Kyung-Jae Shin 
- (2024): Experimental and Analytical Study on Non-Damaged Reinforcement Method for Pipe Rack Steel Structures. In: Buildings, v. 14, n. 9 (25 August 2024).
- (2024): Evaluation of fire-resistance performance for modular structures based on fireproof coating types. In: Structures, v. 67 (September 2024).
- : Strength Evaluation of Flush End-Plate Connection Using Triangular Haunch in Pipe Rack. In: International Journal of Steel Structures.
- (2024): Dynamic response of RC frames retrofitted with friction-damped brace system through shaking table tests. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): Shear strength evaluation of steel beams with partially corrugated web. In: Journal of Constructional Steel Research, v. 211 (Dezember 2023).
- (2023): Flexural behavior of large-scale U-shaped steel-concrete infilled composite beams with flat and embossed webs. In: Structures, v. 55 (September 2023).
- (2023): Design Methodology of U-Shaped Infilled Composite Beams with Angled Shear Connectors Using Finite Element Analysis. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2023): Strength Evaluation of End-Plate Connections Using Stiffness Reduction Factor. In: International Journal of Steel Structures, v. 23, n. 3 (4 April 2023).
- (2022): The Measurement of Construction Error Technology for Deformable Modular System by Image Processing. In: International Journal of Steel Structures, v. 22, n. 6 (21 September 2022).
- (2021): Structural Performance Evaluation of Modular Connections Using Developed Blocks. In: International Journal of Steel Structures, v. 21, n. 4 (15 Juli 2021).
- (2021): Design Procedure and Ultimate Capacity of New Turnbuckle for Measuring Tensile Force. In: International Journal of Steel Structures, v. 21, n. 2 (März 2021).
- (2020): Strength Evaluation of Angle Type Shear Connectors in Composite Beams. In: International Journal of Steel Structures, v. 20, n. 6 ( 2020).
- (2020): ABAQUS modeling for post-tensioned reinforced concrete beams. In: Journal of Building Engineering, v. 30 (Juli 2020).
- (2019): Push-out 실험을 통한 앵글형 전단연결재의 내력 평가 (Push-out Test on Evaluation of Shear Strength Using Angle Shear Connectors). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 31, n. 6 (31 Dezember 2019).
- (2017): Gust Effect Factor for Wind Load Estimation of Tree Supporting Systems. In: Journal of Asian Architecture and Building Engineering, v. 16, n. 3 (September 2017).
- (2018): 구조 강재의 온도에 따른 재료적 특성에 대한 실험적 연구 (Mechanical Properties of Structural Steel at Elevated Temperature). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 30, n. 5 (Oktober 2018).
- (2012): 고강도 원형강관의 직각방향 거셋플레이트 접합부 실험 및 해석 (Test and Analysis on the Transverse Gusset Plate Connection to Circular Hollow Section(CHS) of High Strength). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 24, n. 2 (April 2012).
- (2012): 고강도 원형강관의 길이방향 거셋플레이트 접합부 실험 및 해석 (Test and Analysis on the Longitudinal Gusset Plate Connection to Circular Hollow Section (CHS) of High Strength). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 24, n. 1 (Februar 2012).
- (2018): 고온에서의 엔드플레이트 접합부를 가진 H형강 보 거동에 관한 실험적 연구 (Experimental Study on Behavior of H-Beam with End-plate Connection at High Temperature). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 30, n. 4 (August 2018).
- (2018): Shaking Table Test and Analysis of Reinforced Concrete Frame with Steel Shear Wall with Circular Opening and Slit Damper. In: International Journal of Steel Structures, v. 18, n. 4 ( 2018).
- (2008): Seismic behaviour of composite concrete-filled tube column-to-beam moment connections. In: Journal of Constructional Steel Research, v. 64, n. 1 (Januar 2008).
- (2016): Experimental investigation of beam-to-column connection with SHN490 steel under cyclic loading. In: International Journal of Steel Structures, v. 16, n. 4 ( 2016).
- (2015): Strength equations of longitudinal plate-to-circular hollow section (CHS) joints. In: International Journal of Steel Structures, v. 15, n. 2 ( 2015).
- (2012): Behavior of plate-to-circular hollow section joints of 600 MPa high-strength steel. In: International Journal of Steel Structures, v. 12, n. 4 ( 2012).
- (2013): Experimental Investigation of Composite Moment Connections with External Stiffeners. In: Advances in Structural Engineering, v. 16, n. 10 (Oktober 2013).
- (2012): Flexural Analysis of Full-Scale RC Beam Strengthened with Steel Rods. In: Advances in Structural Engineering, v. 15, n. 12 (Dezember 2012).
- (2001): Hysteresis behavior of CFT column to H-beam connections with external T-stiffeners and penetrated elements. In: Engineering Structures, v. 23, n. 9 (September 2001).
- (2004): Behavior of welded CFT column to H-beam connections with external stiffeners. In: Engineering Structures, v. 26, n. 13 (November 2004).
- (2014): External Posttensioning of Reinforced Concrete Beams Using a V-Shaped Steel Rod System. In: Journal of Structural Engineering (ASCE), v. 140, n. 3 (März 2014).
- (2014): Shear strengthening of continuous concrete beams using externally prestressed steel bars. In: PCI Journal, v. 59, n. 4 (September 2014).
Structurae kooperiert mit
