Andrew Scanlon
- (2000): Ductility-based seismic design of precast concrete large panel buildings. In: Structural Engineering and Mechanics, v. 10, n. 4 (Oktober 2000).
- (2011): Flexural behavior of concrete beams reinforced with aramid fiber reinforced polymer (AFRP) bars. In: Structural Engineering and Mechanics, v. 38, n. 4 (Mai 2011).
- (1982): Evaluation and improvement of bridge foundations. Vorgetragen bei: IABSE Symposium: Maintenance, Repair and Rehabilitation of Bridges = Entretien, réparation et modification des ponts = Unterhaltung, Instandsetzung und Sanierung von Brücken, Washington, DC (USA), 1982.
- (1989): Biaxial Tension Stiffening due to Generally Oriented Reinforcing Layers. In: Journal of Engineering Mechanics (ASCE), v. 115, n. 8 (August 1989).
- (2013): Distortional and local buckling of steel-concrete composite box-beam. In: Steel and Composite Structures, v. 14, n. 3 (März 2013).
- (2011): Pipe Heating System with Underground Water Tank for Snow Thawing and Ice Prevention on Roads and Bridge Decks. In: Journal of Cold Regions Engineering, v. 25, n. 2 (Juni 2011).
- (2008): Experimental assessment of vibration serviceability of stair systems. In: Journal of Constructional Steel Research, v. 64, n. 2 (Februar 2008).
- (2014): Reinforced Concrete Predimensioning to Enhance Optimization. Vorgetragen bei: IABSE Symposium: Engineering for Progress, Nature and People, Madrid, Spain, 3-5 September 2014.
- (2011): Simplified Test of Cracking Strength of Concrete Element Subjected to Pure Shear. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 7 (Juli 2011).
- (2013): Seismic Evaluation of an Elevated Highway Bridge in a Low Seismic Region – a Case Study. In: The Open Civil Engineering Journal, v. 4, n. 1 (Januar 2013).
- (2014): Concrete Beams with Fiber-Reinforced Polymer Shear Reinforcement. In: ACI Structural Journal, v. 111, n. 4 (Juli 2014).
- (2014): Residual strength of reinforced concrete columns subjected to blast loading. In: Magazine of Concrete Research, v. 66, n. 2 (Januar 2014).
- (2012): Confined concrete model for columns under combined axial load and bending. In: Magazine of Concrete Research, v. 64, n. 9 (September 2012).
- (2012): A Prediction Method of Tensile Young's Modulus of Concrete at Early Age. In: Advances in Civil Engineering, v. 2012 ( 2012).
- (2005): Ductility evaluation for typical existing R /C bridge columns in the eastern USA. In: Engineering Structures, v. 27, n. 2 (Januar 2005).
- (2018): Modeling of Reinforced Concrete Two-Way Floor Slab Deflections due to Construction Loading. In: Journal of Structural Engineering (ASCE), v. 144, n. 6 (Juni 2018).
- (1991): Skew Reinforced‐Concrete Panels. In: Journal of Structural Engineering (ASCE), v. 117, n. 5 (Mai 1991).
- (1987): Full-scale load test of three-span concrete highway bridge. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 14, n. 1 (Februar 1987).
- (1987): Strength evaluation of an existing concrete bridge based on core and non-destructive test data. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 14, n. 2 (April 1987).
- (1987): Field measured two-way slab deflections. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 14, n. 6 (Dezember 1987).
- (2013): Comparison of minimum thickness provisions for concrete beams in building codes and standards. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 40, n. 7 (Juli 2013).
- (2012): AASHTO LRFD Bridge Design Specifications provisions for loss of prestress. In: PCI Journal, v. 57, n. 4 (September 2012).
- (1988): Behavior of Large Panel Precast Coupled Wall Systems Subjected to Earthquake Loading. In: PCI Journal, v. 33, n. 5 (September 1988).
- (2013): Comparison of Seismic Experiments on Traditional Chinese Wood Structures and Light Wood-Framed Structures. In: Journal of Structural Engineering (ASCE), v. 139, n. 11 (November 2013).
- (1996): Response of Large Panel Precast Wall Systems: Analysis and Design. In: PCI Journal, v. 41, n. 6 (November 1996).
- (1988): Analytical modelling of large panel coupled walls for seismic loading. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 15, n. 4 (August 1988).
- (2011): The Dynamic Factor of Bridges Subjected to Linear Induction Motor Train Load. In: The Baltic Journal of Road and Bridge Engineering, v. 6, n. 3 (September 2011).
- (2009): Comparative study of structural material quantities of multi-storey linear-type residential buildings. In: The Structural Design of Tall and Special Buildings, v. 18, n. 6 (Oktober 2009).
- (2008): Comparative study of structural material quantities of high-rise residential buildings. In: The Structural Design of Tall and Special Buildings, v. 17, n. 1 (März 2008).
- (2008): Effect of Long Carbon Fibers on Deflection of One-way Members. Vorgetragen bei: 17th IABSE Congress: Creating and Renewing Urban Structures – Tall Buildings, Bridges and Infrastructure, Chicago, USA, 17-19 September 2008.
Structurae kooperiert mit
