0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

G. J. Turvey

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Cooper, C. / Turvey, G. J. (1995): Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material. In: Composite Structures, v. 32, n. 1-4 ( 1995).

    https://doi.org/10.1016/0263-8223(95)00071-2

  2. Turvey, G. J. (1996): Effects of load position on the lateral buckling response of pultruded GRP cantilevers —Comparisons between theory and experiment. In: Composite Structures, v. 35, n. 1 ( 1996).

    https://doi.org/10.1016/0263-8223(96)00022-0

  3. Turvey, G. J. (1997): Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections. In: Composite Structures, v. 38, n. 1-4 ( 1997).

    https://doi.org/10.1016/s0263-8223(97)00036-6

  4. Turvey, G. J. / Mulcahy, N. / Widden, M. B. (2000): Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions. In: Composite Structures, v. 50, n. 4 (Dezember 2000).

    https://doi.org/10.1016/s0263-8223(00)00116-1

  5. Turvey, G. J. / Wang, P. (2007): Failure of pultruded GRP single-bolt tension joints under hot–wet conditions. In: Composite Structures, v. 77, n. 4 (Februar 2007).

    https://doi.org/10.1016/j.compstruct.2005.08.024

  6. Turvey, G. J. / Zhang, Y-S. (2018): Flexural moduli and end connection stiffnesses of symmetrically loaded GFRP beams for limit state serviceability design analysis. In: Composite Structures, v. 202 (Oktober 2018).

    https://doi.org/10.1016/j.compstruct.2018.05.081

  7. Turvey, G. J. (2016): CFRP stiffened GFRP continuous beams – A simple closed-form analysis and its experimental verification for serviceability limit deformations. In: Composite Structures, v. 153 (Oktober 2016).

    https://doi.org/10.1016/j.compstruct.2016.06.011

  8. Turvey, G. J. / Cerutti, X. (2015): Effects of splice joint geometry and bolt torque on the serviceability response of pultruded glass fibre reinforced polymer composite beams. In: Composite Structures, v. 131 (November 2015).

    https://doi.org/10.1016/j.compstruct.2015.05.030

  9. Turvey, G. J. (2014): Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams. In: Composite Structures, v. 111 (Mai 2014).

    https://doi.org/10.1016/j.compstruct.2013.12.022

  10. Turvey, G. J. (1979): First Yield Analysis of Laterally Loaded, Simply Supported Mindlin Plates. In: Proceedings of the Institution of Civil Engineers, v. 67, n. 2 (Juni 1979).

    https://doi.org/10.1680/iicep.1979.2473

  11. Turvey, G. J. (1979): Axisymmetric Elasto-Plastic Flexure of Circular Plates in the Large Deflexion Regime. In: Proceedings of the Institution of Civil Engineers, v. 67, n. 1 (März 1979).

    https://doi.org/10.1680/iicep.1979.2318

  12. Turvey, G. J. (1978): First Yield Analysis of Laterally Loaded, Rectangular, Levy Plates with Unsymmetric, Side Boundary Conditions. In: Proceedings of the Institution of Civil Engineers, v. 65, n. 1 (März 1978).

    https://doi.org/10.1680/iicep.1978.2936

  13. Turvey, G. J. (1978): Axisymmetric snap buckling of imperfect, tapered circular plates. In: Computers & Structures, v. 9, n. 6 (Dezember 1978).

    https://doi.org/10.1016/0045-7949(78)90004-4

  14. Turvey, G. J. (1981): Flexural failure analysis of anisotropic elliptic plates. In: Computers & Structures, v. 14, n. 5-6 (Januar 1981).

    https://doi.org/10.1016/0045-7949(81)90066-3

  15. Turvey, G. J. (1984): Effect of shear deformation on the yielding of circular plates. In: Computers & Structures, v. 18, n. 2 (Januar 1984).

    https://doi.org/10.1016/0045-7949(84)90129-9

  16. Turvey, G. J. / Salehi, M. (1991): Computer generated elasto-plastic design data for pressure loaded circular plates. In: Computers & Structures, v. 41, n. 6 (Januar 1991).

    https://doi.org/10.1016/0045-7949(91)90270-v

  17. Lim, G. T. / Turvey, G. J. (1985): Axisymmetric elasto-plastic large deflection behaviour of circular steel plates with initial deflections—A parametric study. In: Computers & Structures, v. 21, n. 6 (Januar 1985).

    https://doi.org/10.1016/0045-7949(85)90174-9

  18. Turvey, G. J. / Zhang, Y. (2006): A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns. In: Computers & Structures, v. 84, n. 22-23 (September 2006).

    https://doi.org/10.1016/j.compstruc.2006.01.028

  19. Turvey, G. J. / Salehi, M. (2005): Annular sector plates: Comparison of full-section and layer yield predictions. In: Computers & Structures, v. 83, n. 28-30 (November 2005).

    https://doi.org/10.1016/j.compstruc.2005.03.025

  20. Turvey, G. J. / Salehi, M. (1997): Circular plates with one diametral stiffener—An elastic large deflection analysis. In: Computers & Structures, v. 63, n. 4 (Mai 1997).

    https://doi.org/10.1016/s0045-7949(96)00077-6

  21. Turvey, G. J. / Der Avanessian, N. G. V. (1986): Elastic large deflection of circular plates using graded finite-differences. In: Computers & Structures, v. 23, n. 6 (Januar 1986).

    https://doi.org/10.1016/0045-7949(86)90244-0

  22. Turvey, G. J. / Der Avanessian, N. G. V. (1986): DR analysis of beams using graded finite differences. In: Computers & Structures, v. 22, n. 5 (Januar 1986).

    https://doi.org/10.1016/0045-7949(86)90262-2

  23. Turvey, G. J. / Salehi, M. (1990): DR large deflection analysis of sector plates. In: Computers & Structures, v. 34, n. 1 (Januar 1990).

    https://doi.org/10.1016/0045-7949(90)90304-k

  24. Salehi, M. / Turvey, G. J. (1991): Elastic large deflection response of annular sector plates—a comparison of dr finite-difference, finite element and other numerical solutions. In: Computers & Structures, v. 40, n. 5 (Januar 1991).

    https://doi.org/10.1016/0045-7949(91)90397-5

  25. Turvey, G. J. / Salehi, M. (2001): Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity. In: Computers & Structures, v. 79, n. 26-28 (November 2001).

    https://doi.org/10.1016/s0045-7949(01)00060-8

  26. Turvey, G. J. / Wang, P. (2009): Failure of pultruded GRP bolted joints: a Taguchi analysis. In: Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics, v. 162, n. 3 (September 2009).

    https://doi.org/10.1680/eacm.2009.162.3.155

  27. Turvey, G. J. (2007): Analysis of bending tests on CFRP-stiffened pultruded GRP beams. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 160, n. 1 (Februar 2007).

    https://doi.org/10.1680/stbu.2007.160.1.37

  28. Turvey, G. J. / Wang, P. (2009): Environmental effects on the failure of GRP multi-bolt joints. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 162, n. 4 (August 2009).

    https://doi.org/10.1680/stbu.2009.162.4.275

  29. Turvey, G. J. (2000): Bolted connections in PFRP structures. In: Progress in Structural Engineering and Materials, v. 2, n. 2 ( 2000).

    https://doi.org/10.1002/1528-2716(200004/06)2:2<146::aid-pse18>3.3.co;2-s

  30. Turvey, G. J. (2000): Bolted connections in PFRP structures. In: Progress in Structural Engineering and Materials, v. 2, n. 2 ( 2000).

    https://doi.org/10.1002/1528-2716(200004/06)2:2<146::aid-pse18>3.0.co;2-0

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine