0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Sivaganesh Selvaraj ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2022): Design of Cold-formed Steel Built-Up Closed Section Columns using Direct Strength Method. In: Thin-Walled Structures, v. 171 (Februar 2022).

    https://doi.org/10.1016/j.tws.2021.108746

  2. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2016): Enhancing the structural performance of steel channel sections by CFRP strengthening. In: Thin-Walled Structures, v. 108 (November 2016).

    https://doi.org/10.1016/j.tws.2016.08.005

  3. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2021): Design of cold-formed steel built-up columns subjected to local-global interactive buckling using direct strength method. In: Thin-Walled Structures, v. 159 (Februar 2021).

    https://doi.org/10.1016/j.tws.2020.107305

  4. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2022): Experimental investigation and design considerations on cold-formed steel built-up​ I-section columns subjected to interactive buckling modes. In: Thin-Walled Structures, v. 175 (Juni 2022).

    https://doi.org/10.1016/j.tws.2022.109262

  5. Jeyabalan, Aswin Kumar / Selvaraj, Sivaganesh / Chan, Tak‐Ming (2023): Directly Reusable Steel Column Base Connection ‐ Concept and Numerical investigation. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2419

  6. Selvaraj, Sivaganesh / Chan, Tak-Ming (2024): Recommendations for Implementing Circular Economy in Construction: Direct Reuse of Steel Structures. In: Journal of Constructional Steel Research, v. 214 (März 2024).

    https://doi.org/10.1016/j.jcsr.2023.108439

  7. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2024): Direct Stiffness–Strength Method: An Alternative Design Approach to AISI for Sheathed Cold-Formed Steel Z-Section Structural Members Subjected to Bending. In: Journal of Structural Engineering (ASCE), v. 150, n. 4 (April 2024).

    https://doi.org/10.1061/jsendh.steng-12340

  8. Chobe, Gaurav / Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2023): Numerical Study on Retrofitting of Hot Rolled Steel Beams with Cold-formed Steel Encased Channels-Design Concept using Machine Learning Method. In: Engineering Structures, v. 297 (Dezember 2023).

    https://doi.org/10.1016/j.engstruct.2023.116972

  9. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2023): Proposal to Improve AISI S100 DSM Design Standards for Cold-Formed Steel Built-Up Closed Cross-Section Columns Subjected to Local–Global Interaction Buckling. In: Journal of Structural Engineering (ASCE), v. 149, n. 10 (Oktober 2023).

    https://doi.org/10.1061/jsendh.steng-11916

  10. Nguyen, T. T. / Selvaraj, Sivaganesh / Chan, T.-M. / Mottram, J. T. (2023): Influence of combined imperfections on lateral-torsional buckling behaviour of pultruded FRP beams. In: Composite Structures, v. 304 (Januar 2023).

    https://doi.org/10.1016/j.compstruct.2022.116385

  11. Selvaraj, Sivaganesh / Chan, Tak-Ming / Young, Ben (2023): Influence of geometry on failure modes of PFRP single bolted connections. In: Engineering Structures, v. 274 (Januar 2023).

    https://doi.org/10.1016/j.engstruct.2022.115078

  12. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2021): Direct Strength Approach for Local Buckling of Cold-Formed Steel Built-Up Beams with Slender Unstiffened Flange Elements. In: Practice Periodical on Structural Design and Construction, v. 26, n. 3 (August 2021).

    https://doi.org/10.1061/(asce)sc.1943-5576.0000599

  13. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2021): Design of Cold-Formed Steel Back-To-Back Connected Built-up Beams. In: Journal of Constructional Steel Research, v. 181 (Juni 2021).

    https://doi.org/10.1016/j.jcsr.2021.106623

  14. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2021): Criteria for Selection of Sheathing Boards in Cold-Formed Steel Wall Panels Subjected to Bending: Construction Applications and Performance-Based Evaluation. In: Practice Periodical on Structural Design and Construction, v. 26, n. 1 (Februar 2021).

