Amardeep Singh 
- : Crack analysis of tall concrete wind towers using an ad-hoc deep multiscale encoder–decoder with depth separable convolutions under severely imbalanced data. In: Structural Health Monitoring.
- (2024): Review on Solid Wastes Incorporated Cementitious Material using 3D Concrete Printing Technology. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Utilizing CO2 to improve plastic shrinkage and mechanical properties of 3D printed mortar made with recycled fine aggregates. In: Construction and Building Materials, v. 433 (Juni 2024).
- (2024): Analyzing the effects of size and density on the ultimate compressive strength of structural laminated bamboo parallel to the grain. In: Journal of Building Engineering, v. 90 (August 2024).
- (2024): Sustainable use of ultrafine recycled glass in additive manufactured (3D printed) reactive powder concrete. In: Construction and Building Materials, v. 419 (März 2024).
- (2024): Experimental Study on the Flexural Behavior of I-Shaped Laminated Bamboo Composite Beam as Sustainable Structural Element. In: Buildings, v. 14, n. 3 (21 Februar 2024).
- (2023): A case study on examining the fresh-state behavior of self-compacting mortar containing waste powders from various sources. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): Development of low-carbon materials from GGBS and clay brick powder for 3D concrete printing. In: Construction and Building Materials, v. 383 (Juni 2023).
- (2023): Utilization of antimony tailings in fiber-reinforced 3D printed concrete: A sustainable approach for construction materials. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2024): Effects of varied building solid wastes, particle sizes and substitution ratios on the performance and impedance spectrum of recycled fine aggregate mortar and the feasibility of developing a prediction method. In: Journal of Building Engineering, v. 83 (April 2024).
- (2023): Use of recycled fine aggregates and recycled powders in sustainable recycled concrete. In: Journal of Building Engineering, v. 77 (Oktober 2023).
- (2023): Development and Characteristic of 3D-Printable Mortar with Waste Glass Powder. In: Buildings, v. 13, n. 6 (23 Mai 2023).
- (2023): Enhancement of 3D printed cementitious composite by short fibers: A review. In: Construction and Building Materials, v. 362 (Januar 2023).
- (2022): Review on computer vision-based crack detection and quantification methodologies for civil structures. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Effect of metakaolin on the fresh and hardened properties of 3D printed cementitious composite. In: Construction and Building Materials, v. 350 (Oktober 2022).
- (2022): Sustainable use of different size fractions of municipal solid waste incinerator bottom ash and recycled fine aggregates in cement mortar. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2023): Mechanical behavior of Glass fiber‐reinforced polymer ‐timber‐steel tube‐concrete composite columns under axial compression. In: Structural Concrete, v. 24, n. 1 (Februar 2023).
- (2022): Mechanical and macrostructural properties of 3D printed concrete dosed with steel fibers under different loading direction. In: Construction and Building Materials, v. 323 (März 2022).
- (2021): Quantification of plastic shrinkage and cracking in mortars containing different recycled powders using digital image correlation technique. In: Construction and Building Materials, v. 293 (Juli 2021).
- (2022): Evaluation of compressive strength using novel in situ test method. In: Structural Concrete, v. 23, n. 5 (Oktober 2022).
- (2022): Effect of Fiber Volume Fraction of Waste Originated Tire Fiber and w/c Ratio on Mechanical Properties of Functionally Graded Concrete. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 46, n. 4 (Mai 2022).
- (2021): Influence of crack on the damping properties of recycled concrete. In: Construction and Building Materials, v. 311 (Dezember 2021).
- (2021): Influence of new‐to‐old concrete interface on the damping behavior of recycled aggregate concrete. In: Structural Concrete, v. 22, n. 5 (September 2021).
- (2021): Strength index analysis of concrete with large size recycled aggregate based on back propagation neural network. In: Advances in Structural Engineering, v. 25, n. 1 (Oktober 2021).
- (2003): Impact of Annual Average Daily Traffic on Highway Runoff Pollutant Concentrations. In: Journal of Environmental Engineering (ASCE), v. 129, n. 11 (November 2003).
- (2020): Improvement on the properties of waste glass mortar with nanomaterials. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Combined use of recycled powder and recycled coarse aggregate derived from construction and demolition waste in self-compacting concrete. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Utilization potential of aerated concrete block powder and clay brick powder from C&D waste. In: Construction and Building Materials, v. 238 (März 2020).
- (2020): Rheological properties of mortar containing recycled powders from construction and demolition wastes. In: Construction and Building Materials, v. 237 (März 2020).
- (2019): Correlation between damage evolution and resistivity reaction of concrete in-filled with graphene nanoplatelets. In: Construction and Building Materials, v. 208 (Mai 2019).
Structurae kooperiert mit
