Pawel Sikora 
- (2024): Comparative analysis of ternary blended cement with clay and engineering brick aggregate for high-performance 3D printing. In: Developments in the Built Environment, v. 20 (Dezember 2024).
- : Medieval and Restoration Bricks: Water Transport (Hygric) and Microstructural Properties – A Compatibility Study. In: International Journal of Architectural Heritage.
- (2024): Advances in using seawater in slag-containing cement systems. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Alkali-activated cements as sustainable materials for repairing building construction: a review. In: Journal of Building Engineering, v. 90 (August 2024).
- (2024): The effect of interlayer adhesion on stress distribution in 3D printed beam elements. In: Journal of Building Engineering, v. 87 (Juni 2024).
- (2023): Understanding the role of andesite igneous rock in enhancing the performance of alkali-activated ultrafine slag exposed to normal and elevated temperatures. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Recycled brick aggregates in one-part alkali-activated materials: Impact on 3D printing performance and material properties. In: Developments in the Built Environment, v. 16 (Dezember 2023).
- (2023): From dolomite waste to katoite-based binder: Synthesis, performance and characterization. In: Journal of Building Engineering, v. 75 (September 2023).
- (2023): Towards development of sustainable lightweight 3D printed wall building envelopes – Experimental and numerical studies. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2022): Insight into the microstructural and durability characteristics of 3D printed concrete: Cast versus printed specimens. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Preparation and characterization of a novel alkali-activated magnesite cement. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Resistance of alkali-activated slag mixed with wastewater towards biogenic sulfuric acid attack. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2021): Evaluation of the effects of bismuth oxide (Bi2O3) micro and nanoparticles on the mechanical, microstructural and γ-ray/neutron shielding properties of Portland cement pastes. In: Construction and Building Materials, v. 284 (Mai 2021).
- (2021): The effects of nanosilica on the fresh and hardened properties of 3D printable mortars. In: Construction and Building Materials, v. 281 (April 2021).
- (2021): 3D printable lightweight cementitious composites with incorporated waste glass aggregates and expanded microspheres – rheological, thermal and mechanical properties. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): Thermal performance of building envelopes with structural layers of the same density: Lightweight aggregate concrete versus foamed concrete. In: Building and Environment, v. 196 (Juni 2021).
- (2020): Evaluating the effects of nanosilica on the material properties of lightweight and ultra-lightweight concrete using image-based approaches. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2019): Comparison of lightweight aggregate and foamed concrete with the same density level using image-based characterizations. In: Construction and Building Materials, v. 211 (Juni 2019).
- (2019): Incorporation of magnetite powder as a cement additive for improving thermal resistance and gamma-ray shielding properties of cement-based composites. In: Construction and Building Materials, v. 204 (April 2019).
- (2014): Effect of incorporation route on dispersion of mesoporous silica nanospheres in cement mortar. In: Construction and Building Materials, v. 66 (September 2014).
- (2017): The effect of elevated temperature on the properties of cement mortars containing nanosilica and heavyweight aggregates. In: Construction and Building Materials, v. 137 (April 2017).
- (2017): The effects of silica/titania nanocomposite on the mechanical and bactericidal properties of cement mortars. In: Construction and Building Materials, v. 150 (September 2017).
- (2018): The effects of Fe 3 O 4 and Fe 3 O 4 /SiO 2 nanoparticles on the mechanical properties of cement mortars exposed to elevated temperatures. In: Construction and Building Materials, v. 182 (September 2018).
Structurae kooperiert mit
