0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Keiichiro Sonoda

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Sonoda, Yoshimi / Ishikawa, Nobutaka / Sonoda, Keiichiro / Ohta, Toshiaki (1994): Load Carrying Capacity And Safety Check Of Prestressed Concrete Rock-shed. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1994, n. 495 (Juli 1994).

    https://doi.org/10.2208/jscej.1994.495_83

  2. Sonoda, Keiichiro / Kitoh, Hiroaki (1993): Ultimate Loading Capacities And Failure Modes Of Steel Plate And Concrete Composite Slabs. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1993, n. 471 (Juli 1993).

    https://doi.org/10.2208/jscej.1993.471_85

  3. Sonoda, Keiichiro / Kambayashi, Atsushi (1992): Applicability Of A Rigid Body Spring Model To Impact Problems Of Elastic Bodies. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1992, n. 441 (Januar 1992).

    https://doi.org/10.2208/jscej.1992.147

  4. Sonoda, Keiichiro / Horikawa, Toshio / Kitoh, Hiroaki / Kiso, Shuichiro (1989): Shearing Force On Studs And Punching Shear Load Of A Steel Plate And Concrete Composite Slab. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1989, n. 404 (April 1989).

    https://doi.org/10.2208/jscej.1989.404_249

  5. Sonoda, Keiichiro / Okino, Makoto / Hayashi, Hidenao / Kita, Hiroshi (1988): Reliability Of Epoxy Bonded Steel Plate Method For Repairing Damaged RC Slabs Of Bridge. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1988, n. 398 (Oktober 1988).

    https://doi.org/10.2208/jscej.1988.398_245

  6. Hwang, Rong-Wen / Tanihira, Tsutomu / Sonoda, Keiichiro (1988): Shakedown Analyses Of Two-span Beams And Symmetric Three-span Beams With Consideration Of Bending And Shear. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1988, n. 392 (April 1988).

    https://doi.org/10.2208/jscej.1988.392_23

  7. Sonoda, Keiichiro / Horikawa, Toshio (1988): Low Cycle Fatigue Characteristics Of Bridge Deck RC Slabs Under The Repetition Of Wheel Loads. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1988, n. 390 ( 1988).

    https://doi.org/10.2208/jscej.1988.390_97

  8. Imai, Hirosuke / Sonoda, Keiichiro / Mizumoto, Yoshihisa / Masada, Masakazu (1985): Behavior Of Precast Prestressed Composite Deck Slabs For Highway Bridges. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1985, n. 356 (April 1985).

    https://doi.org/10.2208/jscej.1985.356_565

  9. Sonoda, Keiichiro / Horikawa, Toshio / Kondoh, Tetsuya / Kitoh, Hiroaki (1987): A Method Of Estimation For The Design Moments Of RC Slab Subjected To Concentrated Loads Through A Column. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1987, n. 384 (August 1987).

    https://doi.org/10.2208/jscej.1987.384_73

  10. Sonoda, Keiichiro / Kitoh, Hiroaki / Yanagihara, Yasuo (1995): Ultimate Strength Of The Skin Steel Plates Under Compression In Steel-concrete Sandwich Members. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1995, n. 525 (Oktober 1995).

    https://doi.org/10.2208/jscej.1995.525_39

  11. Sonoda, Keiichiro (1997): Recent Trends Of Composite Constructions In The Civil Engineering Field. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1997, n. 556 (Januar 1997).

    https://doi.org/10.2208/jscej.1997.556_31

  12. Kitoh, Hiroaki / Yamawaki, Manabu / Sonoda, Keiichiro (1998): Load Carrying Mechanism Of Steel-concrete Sandwich Members Under Shear. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1998, n. 591 (April 1998).

    https://doi.org/10.2208/jscej.1998.591_53

  13. Sonoda, Keiichiro / Kitoh, Hiroaki / Nakajima, Kazuo / Uenaka, Kojiro (1998): A Systematic Study On The Shear Transfer Capacities Of Embossed Steel Plates For Composite Construction. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1998, n. 598 (Juli 1998).

    https://doi.org/10.2208/jscej.1998.598_183

  14. Horikawa, Toshio / Kato, Nobuhiko / Hayashi, Hidenao / Sonoda, Keiichiro (1999): Deterioration Process Of RC Slabs On Composite Girder Bridge. Consideration by a wheel tracking test for existing bridge slabs used for about 24 years. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1999, n. 620 ( 1999).

    https://doi.org/10.2208/jscej.1999.620_143

  15. Uenaka, Kojiro / Kitoh, Hiroaki / Sonoda, Keiichiro / Shitomi, Naoki (2000): Open Sandwich Composite Members Consisting Of Concrete And Embossed Steel Plates With Headed Studs Under Bending And Shear. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2000, n. 661 (Oktober 2000).

    https://doi.org/10.2208/jscej.2000.661_107

  16. Kitoh, Hiroaki / Koyabu, Takashi / Sahara, Keisuke / Sonoda, Keiichiro (2004): Concrete Filled Circular Steel Tubular Stubs With A Large Ratio Of Diameter To Thickness Under Compression. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2004, n. 759 (April 2004).

    https://doi.org/10.2208/jscej.2004.759_25

  17. Shoji, Akio / Kondo, Takuya / Osugi, Toshiyuki / Sonoda, Keiichiro (2004): A Study On Panel Point Of A PC Bridge With Steel Truss Webs. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2004, n. 760 (Mai 2004).

    https://doi.org/10.2208/jscej.2004.760_75

  18. Sonoda, Keiichiro / Ebina, Takayuki (2005): Consideration On Concrete Shearing Strength Of Perfobond Rib By Limit Analysis Theorem. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2005, n. 781 ( 2005).

    https://doi.org/10.2208/jscej.2005.781_213

  19. Sonoda, Keiichiro / Ishio, Toshimitsu / Kobayashi, Harutoshi (1978): Circular Plates on Linear Viscoelastic Foundations. In: Journal of the Engineering Mechanics Division (ASCE), v. 104, n. 4 (August 1978).

    https://doi.org/10.1061/jmcea3.0002382

  20. Sonoda, Keiichiro / Kobayashi, Harutoshi (1980): Rectangular Plates on Linear Viscoelastic Foundations. In: Journal of the Engineering Mechanics Division (ASCE), v. 106, n. 2 (April 1980).

    https://doi.org/10.1061/jmcea3.0002587

  21. Kitoh, Hiroaki / Sonoda, Keiichiro (1990): Forces on the studs in a steel plate and concrete slab. Vorgetragen bei: IABSE Symposium: Mixed Structures, including New Materials = Construction mixte acier, béton et nouveaux matériaux = Misch- und Verbundbauweisen einschliesslich neuer Baustoffe, Brussels, Belgium, 1990.

    https://doi.org/10.5169/seals-46460

  22. Sonoda, Keiichiro / Matsui, Shigeyuki / Hayqashi, Hidenao (1990): Epoxy bonded steel plate method for repairing deteriorated slabs. Vorgetragen bei: IABSE Symposium: Mixed Structures, including New Materials = Construction mixte acier, béton et nouveaux matériaux = Misch- und Verbundbauweisen einschliesslich neuer Baustoffe, Brussels, Belgium, 1990.

    https://doi.org/10.5169/seals-46572

  23. Kishi, Norimitsu / Sonoda, Keiichiro / Komuro, Masato / Kawarai, Tomoki (2021): Numerical Simulation of the Daikai Station Subway Structure Collapse due to Sudden Uplift during Earthquake. In: Journal of Engineering Mechanics (ASCE), v. 147, n. 3 (März 2021).

    https://doi.org/10.1061/(asce)em.1943-7889.0001895

  24. Uenaka, Kojiro / Kitoh, Hiroaki / Sonoda, Keiichiro (2010): Concrete filled double skin circular stub columns under compression. In: Thin-Walled Structures, v. 48, n. 1 (Januar 2010).

    https://doi.org/10.1016/j.tws.2009.08.001

  25. Uenaka, Kojiro / Kitoh, Hiroaki / Sonoda, Keiichiro (2008): Concrete filled double skin tubular members subjected to bending. In: Steel and Composite Structures, v. 8, n. 4 (August 2008).

    https://doi.org/10.12989/scs.2008.8.4.297

  26. Kobayashi, Harutoshi / Sonoda, Keiichiro (1990): Buckling of Rectangular Plates with Tapered Thickness. In: Journal of Structural Engineering (ASCE), v. 116, n. 5 (Mai 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:5(1278)

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine