-
Craeye, B. / De Schutter, G. / Desmet, B. / Vantomme, J. / Heirman, G. / Vandewalle, L. / Cizer, Ö. / Aggoun, S. / Kadri, E. H. (2010): Effect of mineral filler type on autogenous shrinkage of self-compacting concrete. In: Cement and Concrete Research, v. 40, n. 6 (Juni 2010).
https://doi.org/10.1016/j.cemconres.2010.01.014
-
Heirman, G. / Hendrickx, R. / Vandewalle, L. / van Gemert, D. / Feys, D. / De Schutter, G. / Desmet, B. / Vantomme, J. (2009): Integration approach of the Couette inverse problem of powder type self-compacting concrete in a wide-gap concentric cylinder rheometer. In: Cement and Concrete Research, v. 39, n. 3 (März 2009).
https://doi.org/10.1016/j.cemconres.2008.12.006
-
Balázs, G. L. / Bamonte, P. / Belletti, B. / Bentz, E. / Cheng, M.-Y. / Collins, M. P. / Damoni, C. / Di Prisco, M. / Dinh, H. H. / Felicetti, R. / Fernández Ruiz, M. / Gambarova, P. G. / Giuriani, E. / Hackbarth, B. / Hendriks, M. / Kim, K. S. / Kuchma, D. / Muttoni, A. / Nagle, T. / Parra Montesinos, G. J. / Rots, J. / Sun, S. / Susetyo, J. / Vandewalle, L. / Vecchio, F. J. / Walraven, J. / Wight, J. K. / Minelli, F. / Plizzari, G. (2010): Shear and punching shear in RC and FRC elements. fédération internationale du béton (fib), Lausanne (Schweiz), ISBN 9782883940970.
https://doi.org/10.35789/fib.BULL.0057
-
Vandewalle, L. (1996): Toughness of Steel Fibre High Strength Concrete. Vorgetragen bei: 15th IABSE Congress, Copenhagen, Denmark, 16-20 June 1996.
-
Steensels, R. / Vandoren, B. / Vandewalle, L. / Degee, H. (2019): Evaluation of end-zone detailing of pre-tensioned concrete girders. In: Engineering Structures, v. 187 (Mai 2019).
https://doi.org/10.1016/j.engstruct.2019.02.068
-
Barr, B. I. G. / Lee, M. M. / de Place Hansen, E. J. / Dupont, D. / Erdem, E. / Schaerlaekens, S. / Schnütgen, B. / Stang, H. / Vandewalle, L. (2003): Round-robin analysis of the RILEM TC 162-TDF beam-bending test: Part 2—Approximation of δ from the CMOD response. In: Materials and Structures, v. 36, n. 9 (November 2003).
https://doi.org/10.1007/bf02483282
-
Barr, B. I. G. / Lee, M. K. / de Place Hansen, E. J. / Dupont, D. / Erdem, E. / Schaerlaekens, S. / Schnütgen, B. / Stang, H. / Vandewalle, L. (2003): Round-robin analysis of the RILEM TC 162-TDF beam-bending test: Part 3—Fibre distribution. In: Materials and Structures, v. 36, n. 9 (November 2003).
https://doi.org/10.1007/bf02483283
-
Barr, B. I. G. / Lee, M. K. / de Place Hansen, E. J. / Dupont, D. / Erdem, E. / Schaerlaekens, S. / Schnütgen, B. / Stang, H. / Vandewalle, L. (2003): Round-robin analysis of the RILEM TC 162-TDF beam-bending test: Part 1—Test method evaluation. In: Materials and Structures, v. 36, n. 9 (November 2003).
https://doi.org/10.1007/bf02483281
-
Vandewalle, L. (2000): Cracking behaviour of concrete beams reinforced with a combination of ordinary reinforcement and steel fibers. In: Materials and Structures, v. 33, n. 3 (April 2000).
https://doi.org/10.1007/bf02479410
-
Vandewalle, L. / Mortelmans, F. (1988): The bond stress between a reinforcement bar and concrete: is it theoretically predictable?. In: Materials and Structures, v. 21, n. 3 (Mai 1988).
https://doi.org/10.1007/bf02473053
-
Imam, M. / Vandewalle, L. / Mortelmans, F. (1995): Are current concerete strength tests suitable for high strength concrete?. In: Materials and Structures, v. 28, n. 7 (August 1995).
https://doi.org/10.1007/bf02473073
-
Barr, B. I. G. / Lee, M. K. / Barragán, B. / Dupont, D. / Gettu, R. / Olesen, J. F. / Stang, H. / Vandewalle, L. (2003): Round-robin analysis of the RILEM TC 162-TDF uni-axial tensile test: Part 1. Test method evaluation. In: Materials and Structures, v. 36, n. 4 (Mai 2003).
https://doi.org/10.1007/bf02479620
-
Barr, B. I. G. / Lee, M. K. / Barragán, B. / Dupont, D. / Gettu, R. / Olesen, J. F. / Stang, H. / Vandewalle, L. (2003): Round-robin analysis of the RILEM TC 162-TDF uni-axial tensile test: Part 2. Fibre distribution. In: Materials and Structures, v. 36, n. 4 (Mai 2003).
https://doi.org/10.1007/bf02479621
-
Boel, V. / Audenaert, K. / De Schutter, G. / Heirman, G. / Vandewalle, L. / Desmet, B. / Vantomme, J. (2007): Transport properties of self compacting concrete with limestone filler or fly ash. In: Materials and Structures, v. 40, n. 5 (Juni 2007).
https://doi.org/10.1617/s11527-006-9159-z
-
Imam, M. / Vandewalle, L. / Mortelmans, F. / van Gemert, D. (1997): Shear domain of fibre-reinforced high-strength concrete beams. In: Engineering Structures, v. 19, n. 9 (September 1997).
https://doi.org/10.1016/s0141-0296(96)00150-2
-
Heirman, G. / Vandewalle, L. / van Gemert, D. / Boel, V. / Audenaert, K. / De Schutter, G. / Desmet, B. / Vantomme, J. (2008): Time-dependent deformations of limestone powder type self-compacting concrete. In: Engineering Structures, v. 30, n. 10 (Oktober 2008).
https://doi.org/10.1016/j.engstruct.2008.04.009
-
De Wilder, K. / Lava, P. / Debruyne, D. / Wang, Y. / de Roeck, G. / Vandewalle, L. (2015): Experimental investigation on the shear capacity of prestressed concrete beams using digital image correlation. In: Engineering Structures, v. 82 (Januar 2015).
https://doi.org/10.1016/j.engstruct.2014.10.034
-
Steensels, R. / Vandewalle, L. / Vandoren, B. / Degee, H. (2017): A two-stage modelling approach for the analysis of the stress distribution in anchorage zones of pre-tensioned, concrete elements. In: Engineering Structures, v. 143 (Juli 2017).
https://doi.org/10.1016/j.engstruct.2017.04.011
-
De Wilder, K. / Lava, P. / Debruyne, D. / Wang, Y. / de Roeck, G. / Vandewalle, L. (2015): Stress field based truss model for shear-critical prestressed concrete beams. In: Structures, v. 3 (August 2015).
https://doi.org/10.1016/j.istruc.2015.02.006
-
De Wilder, K. / de Roeck, G. / Vandewalle, L. (2016): The Use of Advanced Optical Measurement Methods for the Mechanical Analysis of Shear Deficient Prestressed Concrete Members. In: International Journal of Concrete Structures and Materials, v. 10, n. 2 (Juni 2016).
https://doi.org/10.1007/s40069-016-0135-x
-
Georgieva, I. / Schueremans, L. / Vandewalle, L. / Pyl, L. (2012): Design of Built-Up Cold-Formed Steel Columns According to the Direct Strength Method. In: Procedia Engineering, v. 40 ( 2012).
https://doi.org/10.1016/j.proeng.2012.07.066