Ye Tian 
- (2023): Dynamic self-balanced electrochemical model for non-uniform corrosion of steel reinforcement in concrete under combined effects of heat-moisture-chlorine-oxygen. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2023): The influence of longitudinal rebar type and stirrup ratio on the bond performance of reinforced concrete with corrosion. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Corrosion damages of reinforced concrete characterized by X-ray CT and DVC techniques. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2024): Dynamic Electrochemical Model of Steel Corrosion in Concrete Microenvironment under Multifield Action of Heat-Moisture-Chlorine. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (Januar 2024).
- (2023): Experimental recognition of seismic performance of simple bolt-connected precast frame by comparing with equal stiffness cast-in-situ frame. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Assessment of thermal environment and thermal comfort in a typical composite ice shell building. In: Building and Environment, v. 241 (August 2023).
- (2023): Corrosion of steel rebar in concrete induced by chloride ions under natural environments. In: Construction and Building Materials, v. 369 (März 2023).
- (2022): High-performance dual-sensitive flexible sensors based on conductive alginate sponge electrode/polyvinylidene fluoride microporous composite film. In: Smart Materials and Structures, v. 32, n. 1 (2 Dezember 2022).
- (2021): Adaptability of polyurethane/water glass grouting reinforcement to subsea tunnels. In: Construction and Building Materials, v. 311 (Dezember 2021).
- (2021): Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (Dezember 2021).
- (2021): Evaluation of the Bending Failure of Columns under an Embankment Loading. In: International Journal of Geomechanics, v. 21, n. 7 (Juli 2021).
- (2018): Comparative Performance Assessment of a U-Shaped Recuperative Radiant Tube under Conventional and MILD Combustion Modes. In: Journal of Energy Engineering, v. 144, n. 3 (Juni 2018).
- (2020): Investigating vehicle roadway usage patterns on the Shanghai urban expressway system and their impacts on traffic safety. In: International Journal of Sustainable Transportation, v. 15, n. 3 (April 2020).
- (2020): Carbonation process simulation for cement-based materials based on microstructure by a cement hydration model. In: Construction and Building Materials, v. 259 (Oktober 2020).
- (2020): Effect of aggregates spatial distribution on three-dimensional transport of chloride ions in reinforced concrete. In: Construction and Building Materials, v. 259 (Oktober 2020).
- (2020): A comparison study on the natural and half-soaking galvanic accelerated corrosion of reinforced concrete based on an improved electrochemical model. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): The influence of Si/Al ratio on sulfate durability of metakaolin-based geopolymer. In: Construction and Building Materials, v. 265 (Dezember 2020).
- (2018): Coupling effect of temperature and relative humidity diffusion in concrete under ambient conditions. In: Construction and Building Materials, v. 159 (Januar 2018).
- (2014): Fracture property of steel fiber reinforced concrete at early age. In: Computers and Concrete, v. 13, n. 1 (Januar 2014).
- (2019): Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 11 (November 2019).
- (2019): An investigation on the three-dimensional transport of chloride ions in concrete based on X-ray computed tomography technology. In: Construction and Building Materials, v. 221 (Oktober 2019).
- (2019): Fully parallel level set method for large-scale structural topology optimization. In: Computers & Structures, v. 221 (September 2019).
- (2011): Interactions between Organic and Inorganic Phases in PA- and PU/PA-Modified-Cement-Based Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 10 (Oktober 2011).
- (2016): Mechanical Behavior and Design of FRP Structural Members at High and Low Service Temperatures. In: Journal of Composites for Construction, v. 20, n. 5 (Oktober 2016).
- (2015): Day-to-Day Market Power and Efficiency in Tradable Mobility Credits. In: International Journal of Transportation Science and Technology, v. 4, n. 3 (September 2015).
- (2013): Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions. In: Construction and Building Materials, v. 47 (Oktober 2013).
- (2016): A coupled hygro-thermal model of early-age concrete based on micro-pore structure evolution. In: Construction and Building Materials, v. 111 (Mai 2016).
- (2007): Feasibility analysis of mixed-income housing in China. In: Frontiers of Architecture and Civil Engineering in China, v. 1, n. 3 (Juli 2007).
Structurae kooperiert mit
