0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Andrzej Teter

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Teter, Andrzej / Kolakowski, Zbigniew (2024): Susceptibility versus flexural stiffness in the stability of hybrid laminate columns with a rectangular cross section for a 1D model. In: Composite Structures, v. 345 (Oktober 2024).

    https://doi.org/10.1016/j.compstruct.2024.118362

  2. Debski, Hubert / Kubiak, Tomasz / Teter, Andrzej (2013): Experimental investigation of channel-section composite profiles’ behavior with various sequences of plies subjected to static compression. In: Thin-Walled Structures, v. 71 (Oktober 2013).

    https://doi.org/10.1016/j.tws.2013.07.008

  3. Teter, Andrzej / Kolakowski, Zbigniew (2023): Global buckling of axially functionally graded columns with variable boundary conditions. In: Composite Structures, v. 304 (Januar 2023).

    https://doi.org/10.1016/j.compstruct.2022.116430

  4. Gawryluk, Jarosław / Teter, Andrzej (2022): Using experimental non-contact methods to discuss on a damage process of laminated thin-walled L-columns under ends shortening. In: Composite Structures, v. 289 (Juni 2022).

    https://doi.org/10.1016/j.compstruct.2022.115519

  5. Kolakowski, Zbigniew / Teter, Andrzej (2022): Imperfection sensitivity of FGM cylindrical shells under compression. In: Composite Structures, v. 291 (Juli 2022).

    https://doi.org/10.1016/j.compstruct.2022.115548

  6. Kolakowski, Zbigniew / Teter, Andrzej (2022): Modified methods for estimation of local bifurcational loads including an effect of moderate geometrical inaccuracies. In: Composite Structures, v. 279 (Januar 2022).

    https://doi.org/10.1016/j.compstruct.2021.114869

  7. Gawryluk, Jarosław / Teter, Andrzej (2021): Experimental-numerical studies on the first-ply failure analysis of real, thin walled laminated angle columns subjected to uniform shortening. In: Composite Structures, v. 269 (August 2021).

    https://doi.org/10.1016/j.compstruct.2021.114046

  8. Teter, Andrzej / Kolakowski, Zbigniew / Jankowski, Jacek (2020): How to determine a value of the bifurcation shortening of real thin-walled laminated columns subjected to uniform compression?. In: Composite Structures, v. 247 (September 2020).

    https://doi.org/10.1016/j.compstruct.2020.112430

  9. Gawryluk, Jarosław / Mitura, Andrzej / Teter, Andrzej (2020): Dynamic control of kinematically excited laminated, thin-walled beam using macro fibre composite actuator. In: Composite Structures, v. 236 (März 2020).

    https://doi.org/10.1016/j.compstruct.2020.111898

  10. Teter, Andrzej / Kolakowski, Zbigniew / Mania, Radoslaw J. (2019): Transverse inhomogeneity of laminated cylindrical panel influence on post-buckling behaviour. In: Composite Structures, v. 225 (Oktober 2019).

    https://doi.org/10.1016/j.compstruct.2019.111138

  11. Teter, Andrzej / Gawryluk, Jarosław / Bocheński, Marcin (2018): Experimental and numerical studies of a cracked thin-walled box-beams. In: Composite Structures, v. 202 (Oktober 2018).

    https://doi.org/10.1016/j.compstruct.2018.04.029

  12. Teter, Andrzej / Mania, Radoslaw J. / Kolakowski, Zbigniew (2018): Non-linear stability and load-carrying capacity of thin-walled laminated columns in aspects of coupled buckling and coupled stiffness submatrix. In: Composite Structures, v. 192 (Mai 2018).

    https://doi.org/10.1016/j.compstruct.2018.02.070

  13. Teter, Andrzej / Mania, Radoslaw J. / Kolakowski, Zbigniew (2017): Effect of selected elements of the coupling stiffness submatrix on the load-carrying capacity of hybrid columns under compression. In: Composite Structures, v. 180 (November 2017).

    https://doi.org/10.1016/j.compstruct.2017.08.001

  14. Manoach, Emil / Warminski, Jerzy / Kloda, Lukasz / Teter, Andrzej (2017): Numerical and experimental studies on vibration based methods for detection of damage in composite beams. In: Composite Structures, v. 170 (Juni 2017).

    https://doi.org/10.1016/j.compstruct.2017.03.005

  15. Teter, Andrzej / Mania, Radoslaw J. / Kolakowski, Zbigniew (2017): Non-linear multi-mode buckling of non-symmetric FML/FGM thin-walled columns with open cross-sections under compression. In: Composite Structures, v. 167 (Mai 2017).

    https://doi.org/10.1016/j.compstruct.2017.01.072

  16. Teter, Andrzej / Kolakowski, Zbigniew (2017): Influence of mechanical couplings on the buckling behaviour of thin-walled plates made of general laminates under compression. In: Composite Structures, v. 166 (April 2017).

    https://doi.org/10.1016/j.compstruct.2017.01.060

  17. Teter, Andrzej / Gawryluk, Jarosław (2016): Experimental modal analysis of a rotor with active composite blades. In: Composite Structures, v. 153 (Oktober 2016).

    https://doi.org/10.1016/j.compstruct.2016.06.013

  18. Debski, Hubert / Teter, Andrzej / Kubiak, Tomasz / Samborski, Sylwester (2016): Local buckling, post-buckling and collapse of thin-walled channel section composite columns subjected to quasi-static compression. In: Composite Structures, v. 136 (Februar 2016).

    https://doi.org/10.1016/j.compstruct.2015.11.008

  19. Urbaniak, Mariusz / Teter, Andrzej / Kubiak, Tomasz (2015): Influence of boundary conditions on the critical and failure load in the GFPR channel cross-section columns subjected to compression. In: Composite Structures, v. 134 (Dezember 2015).

    https://doi.org/10.1016/j.compstruct.2015.08.076

  20. Debski, Hubert / Teter, Andrzej (2015): Numerical and experimental studies on the limit state of fibre-reinforced composite columns with a lipped channel section under quasi-static compression. In: Composite Structures, v. 133 (Dezember 2015).

    https://doi.org/10.1016/j.compstruct.2015.07.053

  21. Kubiak, Tomasz / Samborski, Sylwester / Teter, Andrzej (2015): Experimental investigation of failure process in compressed channel-section GFRP laminate columns assisted with the acoustic emission method. In: Composite Structures, v. 133 (Dezember 2015).

    https://doi.org/10.1016/j.compstruct.2015.08.023

  22. Kolakowski, Zbigniew / Teter, Andrzej (2015): Load carrying capacity of functionally graded columns with open cross-sections under static compression. In: Composite Structures, v. 129 (Oktober 2015).

    https://doi.org/10.1016/j.compstruct.2015.03.072

  23. Kolakowski, Zbigniew / Teter, Andrzej (2015): Static interactive buckling of functionally graded columns with closed cross-sections subjected to axial compression. In: Composite Structures, v. 123 (Mai 2015).

    https://doi.org/10.1016/j.compstruct.2014.12.051

  24. Debski, Hubert / Teter, Andrzej / Kubiak, Tomasz (2014): Numerical and experimental studies of compressed composite columns with complex open cross-sections. In: Composite Structures, v. 118 (Dezember 2014).

    https://doi.org/10.1016/j.compstruct.2014.07.033

  25. Debski, Hubert / Kubiak, Tomasz / Teter, Andrzej (2013): Buckling and postbuckling behaviour of thin-walled composite channel section column. In: Composite Structures, v. 100 (Juni 2013).

    https://doi.org/10.1016/j.compstruct.2012.12.033

  26. Teter, Andrzej / Kolakowski, Zbigniew (2013): Coupled dynamic buckling of thin-walled composite columns with open cross-sections. In: Composite Structures, v. 95 (Januar 2013).

    https://doi.org/10.1016/j.compstruct.2012.08.006

  27. Teter, Andrzej / Kolakowski, Zbigniew (2019): On using load-axial shortening plots to determine the approximate buckling load of short, real angle columns under compression. In: Composite Structures, v. 212 (März 2019).

    https://doi.org/10.1016/j.compstruct.2019.01.009

  28. Gawryluk, Jarosław / Mitura, Andrzej / Teter, Andrzej (2019): Dynamic response of a composite beam rotating at constant speed caused by harmonic excitation with MFC actuator. In: Composite Structures, v. 210 (Februar 2019).

    https://doi.org/10.1016/j.compstruct.2018.11.083

  29. Teter, Andrzej (2011): Dynamic critical load based on different stability criteria for coupled buckling of columns with stiffened open cross-sections. In: Thin-Walled Structures, v. 49, n. 5 (Mai 2011).

    https://doi.org/10.1016/j.tws.2010.09.018

  30. Teter, Andrzej / Debski, Hubert / Samborski, Sylwester (2014): On buckling collapse and failure analysis of thin-walled composite lipped-channel columns subjected to uniaxial compression. In: Thin-Walled Structures, v. 85 (Dezember 2014).

    https://doi.org/10.1016/j.tws.2014.09.010

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine