Brent Stephens 
- (2024): Ten questions concerning building electrification. In: Building and Environment, v. 261 (August 2024).
- (2023): Design and demonstration of a prototype thermally active student desk in a modern landmark for personalized cooling retrofits. In: Science and Technology for the Built Environment, v. 30, n. 4 (Dezember 2023).
- (2023): Occupant thermal comfort and indoor environmental conditions in Mies van der Rohe’s S. R. Crown Hall. In: Building Research & Information, v. 52, n. 3 (September 2023).
- (2022): Evaluation of an in-duct bipolar ionization device on particulate matter and gas-phase constituents in a large test chamber. In: Building and Environment, v. 213 (April 2022).
- (2021): Development and evaluation of an automatic steam radiator control system for retrofitting legacy heating systems in existing buildings. In: Energy and Buildings, v. 251 (November 2021).
- (2021): Evaluating a commercially available in-duct bipolar ionization device for pollutant removal and potential byproduct formation. In: Building and Environment, v. 195 (Mai 2021).
- (2020): Assessing ventilation control strategies in underground parking garages. In: Building Simulation, v. 14, n. 3 (Juli 2020).
- (2017): Updated generalized natural gas reciprocating engine part-load performance curves for cogeneration applications. In: Science and Technology for the Built Environment, v. 23, n. 7 (August 2017).
- (2016): Modeling the impact of residential HVAC filtration on indoor particles of outdoor origin (RP-1691). In: Science and Technology for the Built Environment, v. 22, n. 4 (Mai 2016).
- (2015): Building design and operational choices that impact indoor exposures to outdoor particulate matter inside residences. In: Science and Technology for the Built Environment, v. 21, n. 1 (Januar 2015).
- (2011): Using energy audits to investigate the impacts of common air-conditioning design and installation issues on peak power demand and energy consumption in Austin, Texas. In: Energy and Buildings, v. 43, n. 11 (November 2011).
- (2014): The impacts of duct design on life cycle costs of central residential heating and air-conditioning systems. In: Energy and Buildings, v. 82 (Oktober 2014).
- (2015): Modeling the energy and cost impacts of excess static pressure in central forced-air heating and air-conditioning systems in single-family residences in the U.S.. In: Energy and Buildings, v. 107 (November 2015).
- (2018): Pilot study of the vertical variations in outdoor pollutant concentrations and environmental conditions along the height of a tall building. In: Building and Environment, v. 138 (Juni 2018).
- (2018): Development of a nationally representative set of combined building energy and indoor air quality models for U.S. residences. In: Building and Environment, v. 136 (Mai 2018).
- (2016): Ten questions concerning the microbiomes of buildings. In: Building and Environment, v. 109 (November 2016).
- (2016): Open Source Building Science Sensors (OSBSS): A low-cost Arduino-based platform for long-term indoor environmental data collection. In: Building and Environment, v. 100 (Mai 2016).
- (2015): Methods to assess human occupancy and occupant activity in hospital patient rooms. In: Building and Environment, v. 90 (August 2015).
- (2014): Tools to improve built environment data collection for indoor microbial ecology investigations. In: Building and Environment, v. 81 (November 2014).
- (2014): The effects of climbing vegetation on the local microclimate, thermal performance, and air infiltration of four building facade orientations. In: Building and Environment, v. 76 (Juni 2014).
- (2014): Predictions and determinants of size-resolved particle infiltration factors in single-family homes in the U.S.. In: Building and Environment, v. 74 (April 2014).
- (2013): HVAC filtration for controlling infectious airborne disease transmission in indoor environments: Predicting risk reductions and operational costs. In: Building and Environment, v. 70 (Dezember 2013).
- (2013): A model of vegetated exterior facades for evaluation of wall thermal performance. In: Building and Environment, v. 67 (September 2013).
- (2011): Operational characteristics of residential and light-commercial air-conditioning systems in a hot and humid climate zone. In: Building and Environment, v. 46, n. 10 (Oktober 2011).
- (2019): The Effect of Balcony Thermal Breaks on Building Thermal and Energy Performance: Field Experiments and Energy Simulations in Chicago, IL. In: Buildings, v. 9, n. 9 (22 August 2019).
- (2015): Optimizing Whole House Deep Energy Retrofit Packages: A Case Study of Existing Chicago-Area Homes. In: Buildings, v. 5, n. 2 (April 2015).
- (2015): Life-Cycle Energy Implications of Downtown High-Rise vs. Suburban Low-Rise Living: An Overview and Quantitative Case Study for Chicago. In: Buildings, v. 5, n. 3 (Juni 2015).
Structurae kooperiert mit
