Andy Shea
- (2023): Hygrothermal transfers through a bio-based multilayered wall: Modeling study of different wall configurations subjected to various climates and indoor cyclic loads. In: Journal of Building Physics, v. 46, n. 4 (Januar 2023).
- (2021): The moisture buffering performance of plasters when exposed to simultaneous sinusoidal temperature and RH variations. In: Journal of Building Engineering, v. 34 (Februar 2021).
- (2013): Evaluation of the thermal performance of an innovative prefabricated natural plant fibre building system. In: Building Services Engineering Research and Technology, v. 34, n. 4 (Oktober 2013).
- (2014): The use of Passive House Planning Package to reduce energy use and CO2 emissions in historic dwellings. In: Energy and Buildings, v. 75 (Juni 2014).
- (2020): Comparison of moisture buffering properties of plasters in full scale simulations and laboratory testing. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Energy retrofit infill panels for historic timber-framed buildings in the UK: physical test panel monitoring versus hygrothermal simulation. In: Architectural Science Review, v. 64, n. 1-2 (Oktober 2020).
- (2018): Heat and moisture transfer behaviour in Phyllostachys edulis (Moso bamboo) based panels. In: Construction and Building Materials, v. 166 (März 2018).
- (2016): In situ assessment of the fabric and energy performance of five conventional and non-conventional wall systems using comparative coheating tests. In: Building and Environment, v. 109 (November 2016).
- (2015): Moisture buffer potential of experimental wall assemblies incorporating formulated hemp-lime. In: Building and Environment, v. 93 (November 2015).
- (2014): Conditions affecting the moisture buffering measurement performed on compressed earth blocks. In: Building and Environment, v. 75 (Mai 2014).
- (2019): A review of moisture buffering capacity: From laboratory testing to full-scale measurement. In: Construction and Building Materials, v. 200 (März 2019).
- (2012): Hygrothermal performance of an experimental hemp–lime building. In: Construction and Building Materials, v. 36 (November 2012).
- (2015): Density distribution profile for internodes and nodes of Phyllostachys edulis (Moso bamboo) by computer tomography scanning. In: Construction and Building Materials, v. 93 (September 2015).
- (2016): Specific heat capacity measurement of Phyllostachys edulis (Moso bamboo) by differential scanning calorimetry. In: Construction and Building Materials, v. 125 (Oktober 2016).
- (2013): Hygrothermal performance of bio-based insulation materials. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 166, n. 4 (August 2013).
Structurae kooperiert mit
