Jens Schneider 
- : Appearance and prevalence of float glass inclusions with a diameter smaller than 500 µm, focused on the identification of nickel sulphide. In: Glass Structures & Engineering.
- (2021): Distortional‐dilatational strain failure mode concept for hyperelastic materials. In: ce/papers, v. 4, n. 6 (Dezember 2021).
- (2023): Determination of the bending strength of glass via four point bending: correction of factor ke in EN1288-3. In: Glass Structures & Engineering, v. 8, n. 3 (Oktober 2023).
- (2023): Effect of moisture on the delamination properties of fractured PVB-laminated glass: A joint experimental and numerical study. In: Composite Structures, v. 322 (Oktober 2023).
- (2022): Challenging glass: the sequel. In: Glass Structures & Engineering, v. 7, n. 3 (22 September 2022).
- (2022): The clamp bender: a new testing equipment for thin glass. In: Glass Structures & Engineering, v. 7, n. 2 (August 2022).
- (2021): Compressive zone depth of thermally tempered glass. In: Construction and Building Materials, v. 310 (Dezember 2021).
- (2022): Bearing-strength of paper laminates in single bolt connections. In: Construction and Building Materials, v. 323 (März 2022).
- (2022): Automated quality control of vacuum insulated glazing by convolutional neural network image classification. In: Automation in Construction, v. 135 (März 2022).
- (2019): The Design of an Ultra-Transparent Funicular Glass Structure. Vorgetragen bei: Structures Congress 2019, Orlando, Florida, 24-27 April 2019.
- (2019): Adhesively bonded glass-metal façade elements with composite structural behaviour under in-plane and out-of-plane loading. In: Engineering Structures, v. 200 (Dezember 2019).
- (2021): Energieeffizienz weitergedacht: die thermisch aktivierte Gebäudehülle als Teil einer Prozesskette. In: Bautechnik, v. 98, n. 1 (Januar 2021).
- (2020): Challenging glass in challenging times. In: Glass Structures & Engineering, v. 5, n. 3 (November 2020).
- (2020): Double ring bending tests on heat pretreated soda–lime silicate glass. In: Glass Structures & Engineering, v. 5, n. 3 (November 2020).
- (2020): Cut edge of annealed float glass: crack system and possibilities to increase the edge strength by adjusting the cutting process. In: Glass Structures & Engineering, v. 5, n. 1 (17 Februar 2020).
- (2018): Crack nucleation in hyperelastic adhesive bonds. In: ce/papers, v. 2, n. 5-6 (Oktober 2018).
- (2017): Comparison of Unconventional Testing Methods for Mechanical Characterization of Polymeric Materials in Modern Glass Structures. Vorgetragen bei: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2008): DIN 18008 – Glas im Bauwesen – Bemessungs- und Konstruktionsregeln. In: Stahlbau, v. 77 (März 2008).
- (2014): Aviary: Interaktive Lichtstelen in Dubai - Tragfähigkeit bei stoßartiger Beanspruchung. In: Stahlbau, v. 83 (April 2014).
- (2016): Aspekte experimenteller und numerischer Untersuchungen von Klemmhalterungen im Glasbau. In: Stahlbau, v. 85 (April 2016).
- (2016): Einfluss von Bauwerksverformungen auf Fassadenkonstruktionen aus Glas am Beispiel der ETA-Fabrik. In: Stahlbau, v. 85 (April 2016).
- (2018): Doppelringbiegeversuche an Glasplatten aus Kalk-Natron-Silikatglas bei erhöhten Temperaturen bis in den Transformationsbereich. In: ce/papers, v. 2, n. 1 (Mai 2018).
- (2017): Biaxially curved glass with large radii—determination of strength using the coaxial double ring test. In: Glass Structures & Engineering, v. 2, n. 2 (Oktober 2017).
- (2018): Adhesive connections in glass structures—part I: experiments and analytics on thin structural silicone. In: Glass Structures & Engineering, v. 3, n. 1 (Februar 2018).
- (2018): Adhesive connections in glass structures—part II: material parameter identification on thin structural silicone. In: Glass Structures & Engineering, v. 3, n. 1 (Februar 2018).
- (2017): Additive Manufacturing for the Built Environment. Vorgetragen bei: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
- (2017): Cold-bent thin glass laminates for architectural applications. Vorgetragen bei: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
- (2016): Dynamische Verformungsmessungen an Eisenbahnbrücken mittels Mikrowelleninterferometrie - Teil 1: Messverfahren. In: Bautechnik, v. 93, n. 10 (Oktober 2016).
- (2012): Deformations- und Bruchverhalten von Verbundsicherheitsglas unter dynamischer Beanspruchung. In: Stahlbau, v. 81, n. 3 (März 2012).
- (2004): Developments in Structural Glass and Glass Structures. In: Structural Engineering International, v. 14, n. 2 (Mai 2004).
Structurae kooperiert mit
