Vute Sirivivatnanon 
- : Sustainable concrete structures by optimising structural and concrete mix design. In: Australian Journal of Structural Engineering.
- (2023): Long-term reinforcement corrosion in low carbon concrete with a high volume of SCMs exposed to NaCl solutions and field marine environment. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Reliability of AMBT and CPT in testing the effectiveness of SCM to mitigate alkali–silica reaction of field concrete. In: Construction and Building Materials, v. 369 (März 2023).
- (2021): Evaluating the impact of curing temperature in delayed ettringite formation using electrochemical impedance spectroscopy. In: Construction and Building Materials, v. 282 (Mai 2021).
- (2023): Comparative study of the efficacy of fly ash and reactive aggregate powders in mitigating alkali-silica reaction. In: Journal of Building Engineering, v. 63 (Januar 2023).
- (2023): Non-expansive delayed ettringite formation in low sulphate and low alkali cement mortars. In: Australian Journal of Civil Engineering, v. 21, n. 1 ( 2023).
- (2022): Chloride induced corrosion of steel reinforcement in alkali activated slag concretes: A critical review. In: Case Studies in Construction Materials, v. 16 (Juni 2022).
- (2022): Mechanisms of Alkali-Silica Reaction Mitigation in AMBT Conditions: Comparative Study of Traditional Supplementary Cementitious Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 3 (März 2022).
- (2021): Influence of Limestone Mineral Addition in Cements on the Efficacy of SCMs in Mitigating Alkali-Silica Reaction Assessed by Accelerated Mortar Bar Test. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 6 (Juni 2021).
- (2015): Constraints in Using Manufactured Sands in Concrete Pavements in Australia. In: Journal of Civil Engineering and Architecture, v. 9, n. 11 (November 2015).
- (2019): The effect of fly ash fineness on heat of hydration, microstructure, flow and compressive strength of blended cement pastes. In: Case Studies in Construction Materials, v. 10 (Juni 2019).
- (2021): Accelerated test for assessing the potential risk of alkali-silica reaction in concrete using an autoclave. In: Construction and Building Materials, v. 271 (Februar 2021).
- (2017): Elasto-plastic damage modelling of beams and columns with mechanical degradation. In: Computers and Concrete, v. 19, n. 3 (März 2017).
- (2016): Calibration of Australian Standard AS3600 concrete structures part II: reliability indices and changes to capacity reduction factors. In: Australian Journal of Structural Engineering, v. 17, n. 4 (Dezember 2016).
- (2016): Calibration of Australian Standard AS3600 Concrete Structures: part I statistical analysis of material properties and model error. In: Australian Journal of Structural Engineering, v. 17, n. 4 (Dezember 2016).
- (2002): Compliance Acceptance of Concrete Drying Shrinkage. In: Australian Journal of Structural Engineering, v. 3, n. 3 ( 2002).
- (2008): Effect of carbon dioxide on chloride penetration and chloride ion diffusion coefficient of blended Portland cement mortar. In: Construction and Building Materials, v. 22, n. 8 (August 2008).
- (2016): Reliability of new Australian test methods in predicting alkali silica reaction of field concrete. In: Construction and Building Materials, v. 126 (November 2016).
Structurae kooperiert mit
