Manu Santhanam 
- (2024): Salt weathering resilience in masonry: An accelerated laboratory study involving wind-induced variations. In: Construction and Building Materials, v. 449 (Oktober 2024).
- (2024): Performance of cementitious systems containing calcined clay in a chloride-rich environment: a review by TC-282 CCL. In: Materials and Structures, v. 57, n. 7 (13 August 2024).
- (2024): Lattice concrete: 3D printed periodic cellular structures through selective cement hydration. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2023): Limestone-Calcined Clay (LC2) as a supplementary cementitious material for concrete. In: RILEM Technical Letters, v. 8 (August 2023).
- (2023): Workability Assessment of Pumpable Structural-Grade Heavy-Weight Concrete Using Novel Coaxial Cylinder Method. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 7 (Juli 2023).
- (2021): Towards ternary binders involving limestone additions — A review. In: Cement and Concrete Research, v. 143 (Mai 2021).
- (2019): Service life and life cycle assessment of reinforced concrete systems with limestone calcined clay cement (LC3). In: Cement and Concrete Research, v. 118 (April 2019).
- (2018): Mechanical properties and durability performance of concretes with Limestone Calcined Clay Cement (LC3). In: Cement and Concrete Research, v. 107 (Mai 2018).
- (2021): On the correlations between different chloride transport parameters and their role in service life estimation. In: Sustainable and Resilient Infrastructure, v. 8, n. 2 (Januar 2021).
- (2022): Report of RILEM TC 267—TRM: Improvement and robustness study of lime mortar strength test for assessing reactivity of SCMs. In: Materials and Structures, v. 55, n. 3 (19 März 2022).
- (2023): Multiscale Fire Damage Assessment of Historical Stone Trabeated Hypostyle Halls. In: International Journal of Architectural Heritage, v. 17, n. 6 (Januar 2023).
- (2021): Performance evaluation of limestone-calcined clay (LC2) combination as a cement substitute in concrete systems subjected to short-term heat curing. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2007): Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres. In: Cement and Concrete Composites, v. 29, n. 8 (September 2007).
- (2021): A multi-analytical approach for pore structure assessment in historic lime mortars. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2020): A study on fresh properties of limestone calcined clay blended cementitious systems. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Use of supplementary cementitious materials (SCMs) in reinforced concrete systems – Benefits and limitations. In: Revista ALCONPAT, v. 10, n. 2 (30 April 2020).
- (2018): Pb removal in pervious concrete filter: Effects of accelerated carbonation and hydraulic retention time. In: Construction and Building Materials, v. 174 (Juni 2018).
- (2019): Mechanical characterization of 3D printable concrete. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2019): Performance and microstructure of bricks with protective coatings subjected to salt weathering. In: Construction and Building Materials, v. 226 (November 2019).
- (2019): Microstructure and geochemistry of lime plaster mortar from a heritage structure. In: Construction and Building Materials, v. 225 (November 2019).
- (2013): Monitoring the evolution of material structure in cement pastes and concretes using electrical property measurements. In: Construction and Building Materials, v. 49 (Dezember 2013).
- (2016): Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete. In: Construction and Building Materials, v. 120 (September 2016).
- (2017): Performance evaluation of curing compounds using durability parameters. In: Construction and Building Materials, v. 148 (September 2017).
- (2017): Performance evaluation of rapid chloride permeability test in concretes with supplementary cementitious materials. In: Materials and Structures, v. 50, n. 1 (Februar 2017).
- (2010): A new empirical test method for the optimisation of viscosity modifying agent dosage in self-compacting concrete. In: Materials and Structures, v. 43, n. 1-2 (Februar 2010).
- (2018): Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements—results of a round robin test. In: Materials and Structures, v. 51, n. 4 (August 2018).
- (2018): Performance evaluation of concretes having different supplementary cementitious material dosages belonging to different strength ranges. In: Construction and Building Materials, v. 187 (Oktober 2018).
- (2018): Reactivity tests for supplementary cementitious materials: RILEM TC 267-TRM phase 1. In: Materials and Structures, v. 51, n. 6 (Dezember 2018).
Structurae kooperiert mit
