthening scenario. In: Engineering Structures, v. 234 (Mai 2021).
https://doi.org/10.1016/j.engstruct.2021.112005
-
Wu, Weijian / Kolstein, Henk / Veljković, Milan (2018): Fatigue Crack Propagation Analysis of Rib-to-deck Welded Joint in OSDs using Linear Elastic Fracture Mechanics. Vorgetragen bei: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
https://doi.org/10.2749/nantes.2018.s7-9
-
Yang, Fei / Veljković, Milan / Liu, Yuqing (2021): Fracture simulation of partially threaded bolts under tensile loading. In: Engineering Structures, v. 226 (Januar 2021).
https://doi.org/10.1016/j.engstruct.2020.111373
-
Liu, Xiaoling / Wang, Yuanqing / Ban, Huiyong / Liu, Ming / Veljković, Milan / Bijlaard, Frans S. K. (2020): Flexural strength and rotation capacity of welded I-section steel beams with longitudinally profiled flanges. In: Journal of Constructional Steel Research, v. 173 (Oktober 2020).
https://doi.org/10.1016/j.jcsr.2020.106255
-
Byström, Alexandra / Cheng, Xudong / Wickström, Ulf / Veljković, Milan (2012): Full-scale experimental and numerical studies on compartment fire under low ambient temperature. In: Building and Environment, v. 51 (Mai 2012).
https://doi.org/10.1016/j.buildenv.2011.11.010
-
Wu, Weijian / Kolstein, Henk / Veljković, Milan (2019): Fatigue resistance of rib-to-deck welded joint in OSDs, analyzed by fracture mechanics. In: Journal of Constructional Steel Research, v. 163 (Dezember 2019).
https://doi.org/10.1016/j.jcsr.2019.105700
-
Heistermann, Tim / Koltsakis, Efthymios / Veljković, Milan / Lopes, Fernanda / Santiago, Aldina / da Silva, Luís Simões (2015): Initial stiffness evaluation of reverse channel connections in tension and compression. In: Journal of Constructional Steel Research, v. 114 (November 2015).
https://doi.org/10.1016/j.jcsr.2015.07.006
-
Bijlaard, Frans / Veljković, Milan / Shi, Gang / Qiang, Xuhong (2018): Implementation of high-strength, high-performance steel structures. In: Steel Construction, v. 11, n. 4 (November 2018).
https://doi.org/10.1002/stco.201870403
-
Lopes, Fernanda / Santiago, Aldina / da Silva, Luís Simões / Heistermann, Tim / Veljković, Milan / Guilherme da Silva, José (2013): Experimental behaviour of the reverse channel joint component at elevated and ambient temperatures. In: International Journal of Steel Structures, v. 13, n. 3 ( 2013).
https://doi.org/10.1007/s13296-013-3006-1
-
Pavlović, Marko / Veljković, Milan (2017): FE validation of push-out tests. In: Steel Construction, v. 10, n. 2 (Mai 2017).
https://doi.org/10.1002/stco.201710017
-
Matos, Rui P. / Pinto, Paulo L. / Rebelo, Carlos S. / Gervásio, Helena S. / Veljković, Milan (2016): Improved design of tubular wind tower foundations using steel micropiles. In: Structure and Infrastructure Engineering, v. 12, n. 9 (September 2016).
https://doi.org/10.1080/15732479.2015.1076853
-
Pavlović, Marko / Heistermann, Christine / Veljković, Milan / Pak, Daniel / Feldmann, Markus / Rebelo, Carlos / da Silva, Luís Simões (2015): Friction connection vs. ring flange connection in steel towers for wind converters. In: Engineering Structures, v. 98 (September 2015).
https://doi.org/10.1016/j.engstruct.2015.04.026
-
Pimenta de Andrade, Pedro António / Lagerqvist, Ove / Veljković, Milan / Simões, Rui / Lundholm, John (2016): Innovative System for the Construction and Management of Student Residences – Frameup System. Vorgetragen bei: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
https://doi.org/10.2749/stockholm.2016.1359