Wei Sun 
- (2025): An improved damage plastic model for RC structure FE modelling under cyclic loading conditions. In: Engineering Structures, v. 322 (Januar 2025).
- (2024): Heterogenous impact of background meteorological factors on cooling effect of two typical urban parks: Evidence from Shanghai, China. In: Building and Environment, v. 265 (November 2024).
- (2024): Frequency trajectory and modal analysis of variable stiffness composite cylindrical shells with flange. In: Composite Structures, v. 344 (September 2024).
- (2024): Immobilization of phosphorus and fluorine from whole phosphogypsum-based cemented backfill material with self-cementing properties. In: Construction and Building Materials, v. 438 (August 2024).
- (2023): The Impact of New Composite Curing Agents on the Curing Properties of Glacial Debris in the Pulang Copper Deposit. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2004): The influence of mineral admixtures on resistance to corrosion of steel bars in green high-performance concrete. In: Cement and Concrete Research, v. 34, n. 10 (Oktober 2004).
- (2004): Fly ash effects. In: Cement and Concrete Research, v. 34, n. 11 (November 2004).
- (2022): Identification of damage mechanisms of polymer-concrete in direct shearing tests by acoustic emission. In: Construction and Building Materials, v. 351 (Oktober 2022).
- (2023): Full-scale experiment for segmental linings of deep-buried shield tunnels bearing high inner water pressure: Comparison of mechanical behaviors of continuous- and stagger-jointed structures. In: Underground Space, v. 8 (Februar 2023).
- (2022): Investigation on fracture characteristics and failure pattern of inclined layered cemented tailings backfill. In: Construction and Building Materials, v. 343 (August 2022).
- (2021): Investigation on impact damage and shear after impact (SAI) behavior of grid stiffened panels. In: Composite Structures, v. 277 (Dezember 2021).
- (2020): Impact of urban morphology and landscape characteristics on spatiotemporal heterogeneity of land surface temperature. In: Sustainable Cities and Society, v. 63 (Dezember 2020).
- (2020): Improving the design method of a solar heating system considering weather uncertainty and system reliability. In: Energy and Buildings, v. 208 (Februar 2020).
- (2018): Impacts of configurations on the strength of FRP anchors. In: Composite Structures, v. 194 (Juni 2018).
- (2020): Influence of Addition of Polycarboxylate-Based Superplasticizer on Properties of High Performance Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (März 2020).
- (2018): Investigation of rheological and chemical properties asphalt binder rejuvenated with waste vegetable oil. In: Construction and Building Materials, v. 180 (August 2018).
- (2019): Impact of Temperature on the Strength Development of the Tailing-Waste Rock Backfill of a Gold Mine. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Influence of Hybrid Fiber Reinforcement on Mechanical Properties and Autogenous Shrinkage of an Ecological UHPFRCC. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 5 (Mai 2019).
- (2015): Interactive Effect of Mechanical Fatigue Load and the Fatigue Effect of Freeze-Thaw on Combined Damage of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 8 (August 2015).
- (2019): Influence of sodium hydroxide on the performance and hydration of lime-based low carbon cementitious materials. In: Construction and Building Materials, v. 200 (März 2019).
- (2013): Freezing–thawing durability and its improvement of high strength shrinkage compensation concrete with high volume mineral admixtures. In: Construction and Building Materials, v. 39 (Februar 2013).
- (2014): Fractal and multifractal analysis on pore structure in cement paste. In: Construction and Building Materials, v. 69 (Oktober 2014).
- (2016): Influence of chloride concentration and pre-passivation on the pitting corrosion resistance of low-alloy reinforcing steel in simulated concrete pore solution. In: Construction and Building Materials, v. 111 (Mai 2016).
- (2019): Improving the chloride binding capacity of cement paste by adding nano-Al2O3. In: Construction and Building Materials, v. 195 (Januar 2019).
- (2019): Investigation on porosity of partly carbonated paste specimens blended with fly ash through dual CT scans. In: Construction and Building Materials, v. 196 (Januar 2019).
- (2012): In situ dynamic XCT imaging of the microstructure evolution of cement mortar in accelerated carbonation reaction. In: Magazine of Concrete Research, v. 64, n. 11 (November 2012).
- (2016): Hierarchical modeling method and dynamic characteristics of cutter head driving system in tunneling boring machine. In: Tunnelling and Underground Space Technology, v. 52 (Februar 2016).
- (2013): High precision fiber SINS with spin technology. In: China Ocean Engineering, v. 27, n. 5 (Oktober 2013).
- (2009): Health monitoring of reinforced concrete shear walls using smart aggregates. In: Smart Materials and Structures, v. 18, n. 4 (April 2009).
- (2018): Influence of Surface Condition on the Electrochemical Behavior of Alloy Steel in Saturated Ca(OH)2 Solution. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 9 (September 2018).
Structurae kooperiert mit