    https://doi.org/10.1061/(asce)sc.1943-5576.0000527

  15. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2020): Influence of Sheathing-Fastener Connection Stiffness on the Design Strength of Cold-Formed Steel Wall Panels. In: Journal of Structural Engineering (ASCE), v. 146, n. 10 (Oktober 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002709

  16. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2020): Recommendations for design of sheathing bracing systems for slender cold-formed steel structural members. In: Journal of Constructional Steel Research, v. 170 (Juli 2020).

    https://doi.org/10.1016/j.jcsr.2020.106116

  17. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2020): Design of Steel Beams Strengthened with Low-Modulus CFRP Laminates. In: Journal of Composites for Construction, v. 24, n. 1 (Februar 2020).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000983

  18. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Flexural Behaviour and Design of Cold-Formed Steel Wall Panels Sheathed with Particle Cement Board. In: Journal of Constructional Steel Research, v. 162 (November 2019).

    https://doi.org/10.1016/j.jcsr.2019.105723

  19. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Behaviour of Gypsum Sheathed Point-symmetric Cold-formed Steel members: Assessment of AISI Design Method. In: Structures, v. 22 (Dezember 2019).

    https://doi.org/10.1016/j.istruc.2019.06.005

  20. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Investigation on sheathing-fastener connection failures in cold-formed steel wall panels. In: Structures, v. 20 (August 2019).

    https://doi.org/10.1016/j.istruc.2019.03.007

  21. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Bracing effect of sheathing in point-symmetric cold-formed steel flexural members. In: Journal of Constructional Steel Research, v. 157 (Juni 2019).

    https://doi.org/10.1016/j.jcsr.2019.02.037

  22. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar / Dongre, Saurabh Uttamrao (2016): Experimental Studies on Strength and Stiffness Enhancement in CFRP-Strengthened Structural Steel Channel Sections under Flexure. In: Journal of Composites for Construction, v. 20, n. 6 (Dezember 2016).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000700

  23. Madhavan, Mahendrakumar / Sanap, Vishwanath / Verma, Riteshkumar / Selvaraj, Sivaganesh (2016): Flexural Strengthening of Structural Steel Angle Sections Using CFRP: Experimental Investigation. In: Journal of Composites for Construction, v. 20, n. 1 (Februar 2016).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000578

  24. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2018): Retrofitting of Structural Steel Channel Sections Using Cold-Formed Steel Encasing Channels. In: Journal of Performance of Constructed Facilities (ASCE), v. 32, n. 4 (August 2018).

    https://doi.org/10.1061/(asce)cf.1943-5509.0001187

  25. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2017): CFRP strengthened steel beams: Improvement in failure modes and performance analysis. In: Structures, v. 12 (November 2017).

    https://doi.org/10.1016/j.istruc.2017.08.008

  26. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2018): Geometric Imperfection Measurements and Validations on Cold-Formed Steel Channels Using 3D Noncontact Laser Scanner. In: Journal of Structural Engineering (ASCE), v. 144, n. 3 (März 2018).

    https://doi.org/10.1061/(asce)st.1943-541x.0001993

  27. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Improvements in AISI Design Methods for Gypsum-Sheathed Cold-Formed Steel Wall Panels Subjected to Bending. In: Journal of Structural Engineering (ASCE), v. 145, n. 2 (Februar 2019).

    https://doi.org/10.1061/(asce)st.1943-541x.0002223

  28. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2017): 07.24: Behaviour of gypsum sheathed cold-formed steel stud walls under lateral loadings. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.214

  29. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2017): 07.19: Geometric imperfection measurements on cold-formed steel channels: An approach using 3D non-contact laser scanner. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.209

  30. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar / Gopalan, Anadh Gopal Venu / Jayabalan, Aswin Kumar / Arumugam, Pavan Kumar (2017): 21.12: Behaviour of CFS strengthened hot-rolled structural steel beams under flexure. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.520

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine