Kolluru V. L. Subramaniam 
- (2024): Fracture in 3D-Printed Concrete Beams: Deflection and Penetration of Impinging Cracks at Layer Interfaces. In: Journal of Engineering Mechanics (ASCE), v. 150, n. 12 (Dezember 2024).
- (2024): Fly Ash–Based Aqueous Nanosilica Enhanced Activator for Efficient Production of Room Temperature–Cured Concrete with Two-Part Alkali-Activated Binders. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (Oktober 2024).
- (2024): Rheology control and 3D concrete printing with fly ash-based aqueous nano-silica enhanced alkali-activated binders. In: Materials and Structures, v. 57, n. 5 (16 Mai 2024).
- (2023): Evaluation of cracking and cohesive fracture response in recycled aggregate concrete. In: Materials and Structures, v. 56, n. 7 (10 August 2023).
- (2023): Influence of Process Variables on Shrinkage in Low-Calcium Fly-Ash Geopolymers. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 6 (Juni 2023).
- (2022): Porosity and pore structure control in cellular geopolymer using rheology and surface tension modifiers. In: Construction and Building Materials, v. 323 (März 2022).
- (2022): High-Temperature Performance of Low-Calcium Fly Ash–Based Geopolymers. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 5 (Mai 2022).
- (2021): In situ embedded PZT sensor for monitoring 3D concrete printing: application in alkali-activated fly ash-slag geopolymers. In: Smart Materials and Structures, v. 30, n. 12 (November 2021).
- (2021): Cohesive Fracture and Fiber Pullout Responses in Normal and SCC Fiber–Reinforced Concrete. In: Journal of Engineering Mechanics (ASCE), v. 147, n. 12 (Dezember 2021).
- (2021): Experimental evaluation and analysis of flexural response of sandwich beam panels with an expanded polystyrene core. In: Structures, v. 33 (Oktober 2021).
- (1995): Design curves for prestressed concrete rectangular beam sections based on BS 8110. In: Structural Engineering and Mechanics, v. 3, n. 6 (November 1995).
- (2020): Blast Furnace Slag Hydration in an Alkaline Medium: Influence of Sodium Content and Sodium Hydroxide Molarity. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 12 (Dezember 2020).
- (2020): Evaluation of Total Reactive Oxide Ratios and Working Solution Ratios on Strength Development in Fly Ash–Based Geopolymers. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 4 (April 2020).
- (2020): Embedded electrical impedance-based PZT sensor for monitoring hydrating concrete: development and evaluation. In: Smart Materials and Structures, v. 29, n. 5 (27 März 2020).
- (2020): Behavior of Short Reinforced Concrete Column Elements with Buckling-Resistant Antispring-Clad Reinforcing Bars (BRASR) under Axial Compression. In: Journal of Structural Engineering (ASCE), v. 146, n. 2 (Februar 2020).
- (2019): Experimental Investigation and Interface Material Model for the Cohesive–Frictional Shear Response of Soft-Brick Masonry under Applied Compression. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 12 (Dezember 2019).
- (2019): Cohesive-frictional interface fracture behavior in soft-brick masonry: experimental investigation and theoretical development. In: Materials and Structures, v. 52, n. 2 (Februar 2019).
- (2019): Efficiency of steel fibers in shear resistance of reinforced concrete beams without stirrups at different moment-to-shear ratios. In: Engineering Structures, v. 188 (Juni 2019).
- (2016): Quantitative XRD Analysis of Binary Blends of Siliceous Fly Ash and Hydrated Cement. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 8 (August 2016).
- (2016): Experimental evaluation of load-induced damage in concrete from distributed microcracks to localized cracking on electro-mechanical impedance response of bonded PZT. In: Construction and Building Materials, v. 105 (Februar 2016).
- (2016): Quantitative XRD study of amorphous phase in alkali activated low calcium siliceous fly ash. In: Construction and Building Materials, v. 124 (Oktober 2016).
- (2017): Evaluation of Crack Propagation and Post-cracking Hinge-type Behavior in the Flexural Response of Steel Fiber Reinforced Concrete. In: International Journal of Concrete Structures and Materials, v. 11, n. 2 (Juni 2017).
- (2017): Experimental investigation of compressive failure in masonry brick assemblages made with soft brick. In: Materials and Structures, v. 50, n. 1 (Februar 2017).
- (2017): Experimental investigation of crack propagation and post-cracking behaviour in macrosynthetic fibre reinforced concrete. In: Magazine of Concrete Research, v. 69, n. 9 (Mai 2017).
- (2017): Investigation of the dilatant behavior of cracks in the shear response of steel fiber reinforced concrete beams. In: Engineering Structures, v. 152 (Dezember 2017).
- (2016): Identification of Early-Age Cracking in Concrete Bridge Decks. In: Journal of Performance of Constructed Facilities (ASCE), v. 30, n. 6 (Dezember 2016).
- (2018): PZT sensor array for local and distributed measurements of localized cracking in concrete. In: Smart Materials and Structures, v. 27, n. 7 (Juli 2018).
- (2016): Influence of Temperature and Added Lime on the Glassy Phase Dissolution in Low-calcium Fly ash Binary Blend. In: Journal of Advanced Concrete Technology, v. 14, n. 9 ( 2016).
- (2018): Improvements in fracture behavior and shear capacity of fiber reinforced normal and self consolidating concrete: A comparative study. In: Construction and Building Materials, v. 189 (November 2018).
- (2018): Influence of Steel Fibers on Fracture Energy and Shear Behavior of SCC. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 11 (November 2018).
Structurae kooperiert mit
