Akanshu Sharma 
- (2023): Gap filler to eliminate the hole play between base plate and channel bolts installed in anchor channels to sustain higher seismic loads. Vorgetragen bei: IABSE Congress: Engineering for Sustainable Development, New Delhi, India, 20-22 September 2023.
- (2023): An assessment method to ensure applicability of concrete capacity method for design of anchorages: Linear force distribution approach. In: Structural Concrete, v. 24, n. 6 (2 November 2023).
- (2023): Detailed 3D FE modeling approach for 2D and 3D beam-column joints retrofitted with fully fastened haunch retrofit solution including anchor behavior. In: Engineering Structures, v. 294 (November 2023).
- (2023): Behaviour of single bonded anchors in uncracked steel fibre reinforced concrete under tensile loading – Experimental investigations and analytical model. In: Engineering Structures, v. 288 (August 2023).
- (2023): Cast-in and post-installed rebar anchorage systems in RC column foundation joints: System specific assessment and design. In: Engineering Structures, v. 276 (Februar 2023).
- : A lumped plasticity model for corrosion damaged reinforced concrete columns. In: Proceedings of the Institution of Civil Engineers - Bridge Engineering.
- (2022): Bonded anchors with post-installed supplementary reinforcement under tension loading – Experimental investigations. In: Engineering Structures, v. 252 (Februar 2022).
- (2021): Concrete cone breakout behavior of anchor groups in uncracked concrete under displacement-controlled cyclic tension load. In: Engineering Structures, v. 246 (November 2021).
- (2021): Behaviour of single bonded anchors in non-cracked and cracked steel fiber reinforced concrete under short-time tensile loading. In: Engineering Structures, v. 245 (Oktober 2021).
- (2021): Cast-in and post-installed rebar anchorage systems in RC column foundation joints: Experimental investigations. In: Engineering Structures, v. 238 (Juli 2021).
- (2021): Integration of FRP sheet as internal reinforcement in reinforced concrete beam-column joints exposed to sulfate damaged. In: Structures, v. 31 (Juni 2021).
- (2019): Bemessung von zugbeanspruchten Befestigungen in Beton mit einem nicht-linearen Federmodell- Hintergrund und Softwarelösung für die Versagensart Betonausbruch/A non-linear spring model for design of tension loaded anchorages in concrete- Background and software solution for concrete cone failure. In: Bauingenieur, v. 94, n. 9 (September 2019).
- (2010): Experiments on reinforced concrete beam-column joints under cyclic loads and evaluating their response by nonlinear static pushover analysis. In: Structural Engineering and Mechanics, v. 35, n. 1 (Mai 2010).
- (2011): Experimental and analytical investigation on seismic behavior of RC framed structure by pushover method. In: Structural Engineering and Mechanics, v. 39, n. 1 (Juli 2011).
- (2019): Experimental and finite element studies on the flexural behavior of reinforced concrete elements strengthened with hybrid FRP technique. In: Composite Structures, v. 208 (Januar 2019).
- (2020): Experimental investigations on the concrete edge failure of shear loaded anchor groups of rectangular and non-rectangular configurations. In: Engineering Structures, v. 222 (November 2020).
- (2019): Experimental investigations on hybrid strengthening of short reinforced concrete column elements under eccentric compression. In: Structural Concrete, v. 20, n. 6 (Dezember 2019).
- (2020): Experimental and numerical studies on masonry after exposure to elevated temperatures. In: Construction and Building Materials, v. 230 (Januar 2020).
- (2019): Experimental Investigation of the Effectiveness of Hybrid FRP–Strengthened RC Columns on Axial Compression–Bending Interaction Behavior. In: Journal of Composites for Construction, v. 23, n. 4 (August 2019).
- (2019): Experimental and Numerical Studies on Effectiveness of Hybrid FRP Strengthening on Behavior of RC Columns under High Eccentric Compression. In: Journal of Bridge Engineering (ASCE), v. 24, n. 6 (Juni 2019).
- (2019): Experimental investigations on residual bond performance in concrete subjected to elevated temperature. In: Engineering Structures, v. 187 (Mai 2019).
- (2019): Experimental investigations on concrete cone failure of rectangular and non-rectangular anchor groups. In: Engineering Structures, v. 188 (Juni 2019).
- (2016): Influence of Tension Loading Protocol on Crack Cycling Tests on Undercut Anchors. In: ACI Structural Journal, v. 113, n. 4 (Juli 2016).
- (2017): Komponentenmethode für die Beschreibung der Interaktion von Rohrleitungen und Bauwerk. In: ce/papers, v. 1, n. 5-6 (Dezember 2017).
- (2019): Axial compression–bending interaction behavior of severely damaged RC columns rapid repaired and strengthened using hybrid FRP composites. In: Construction and Building Materials, v. 195 (Januar 2019).
- (2019): Anchorage in steel fiber reinforced concrete – concept, experimental evidence and design recommendations for concrete cone and concrete edge breakout failure modes. In: Engineering Structures, v. 181 (Februar 2019).
- (2014): 3D numerical analysis of reinforced concrete beams exposed to elevated temperature. In: Engineering Structures, v. 58 (Januar 2014).
- (2014): Influence of high loading rates on behavior of reinforced concrete beams with different aspect ratios – A numerical study. In: Engineering Structures, v. 79 (November 2014).
- (2017): Experimental investigation of concrete edge failure of multiple-row anchorages with supplementary reinforcement. In: Structural Concrete, v. 18, n. 1 (Februar 2017).
- (2018): coupled thermo-mechanical inelastic analysis approach for reinforced concrete flexural members during fire. In: Structural Concrete, v. 19, n. 4 (August 2018).
Structurae kooperiert mit
