Rui Tang 
- (2025): Effect of supply water temperature on frosting performance of air source heat pump and indoor thermal environment in space heating. In: Building and Environment, v. 267 (Januar 2025).
- (2024): Comparison of Deterministic, Stochastic, and Energy-Data-Driven Occupancy Models for Building Stock Energy Simulation. In: Buildings, v. 14, n. 9 (25 August 2024).
- (2024): Experimental Study and Mechanism Analysis of the Dynamic Performance of Plain Concrete under Combined Compression and Shear. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 8 (August 2024).
- (2023): Experimental study and failure criterion analysis of dynamic mechanical performance of hydraulic asphalt concrete under combined compression-shear stresses. In: Materials and Structures, v. 57, n. 1 (26 Dezember 2023).
- (2024): Longitudinal Seismic Response of a Shield Tunnel Considering Longitudinal Bolt Prestress under Transverse Excitation. In: International Journal of Geomechanics, v. 24, n. 3 (März 2024).
- (2024): Influence of Different Circumferential Bolts on the Seismic Response of Shield Tunnel. In: Journal of Earthquake Engineering, v. 28, n. 9 (Februar 2024).
- (2024): A particle_scale insight into the face stability of shallow EPB shield tunnels in dry cobble-rich soil. In: Tunnelling and Underground Space Technology, v. 144 (Februar 2024).
- (2023): A new method for estimating the smart readiness of building stock data using Display Energy Certificate data. In: Energy and Buildings, v. 301 (Dezember 2023).
- (2023): In-situ sensor calibration for building HVAC systems with limited information using general regression improved Bayesian inference. In: Building and Environment, v. 234 (April 2023).
- (2022): Preparation and performance analysis of recycled PET fiber reinforced recycled foamed concrete. In: Journal of Building Engineering, v. 57 (Oktober 2022).
- (2022): An experimental study and failure mechanism analysis on dynamic behaviors of plain concrete under biaxial compression-compression. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2021): Experimental study and failure criterion analysis on combined compression-shear performance of rubber concrete (RC) with different rubber replacement ratio. In: Construction and Building Materials, v. 288 (Juni 2021).
- (2021): Improving airport runway rigid pavement design using influence surfaces. In: Construction and Building Materials, v. 284 (Mai 2021).
- (2022): Experimental Study on the Influence of Size Effects on Compressive Dynamic Behavior of Lightweight Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 1 (Januar 2022).
- (2021): Full-scale test on seismic performance of circumferential joint of shield-driven tunnel. In: Soil Dynamics and Earthquake Engineering, v. 151 (Dezember 2021).
- (2021): A novel deep generative modeling-based data augmentation strategy for improving short-term building energy predictions. In: Building Simulation, v. 15, n. 2 (August 2021).
- (2021): Data-driven model predictive control for power demand management and fast demand response of commercial buildings using support vector regression. In: Building Simulation, v. 15, n. 3 (September 2021).
- (2021): Experimental Study on Dynamic Performance of Plain Concrete and Lightweight Aggregate Concrete under Uniaxial Loading. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 9 (September 2021).
- (2021): Analysis of Damage Mechanism of Tunnel Lining Structure under the Coupling Action of Active Fault. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2017): Magnetic flux leakage structural health monitoring of concrete rebar using an open electromagnetic excitation technique. In: Structural Health Monitoring, v. 17, n. 2 (Januar 2017).
- (2021): Electrical Conductivity-Based Estimation of Unfrozen Water Content in Saturated Saline Frozen Sand. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): A lightweight iterative error reconstruction network for infrared image super-resolution in smart grid. In: Sustainable Cities and Society, v. 66 (März 2021).
- (2020): Cellular automaton model for social forces interaction in building evacuation for sustainable society. In: Sustainable Cities and Society, v. 53 (Februar 2020).
- (2020): Impacts of technology-guided occupant behavior on air-conditioning system control and building energy use. In: Building Simulation, v. 14, n. 1 (November 2020).
- (2019): A fast building demand response method based on supply–demand coordination for urgent responses to smart grids. In: Science and Technology for the Built Environment, v. 25, n. 10 (26 November 2019).
- (2016): A power limiting control strategy based on adaptive utility function for fast demand response of buildings in smart grids. In: Science and Technology for the Built Environment, v. 22, n. 6 (August 2016).
- (2019): Multi-axial test and failure criterion analysis on self-compacting lightweight aggregate concrete. In: Construction and Building Materials, v. 215 (August 2019).
- (2018): A direct load control strategy of centralized air-conditioning systems for building fast demand response to urgent requests of smart grids. In: Automation in Construction, v. 87 (März 2018).
- (2018): Direct chiller power limiting for peak demand limiting control in buildings—Methodology and on-site validation. In: Automation in Construction, v. 85 (Januar 2018).
- (2018): Optimal and near-optimal indoor temperature and humidity controls for direct load control and proactive building demand response towards smart grids. In: Automation in Construction, v. 96 (Dezember 2018).
Structurae kooperiert mit
