0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

J. G. Teng

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Zheng, B. T. / Teng, J. G. (2022): A plasticity constitutive model for concrete under multiaxial compression. In: Engineering Structures, v. 251 (Januar 2022).

    https://doi.org/10.1016/j.engstruct.2021.113435

  2. Shen, Hui-Shen / Teng, J. G. (2004): Postbuckling analysis of unilaterally constrained laminated thin plates. In: Composite Structures, v. 66, n. 1-4 (Oktober 2004).

    https://doi.org/10.1016/j.compstruct.2004.05.005

  3. Nie, X. F. / Fu, B. / Teng, J. G. / Bank, L. C. / Tian, Y. (2020): Shear behavior of reinforced concrete beams with GFRP needles. In: Construction and Building Materials, v. 257 (Oktober 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.119430

  4. Teng, J. G. / Gabriel, B. (1998): Sleeved Cone-Cylinder Intersection under Internal Pressure. In: Journal of Engineering Mechanics (ASCE), v. 124, n. 9 (September 1998).

    https://doi.org/10.1061/(asce)0733-9399(1998)124:9(971)

  5. Teng, J. G. / Rotter, J. M. (1989): Plastic collapse of restrained steel silo hoppers. In: Journal of Constructional Steel Research, v. 14, n. 2 (Januar 1989).

    https://doi.org/10.1016/0143-974x(89)90020-5

  6. Teng, J. G. / Rotter, J. M. (1991): Plastic buckling of rings at steel silo transition junctions. In: Journal of Constructional Steel Research, v. 19, n. 1 (Januar 1991).

    https://doi.org/10.1016/0143-974x(91)90060-e

  7. Teng, J. G. / Rotter, J. M. (1992): Recent research on the behaviour and design of steel silo hoppers and transition junctions. In: Journal of Constructional Steel Research, v. 23, n. 1-3 (Januar 1992).

    https://doi.org/10.1016/0143-974x(92)90049-k

  8. Quach, W. M. / Teng, J. G. / Chung, K. F. (2009): Residual stresses in press-braked stainless steel sections, II: Press-braking operations. In: Journal of Constructional Steel Research, v. 65, n. 8-9 (August 2009).

    https://doi.org/10.1016/j.jcsr.2009.04.011

  9. Quach, W. M. / Teng, J. G. / Chung, K. F. (2009): Residual stresses in press-braked stainless steel sections, I: Coiling and uncoiling of sheets. In: Journal of Constructional Steel Research, v. 65, n. 8-9 (August 2009).

    https://doi.org/10.1016/j.jcsr.2009.04.007

  10. Teng, J. G. / Lam, L. / Chan, W. / Wang, J. (2000): Retrofitting of Deficient RC Cantilever Slabs Using GFRP Strips. In: Journal of Composites for Construction, v. 4, n. 2 (Mai 2000).

    https://doi.org/10.1061/(asce)1090-0268(2000)4:2(75)

  11. Fernando, D. / Teng, J. G. / Yu, T. / Zhao, X. L. (2013): Preparation and Characterization of Steel Surfaces for Adhesive Bonding. In: Journal of Composites for Construction, v. 17, n. 6 (Dezember 2013).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000387

  12. Teng, J. G. / Jiang, T. / Lam, L. / Luo, Y. Z. (2009): Refinement of a Design-Oriented Stress–Strain Model for FRP-Confined Concrete. In: Journal of Composites for Construction, v. 13, n. 4 (August 2009).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000012

  13. Chen, G. M. / Teng, J. G. / Chen, J. F. (2013): Shear Strength Model for FRP-Strengthened RC Beams with Adverse FRP-Steel Interaction. In: Journal of Composites for Construction, v. 17, n. 1 (Februar 2013).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000313

  14. Gao, W. Y. / Dai, Jian-Guo / Teng, J. G. (2015): Simple Method for Predicting Temperatures in Insulated, FRP-Strengthened RC Members Exposed to a Standard Fire. In: Journal of Composites for Construction, v. 19, n. 6 (Dezember 2015).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000566

  15. Zhang, L. / Teng, J. G. (2010): Simple General Solution for Interfacial Stresses in Plated Beams. In: Journal of Composites for Construction, v. 14, n. 4 (August 2010).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000099

  16. Lu, X. Z. / Chen, J. F. / Ye, L. P. / Teng, J. G. / Rotter, J. M. (2009): RC beams shear-strengthened with FRP: Stress distributions in the FRP reinforcement. In: Construction and Building Materials, v. 23, n. 4 (April 2009).

    https://doi.org/10.1016/j.conbuildmat.2008.09.019

  17. Chen, G. M. / Teng, J. G. / Chen, J. F. (2010): RC beams shear-strengthened with FRP: shear resistance contributed by FRP. In: Magazine of Concrete Research, v. 62, n. 4 (April 2010).

    https://doi.org/10.1680/macr.2010.62.4.301

  18. Gao, W. Y. / Dai, J. G. / Teng, J. G. (2014): Simple Method for Predicting Temperatures in Reinforced Concrete Beams Exposed to a Standard Fire. In: Advances in Structural Engineering, v. 17, n. 4 (April 2014).

    https://doi.org/10.1260/1369-4332.17.4.573

  19. Smith, S. T. / Teng, J. G. (2003): Shear-Bending Interaction in Debonding Failures of FRP-Plated RC Beams. In: Advances in Structural Engineering, v. 6, n. 3 (August 2003).

    https://doi.org/10.1260/136943303322419214

  20. Chen, J. F. / Rotter, J. M. / Teng, J. G. (2006): A Simple Remedy for Elephant's Foot Buckling in Cylindrical Silos and Tanks. In: Advances in Structural Engineering, v. 9, n. 3 (Juni 2006).

    https://doi.org/10.1260/136943306777641968

  21. Teng, J. G. / Barbagallo, M. (1997): Shell restraint to ring buckling at cone-cylinder intersections. In: Engineering Structures, v. 19, n. 6 (Juni 1997).

    https://doi.org/10.1016/s0141-0296(96)00087-9

  22. Quach, W. M. / Teng, J. G. / Chung, K. F. (2004): Residual stresses in steel sheets due to coiling and uncoiling: a closed-form analytical solution. In: Engineering Structures, v. 26, n. 9 (Juli 2004).

    https://doi.org/10.1016/j.engstruct.2004.04.005

  23. Wang, Guo-Lin / Dai, Jian-Guo / Teng, J. G. (2012): Shear strength model for RC beam–column joints under seismic loading. In: Engineering Structures, v. 40 (Juli 2012).

    https://doi.org/10.1016/j.engstruct.2012.02.038

  24. Teng, J. G. / Yao, J. (2007): Plate end debonding in FRP-plated RC beams—II: Strength model. In: Engineering Structures, v. 29, n. 10 (Oktober 2007).

    https://doi.org/10.1016/j.engstruct.2006.11.023

  25. Yao, J. / Teng, J. G. (2007): Plate end debonding in FRP-plated RC beams—I: Experiments. In: Engineering Structures, v. 29, n. 10 (Oktober 2007).

    https://doi.org/10.1016/j.engstruct.2006.11.022

  26. Teng, J. G. / Chan, F. (2001): Plastic buckling strength of T-section transition ringbeams in steel silos and tanks. In: Engineering Structures, v. 23, n. 3 (März 2001).

    https://doi.org/10.1016/s0141-0296(00)00034-1

  27. Teng, J. G. / Lam, L. / Chen, J. F. (2004): Shear strengthening of RC beams with FRP composites. In: Progress in Structural Engineering and Materials, v. 6, n. 3 (Juli 2004).

    https://doi.org/10.1002/pse.179

  28. Teng, J. G. (1997): Plastic Buckling Approximation for Transition Ringbeams in Steel Silos. In: Journal of Structural Engineering (ASCE), v. 123, n. 12 (Dezember 1997).

    https://doi.org/10.1061/(asce)0733-9445(1997)123:12(1622)

  29. Chen, J. F. / Teng, J. G. (2003): Shear Capacity of Fiber-Reinforced Polymer-Strengthened Reinforced Concrete Beams: Fiber Reinforced Polymer Rupture. In: Journal of Structural Engineering (ASCE), v. 129, n. 5 (Mai 2003).

    https://doi.org/10.1061/(asce)0733-9445(2003)129:5(615)

  30. Chen, J. F. / Teng, J. G. (2003): Shear capacity of FRP-strengthened RC beams: FRP debonding. In: Construction and Building Materials, v. 17, n. 1 (Februar 2003).

    https://doi.org/10.1016/s0950-0618(02)00091-0

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine