-
Reuland, Yves / Lestuzzi, Pierino / Smith, Ian F. C. (2019): An engineering approach to model-class selection for measurement-supported post-earthquake assessment. In: Engineering Structures, v. 197 (Oktober 2019).
https://doi.org/10.1016/j.engstruct.2019.109408
-
Smith, Ian F. C. (1989): Knowledge-base systems for structures in service. Vorgetragen bei: IABSE Colloquium: Expert Systems in Civil Engineering, Bergamo, Italy, 1989.
https://doi.org/10.5169/seals-44901
-
Smith, Ian F. C. / Shea, Kristina (1999): Extending active control to build intelligent structures. Vorgetragen bei: IABSE Symposium: Structures for the Future - The Search for Quality, Rio de Janeiro, Brazil, 25-27 August 1999.
https://doi.org/10.5169/seals-62939
-
Bertola, Numa J. / Proverbio, Marco / Smith, Ian F. C. (2020): Framework to Approximate the Value of Information of Bridge Load Testing for Reserve Capacity Assessment. In: Frontiers in Built Environment, v. 6 (Januar 2020).
https://doi.org/10.3389/fbuil.2020.00065
-
Reksowardojo, Arka P. / Senatore, Gennaro / Smith, Ian F. C. (2020): Design of Structures That Adapt to Loads through Large Shape Changes. In: Journal of Structural Engineering (ASCE), v. 146, n. 5 (Mai 2020).
https://doi.org/10.1061/(asce)st.1943-541x.0002604
-
Smith, Ian F. C. / Hirt, Manfred A. (1984): Fatigue design concepts. In: IABSE Surveys, v. 8 ( 1984).
https://doi.org/10.5169/seals-48519
-
Vernay, Didier G. / Raphael, Benny / Smith, Ian F. C. (2015): Improving simulation predictions of wind around buildings using measurements through system identification techniques. In: Building and Environment, v. 94 (Dezember 2015).
https://doi.org/10.1016/j.buildenv.2015.10.018
-
Reksowardojo, Arka P. / Senatore, Gennaro / Smith, Ian F. C. (2019): Experimental Testing of a Small-Scale Truss Beam That Adapts to Loads Through Large Shape Changes. In: Frontiers in Built Environment, v. 5 (November 2019).
https://doi.org/10.3389/fbuil.2019.00093
-
Smith, Ian F. C. (2016): Grand Challenges of Structural Sensing. In: Frontiers in Built Environment, v. 1 (Januar 2016).
https://doi.org/10.3389/fbuil.2015.00019
-
Smith, Ian F. C. (2000): Enabling Performance Based Structural Engineering. Vorgetragen bei: IABSE Congress: Structural Engineering for Meeting Urban Transportation Challenges, Lucerne, Switzerland, 18-21 September 2000.
https://doi.org/10.2749/222137900796314383
-
Reuland, Yves / Lestuzzi, Pierino / Smith, Ian F. C. (2019): Measurement-based support for post-earthquake assessment of buildings. In: Structure and Infrastructure Engineering, v. 15, n. 5 (März 2019).
https://doi.org/10.1080/15732479.2019.1569071
-
Moser, Gaudenz / Paal, Stephanie German / Smith, Ian F. C. (2018): Leak Detection of Water Supply Networks Using Error-Domain Model Falsification. In: Journal of Computing in Civil Engineering, v. 32, n. 2 (März 2018).
https://doi.org/10.1061/(asce)cp.1943-5487.0000729
-
Saitta, Sandro / Kripakaran, Prakash / Raphael, Benny / Smith, Ian F. C. (2010): Feature Selection Using Stochastic Search: An Application to System Identification. In: Journal of Computing in Civil Engineering, v. 24, n. 1 (Januar 2010).
https://doi.org/10.1061/(asce)cp.1943-5487.0000003
-
Garrett, James H. / Flood, Ian / Smith, Ian F. C. / Soibelman, Lucio (2004): Information Technology in Civil Engineering—Future Trends. In: Journal of Computing in Civil Engineering, v. 18, n. 3 (Juli 2004).
https://doi.org/10.1061/(asce)0887-3801(2004)18:3(185)
-
Moser, Gaudenz / Paal, Stephanie German / Smith, Ian F. C. (2017): Measurement system design for leak detection in hydraulic pressurized networks. In: Structure and Infrastructure Engineering, v. 13, n. 7 (September 2017).
https://doi.org/10.1080/15732479.2016.1225312
-
Rhode-Barbarigos, Landolf / Bel Hadj Ali, Nizar / Motro, René / Smith, Ian F. C. (2010): Designing tensegrity modules for pedestrian bridges. In: Engineering Structures, v. 32, n. 4 (April 2010).
https://doi.org/10.1016/j.engstruct.2009.12.042
-
Bel Hadj Ali, Nizar / Rhode-Barbarigos, Landolf / Pascual Albi, Alberto A. / Smith, Ian F. C. (2010): Design optimization and dynamic analysis of a tensegrity-based footbridge. In: Engineering Structures, v. 32, n. 11 (November 2010).
https://doi.org/10.1016/j.engstruct.2010.08.009
-
Korkmaz, Sinan / Bel Hadj Ali, Nizar / Smith, Ian F. C. (2011): Determining control strategies for damage tolerance of an active tensegrity structure. In: Engineering Structures, v. 33, n. 6 (Juni 2011).
https://doi.org/10.1016/j.engstruct.2011.02.031
-
Pasquier, Romain / Smith, Ian F. C. (2016): Iterative structural identification framework for evaluation of existing structures. In: Engineering Structures, v. 106 (Januar 2016).
https://doi.org/10.1016/j.engstruct.2015.09.039
-
Sychterz, Ann C. / Smith, Ian F. C. (2017): Joint Friction during Deployment of a Near-Full-Scale Tensegrity Footbridge. In: Journal of Structural Engineering (ASCE), v. 143, n. 9 (September 2017).
https://doi.org/10.1061/(asce)st.1943-541x.0001817
-
Smith, Ian F. C. / Hirt, Manfred A. (1987): Fatigue Reliability: ECCS Safety Factors. In: Journal of Structural Engineering (ASCE), v. 113, n. 3 (März 1987).
https://doi.org/10.1061/(asce)0733-9445(1987)113:3(623)
-
Pasquier, Romain / Goulet, James-A. / Acevedo, Claire / Smith, Ian F. C. (2014): Improving Fatigue Evaluations of Structures Using In-Service Behavior Measurement Data. In: Journal of Bridge Engineering (ASCE), v. 19, n. 11 (November 2014).
https://doi.org/10.1061/(asce)be.1943-5592.0000619
-
Shea, Kristina / Smith, Ian F. C. (2006): Improving Full-Scale Transmission Tower Design through Topology and Shape Optimization. In: Journal of Structural Engineering (ASCE), v. 132, n. 5 (Mai 2006).
https://doi.org/10.1061/(asce)0733-9445(2006)132:5(781)
-
Pasquier, Romain / D'Angelo, Luca / Goulet, James-A. / Acevedo, Claire / Nussbaumer, Alain / Smith, Ian F. C. (2016): Measurement, Data Interpretation, and Uncertainty Propagation for Fatigue Assessments of Structures. In: Journal of Bridge Engineering (ASCE), v. 21, n. 5 (Mai 2016).
https://doi.org/10.1061/(asce)be.1943-5592.0000861
-
Laory, Irwanda / Bel Hadj Ali, Nizar / Trinh, Thanh N. / Smith, Ian F. C. (2012): Measurement System Configuration for Damage Identification of Continuously Monitored Structures. In: Journal of Bridge Engineering (ASCE), v. 17, n. 6 (November 2012).
https://doi.org/10.1061/(asce)be.1943-5592.0000386
-
Reuland, Yves / Garofano, Angelo / Lestuzzi, Pierino / Smith, Ian F. C. (2015): Evaluating seismic retrofitting efficiency through ambient vibration tests and analytical models. Vorgetragen bei: IABSE Conference: Structural Engineering: Providing Solutions to Global Challenges, Geneva, Switzerland, September 2015.
https://doi.org/10.2749/222137815818359168
-
Trinh, Thanh / Smith, Ian F. C. / Brownjohn, James / Laory, Irwanda / Koo, Ki-Young (2011): Effects of Service Loading on the Behaviour of a Suspension Bridge. Vorgetragen bei: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
-
Fest, E. / Smith, Ian F. C. (2002): Deux structures actives de type tenségrité. In: Construction Métallique, n. 3 ( 2002).
-
Bremen, U. / Hirt, M. A. / Smith, Ian F. C. (1988): Effet de contraintes résiduelles sur le comportement de fissures de fatigue dans un assemblage soudé et traité. In: Construction Métallique, n. 2 ( 1988).
-
Smith, Ian F. C. (2001): Increasing Knowledge of Structural Performance. In: Structural Engineering International, v. 11, n. 3 (August 2001).
https://doi.org/10.2749/101686601780346931